Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel

["Boris Derzhavets" <bderzhavets@xxxxxxxxx>]

>Uhm? You can't use PCI device passthrough for SCSI or SATA drives?

>You use it to passthrough SCSI or SATA _controller_ (HBA).

Pasi,

I understand that . South Bridge ICH9(10)R is located PCI Bus.
"lspci -v"  gives me :-

00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0])                                                                
        Subsystem: ASUSTeK Computer Inc. Device 8277                                             
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 4347                             
        I/O ports at 9c00 [size=8]                                                               
        I/O ports at 9880 [size=4]                                                               
        I/O ports at 9800 [size=8]                                                               
        I/O ports at 9480 [size=4]                                                               
        I/O ports at 9400 [size=32]                                                              
        Memory at f9ffe800 (32-bit, non-prefetchable) [size=2K]                                  
        Capabilities: [80] MSI: Mask- 64bit- Count=1/16 Enable+                                  
        Capabilities: [70] Power Management version 3                                            
        Capabilities: [a8] SATA HBA <?>                                                          
        Capabilities: [b0] Vendor Specific Information <?>                                       
        Kernel driver in use: ahci                                  

How to manage afterwards ? Link would be fine.

Thanks.
Boris.

--- On Tue, 7/28/09, Pasi Kärkkäinen <pasik@xxxxxx> wrote:

From: Pasi Kärkkäinen <pasik@xxxxxx>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: "Boris Derzhavets" <bderzhavets@xxxxxxxxx>
Cc: xen-devel@xxxxxxxxxxxxxxxxxxx, "Teo En Ming" <enming.teo@xxxxxxxxxxxxxxx>
Date: Tuesday, July 28, 2009, 10:24 AM

On Tue, Jul 28, 2009 at 06:49:49AM -0700, Boris Derzhavets wrote:
> >Xen supports PCI device passthrough to paravirtualized domUs without any
> > additional hardware support/requirements.
>
> It was never my concern. But , i guess it works for SCSI drives , not SATA.
>

Uhm? You can't use PCI device passthrough for SCSI or SATA drives?

You use it to passthrough SCSI or SATA _controller_ (HBA). Or a NIC.
Or a USB controller. Or a graphics card.

-- Pasi

> Boris.
>
> --- On Tue, 7/28/09, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
>
> From: Pasi Kärkkäinen <pasik@xxxxxx>
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
> To: "Teo En Ming" <enming.teo@xxxxxxxxxxxxxxx>
> Cc: "'Boris Derzhavets'" <bderzhavets@xxxxxxxxx>, xen-devel@xxxxxxxxxxxxxxxxxxx
> Date: Tuesday, July 28, 2009, 8:48 AM
>
> On Tue, Jul 28, 2009 at 08:27:35PM +0800, Teo En Ming wrote:
> > Dear Pasi,
> >
> > I thought only paravirtualized guests allow PCI devices to be passed through
> > from the Dom 0 host? Fully virtualized guests like Windows are not able to
> > access PCI devices directly in Dom 0.
> >
>
> Xen supports PCI device passthrough to paravirtualized domUs without any
> additional hardware support/requirements.
>
> PCI device passthrough to HVM domains requires VT-d (iommu) support.
>
> > Does Core 2 Duo support Intel VT-d? Or only in Xeons?
> >
>
> VT-d support is in the chipset. Not many chipsets have it yet.. And there
> are bugs in the VT-d support in many motherboards..
>
> > I am using Xen 3.4.1 testing code right now. Does it support PCI device pass
> > through?
> >
>
> Yes, I think Xen 3.4.1 has VT-d support. Although the code is still not very
> mature, especially with graphics cards there are a lot of problems.
>
> See xen-devel and xen-users archives for more information.
>
> -- Pasi
>
> > Thank you.
> >
> > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > BEng(Hons)(Mechanical Engineering)
> >
> > Technical Support Engineer
> >
> > Information Technology Department
> >   
> > Asiasoft Online Pte Ltd
> >   
> > Tampines Central 1 #04-01 Tampines Plaza
> >   
> > Singapore 529541
> >
> > Republic of Singapore
> >   
> > Mobile Phone: +65-9648-9798
> >   
> > MSN: teoenming@xxxxxxxxxxx
> >
> >
> > -----Original Message-----
> >
> > From: Pasi Kärkkäinen <pasik@xxxxxx>
> >
> > To: "'Teo En Ming'" <enming.teo@xxxxxxxxxxxxxxx>
> >
> > Cc: 'Boris Derzhavets' <bderzhavets@xxxxxxxxx>,
> > xen-devel@xxxxxxxxxxxxxxxxxxx
> >
> > Date: Tue, 28 Jul 2009 20:32:10 +0800
> >
> > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> > Kernel
> >
> >
> >
> >
> > On Tue, Jul 28, 2009 at 07:25:58PM +0800, Teo En Ming wrote:
> >
> > > Dear Boris,
> >
> > >
> >
> > > Any way I can change the emulated display driver in Windows HVM guest to a
> >
> >
> >
> > > better one for game playing?
> >
> > >
> >
> >
> >
> > You can't really do that. Qemu (used in Xen HVM domains) only provides basic
> >
> > 2D display adapter, so it's not really suitable for gaming.
> >
> >
> >
> > If you want to experiment with unstable/development code, you could try VT-d
> >
> > to passthrough a graphics adapter (the whole device) to HVM guest.
> >
> >
> >
> > I think there are also some graphics drivers that operate through the
> >
> > network, ie. communicate with dom0 graphics hardware, but I don't have any
> >
> > links to those.
> >
> >
> >
> > Xen is mostly a server virtualization software/solution nowadays..
> >
> >
> >
> > -- Pasi
> >
> >
> >
> > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> >
> > > BEng(Hons)(Mechanical Engineering)
> >
> > >
> >
> > > Technical Support Engineer
> >
> > >
> >
> > > Information Technology Department
> >
> > >   
> >
> > > Asiasoft Online Pte Ltd
> >
> > >   
> >
> > > Tampines Central 1 #04-01 Tampines Plaza
> >
> > >   
> >
> > > Singapore 529541
> >
> > >
> >
> > > Republic of Singapore
> >
> > >   
> >
> > > Mobile Phone: +65-9648-9798
> >
> > >   
> >
> > > MSN: teoenming@xxxxxxxxxxx
> >
> > >
> >
> > >
> >
> > > -----Original Message-----
> >
> > >
> >
> > > From: Boris Derzhavets <bderzhavets@xxxxxxxxx>
> >
> > >
> >
> > > To: enming.teo@xxxxxxxxxxxxxxx, pasik@xxxxxx
> >
> > >
> >
> > > Cc: xen-devel@xxxxxxxxxxxxxxxxxxx
> >
> > >
> >
> > > Date: Tue, 28 Jul 2009 04:19:13 -0700 (PDT)
> >
> > >
> >
> > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> >
> > > Kernel
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > > It's really exciting ;)
> >
> > >
> >
> > > Boris.
> >
> > >
> >
> > > --- On Tue, 7/28/09, Teo En Ming <enming.teo@xxxxxxxxxxxxxxx> wrote:
> >
> > >
> >
> > > From: Teo En Ming <enming.teo@xxxxxxxxxxxxxxx>
> >
> > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> >
> > > Kernel
> >
> > > To: "Teo En Ming (Zhang Enming)" <enming.teo@xxxxxxxxxxxxxxx>,
> >
> > pasik@xxxxxx
> >
> > > Cc: "'Boris Derzhavets'" <bderzhavets@xxxxxxxxx>,
> >
> > > xen-devel@xxxxxxxxxxxxxxxxxxx
> >
> > > Date: Tuesday, July 28, 2009, 7:07 AM
> >
> > >
> >
> > >
> >
> > > Hi,
> >
> > >
> >
> > >
> >
> > >
> >
> > > I have also virtualized Windows XP under Xen 3.4.1 RC8 Dom 0 Kernel
> >
> > > 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit Host.
> >
> > >
> >
> > >
> >
> > >
> >
> > > Please see screenshots here:
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v
> > [http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v]
> >
> > irtual-machine-on.html
> >
> > >
> >
> > >
> >
> > >
> >
> > > Can I change the emulated display adapter driver in Windows XP HVM
> >
> > > guest under Xen to a better one so that I can play games?
> >
> > >
> >
> > >
> >
> > >
> >
> > > Thank you!!!
> >
> > >
> >
> > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> >
> > > BEng(Hons)(Mechanical Engineering)
> >
> > >
> >
> > > Technical Support Engineer
> >
> > >
> >
> > > Information Technology Department
> >
> > >   
> >
> > > Asiasoft Online Pte Ltd
> >
> > >   
> >
> > > Tampines Central 1 #04-01 Tampines Plaza
> >
> > >   
> >
> > > Singapore 529541
> >
> > >
> >
> > > Republic of Singapore
> >
> > >   
> >
> > > Mobile Phone: +65-9648-9798
> >
> > >   
> >
> > > MSN: teoenming@xxxxxxxxxxx
> >
> > >
> >
> > >
> >
> > >
> >
> > > -----Original
> >
> > > Message-----
> >
> > >   
> >
> > >  From: "Teo En Ming (Zhang Enming)"
> >
> > > <enming.teo@xxxxxxxxxxxxxxx>
> >
> > >   
> >
> > >  To: <pasik@xxxxxx>
> >
> > >   
> >
> > >  Cc: 'Boris Derzhavets' <bderzhavets@xxxxxxxxx>,
> >
> > > xen-devel@xxxxxxxxxxxxxxxxxxx
> >
> > >   
> >
> > >  Date: Tue, 28 Jul 2009 19:13:34 +0800
> >
> > >   
> >
> > >  Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> >
> > > PVOPS Kernel
> >
> > >   
> >
> > >
> >
> > >   
> >
> > >
> >
> > >   
> >
> > > Dear All,
> >
> > >     
> >
> > >
> >
> > >     
> >
> > >  I have managed to virtualize Windows 7 32-bit as a HVM guest on
> >
> > > Xen 3.4.1
> >
> > >     
> >
> > >  RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host
> >
> > > operating
> >
> > >     
> >
> > >  system.
> >
> > >     
> >
> > >
> >
> > >     
> >
> > >  Please see screenshots here:
> >
> > >     
> >
> > >
> >
> > >     
> >
> > > 
> >
> > >
> >
> > http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
> > [http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi]
> >
> >
> >
> > >
> >
> > [http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> > [http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v]
> >
> > i]
> >
> > >
> >
> > >     
> >
> > >  rtual-machine-on-xen.html
> >
> > >     
> >
> > >
> >
> > >     
> >
> > >  I have uploaded 24 pictures so far at the time of this writing.
> >
> > >     
> >
> > >
> >
> > >     
> >
> > >  Regards,
> >
> > >     
> >
> > >   
> >
> > >     
> >
> > >  Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> >
> > >     
> >
> > >  BEng(Hons)(Mechanical Engineering)
> >
> > >     
> >
> > >  Technical Support Engineer
> >
> > >     
> >
> > >  Information Technology Department
> >
> > >     
> >
> > >  Asiasoft Online Pte Ltd
> >
> > >     
> >
> > >  Tampines Central 1 #04-01 Tampines Plaza
> >
> > >     
> >
> > >  Singapore 529541
> >
> > >     
> >
> > >  Republic of Singapore
> >
> > >     
> >
> > >  Mobile: +65-9648-9798
> >
> > >     
> >
> > >  MSN: teoenming@xxxxxxxxxxx
> >
> > >     
> >
> > >
> >
> > >     
> >
> > >  -----Original Message-----
> >
> > >     
> >
> > >  From: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
> >
> > >     
> >
> > >  [mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Pasi
> >
> > > Kärkkäinen
> >
> > >     
> >
> > >  Sent: Monday, July 27, 2009 11:24 PM
> >
> > >     
> >
> > >  To: Teo En Ming
> >
> > >     
> >
> > >  Cc: Boris Derzhavets; xen-devel@xxxxxxxxxxxxxxxxxxx
> >
> > >     
> >
> > >  Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
> >
> > > Jeremy's PVOPS
> >
> > >     
> >
> > >  Kernel
> >
> > >     
> >
> > >
> >
> > >     
> >
> > >  On Mon, Jul 27, 2009 at 10:57:23PM +0800, Teo En Ming wrote:
> >
> > >     
> >
> > >  > Dear Pasi,
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > Any idea on what benchmark tools I can use to measure I/O
> >
> > > performance of
> >
> > >     
> >
> > >  my
> >
> > >     
> >
> > >  > virtual machines?
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >
> >
> > >     
> >
> > >  Well for simple streaming IO tests you can use dd, it supports
> >
> > > multiple
> >
> > >     
> >
> > >  block sizes, O_DIRECT etc.
> >
> > >     
> >
> > >
> >
> > >     
> >
> > >  If you need multithreaded/multiprocess tests, or filesystem IO
> >
> > > tests, then
> >
> > >     
> >
> > >  you need something more sophisticated.. bonnie++, ltp disktest,
> >
> > > fio, iozone
> >
> > >     
> >
> > >  etc. Google is your friend.
> >
> > >     
> >
> > >
> >
> > >     
> >
> > >  -- Pasi
> >
> > >     
> >
> > >
> >
> > >     
> >
> > >  > Thank you.
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> >
> > >     
> >
> > >  > BEng(Hons)(Mechanical Engineering)
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > Technical Support Engineer
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > Information Technology Department
> >
> > >     
> >
> > >  > 
> >
> > >     
> >
> > >  > Asiasoft Online Pte Ltd
> >
> > >     
> >
> > >  > 
> >
> > >     
> >
> > >  > Tampines Central 1 #04-01 Tampines Plaza
> >
> > >     
> >
> > >  > 
> >
> > >     
> >
> > >  > Singapore 529541
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > Republic of Singapore
> >
> > >     
> >
> > >  > 
> >
> > >     
> >
> > >  > Mobile Phone: +65-9648-9798
> >
> > >     
> >
> > >  > 
> >
> > >     
> >
> > >  > MSN: teoenming@xxxxxxxxxxx
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > -----Original Message-----
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > From: Pasi Kärkkäinen <pasik@xxxxxx>
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > To: Teo En Ming <enming.teo@xxxxxxxxxxxxxxx>
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > Cc: Boris Derzhavets <bderzhavets@xxxxxxxxx>,
> >
> > >     
> >
> > >  xen-devel@xxxxxxxxxxxxxxxxxxx
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > Date: Mon, 27 Jul 2009 18:01:55 +0300
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
> >
> > > Jeremy's PVOPS
> >
> > >     
> >
> > >  > Kernel
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > On Mon, Jul 27, 2009 at 10:06:55PM +0800, Teo En Ming wrote:
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > > Dear Boris,
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > >
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > > Based on your given information, I have managed to
> >
> > > configure static IP
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > > address inside OpenSolaris UNIX PV guest.
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > >
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > > These are the two crucial lines:
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > >
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > > echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 >
> >
> > > /etc/hostname.xnf0
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > > echo 192.168.1.102 > /etc/defaultrouter
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > >
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > > Please see screenshot here:
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > >
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > >
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > > 
> >
> > >
> >
> > http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
> > [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1]
> >
> >
> >
> > >
> >
> > [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]
> >
> > 1]
> >
> > >
> >
> > >     
> >
> > >  600-h/03.jpeg
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > > 
> >
> > >
> >
> > [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]
> >
> >
> >
> > >
> >
> > [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]
> >
> > ]
> >
> > >
> >
> > >     
> >
> > >  1600-h/03.jpeg]
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > >
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > > May I know whether there are any PV device drivers for
> >
> > > me to install to
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > > improve PV guests' performance? What are the
> >
> > > recommended benchmark tools
> >
> > >     
> >
> > >
> >
> > >     
> >
> > >  > to
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > > measure I/O performance of PV guests?
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > >
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > PV guest doesn't need any additional drivers. Like the name
> >
> > > PV says, it's
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > paravirtual, and uses the optimized drivers/interfaces
> >
> > > out-of-the-box.
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > -- Pasi
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > _______________________________________________
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > Xen-devel mailing list
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > Xen-devel@xxxxxxxxxxxxxxxxxxx
> >
> > >     
> >
> > >  >
> >
> > >     
> >
> > >  > http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]
> >
> > > [http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]]
> >
> > >     
> >
> > >  [http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]
> >
> > > [http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]]]
> >
> > >     
> >
> > >
> >
> > >     
> >
> > >  _______________________________________________
> >
> > >     
> >
> > >  Xen-devel mailing list
> >
> > >     
> >
> > >  Xen-devel@xxxxxxxxxxxxxxxxxxx
> >
> > >     
> >
> > >  http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]
> >
> > [http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]]
> >
> > >     
> >
> > >
> >
> > >     
> >
> > >  No virus found in this incoming message.
> >
> > >     
> >
> > >  Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
> > [http://www.avg.com/]]
> >
> > >     
> >
> > >  Version: 8.5.339 / Virus Database: 270.13.31/2265 - Release Date:
> >
> > > 07/26/09
> >
> > >     
> >
> > >  17:59:00
> >
> > >     
> >
> > >
> >
> > >     
> >
> > >  No virus found in this outgoing message.
> >
> > >     
> >
> > >  Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
> > [http://www.avg.com/]]
> >
> > >     
> >
> > >  Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> >
> > > 07/27/09
> >
> > >     
> >
> > >  17:59:00
> >
> > >     
> >
> > >
> >
> > >     
> >
> > >
> >
> > >     
> >
> > >
> >
> > >     
> >
> > >  _______________________________________________
> >
> > >     
> >
> > >  Xen-devel mailing list
> >
> > >     
> >
> > >  Xen-devel@xxxxxxxxxxxxxxxxxxx
> >
> > >     
> >
> > >  http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]
> >
> > [http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]]
> >
> > >     
> >
> > >
> >
> > >     
> >
> > >  No virus found in this incoming message.
> >
> > >     
> >
> > >  Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
> > [http://www.avg.com/]]
> >
> > >     
> >
> > >  Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> >
> > > 07/27/09
> >
> > >     
> >
> > >  17:59:00
> >
> > >     
> >
> > >
> >
> > >     
> >
> > >  No virus found in this outgoing message.
> >
> > >     
> >
> > >  Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
> > [http://www.avg.com/]]
> >
> > >     
> >
> > >  Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> >
> > > 07/27/09
> >
> > >     
> >
> > >  17:59:00
> >
> > >     
> >
> > >
> >
> > >     
> >
> > >
> >
> > >     
> >
> > >
> >
> > >     
> >
> > >  _______________________________________________
> >
> > >     
> >
> > >  Xen-devel mailing list
> >
> > >     
> >
> > >  Xen-devel@xxxxxxxxxxxxxxxxxxx
> >
> > >     
> >
> > >  http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]
> >
> > [http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]]
> >
> >
> >
> > _______________________________________________
> >
> > Xen-devel mailing list
> >
> > Xen-devel@xxxxxxxxxxxxxxxxxxx
> >
> > http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
> >
> >
> >
> > No virus found in this incoming message.
> >
> > Checked by AVG - www.avg.com [http://www.avg.com/]
> >
> > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date: 07/27/09
> >
> > 17:59:00
> >
> >
> >
> > No virus found in this outgoing message.
> >
> > Checked by AVG - www.avg.com [http://www.avg.com/]
> >
> > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date: 07/27/09
> >
> > 17:59:00
> >
> >
> >
> >
> >
> >
> >
> > _______________________________________________
> >
> > Xen-devel mailing list
> >
> > Xen-devel@xxxxxxxxxxxxxxxxxxx
> >
> > http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
>
>
>
>       

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

 

Checked by AVG - www.avg.com
Version: 8.5.375 / Virus Database: 270.13.33/2267 - Release Date: 07/27/09 17:59:00

ATT00046.txt
Description: Text document

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel