| |
|
 |
|
 |
|
|
|
| |
|
|
xen-devel
Some versions of guilt don't like comments following the patch file name
on the same line - if you can't find one that does then this may
help...I suspect you'll find that the file:
/home/scorbin/build/repo/xenclient-linux-2.6.27/.git/patches/master/series
has lines like:
linux-2.6.18-xen.hg-832.c0f2f398aa3c # x86: Fix interaction of NTP and
dom0->xen time updates
Remove the comments from lines like that and re-run 'guilt-push -a' from
the root of that repo and go back to the make.
Chris
Kamala Narasimhan wrote:
> I haven't encountered this error, so I am not sure. One thing that comes to
> mind is to check the version of guilt on your system and possibly upgrade to
> a newer version if there is one.
>
> Kamala
>
>> -----Original Message-----
>> From: scorbin [mailto:steve.corbin@xxxxxxxxxxxxxxxxxxx]
>> Sent: Thursday, July 02, 2009 5:03 PM
>> To: Kamala Narasimhan
>> Cc: xen-devel
>> Subject: RE: [Xen-devel] Host S3
>>
>> Hi Kamala,
>>
>> I am trying to build the XCI tree and am having some issues. The first
>> problem is that the make configuration for xenclient-ioemu is setup to
>> use alsa but libasound2 is not included in the XCI target packages. I
>> avoided this issue by modifying xen-setup and configure in the
>> xenclient-ioemu directory to not use alsa. The second issue is one I
>> can't get passed. The build fails just after setting up
>> xenclient-linux. Here is the output:
>>
>> ...
>> Initialized empty Git repository
>> in /home/scorbin/build/repo/xenclient-linux-2.6.27-pq/.git/
>> master
>> ln: target `' is not a directory: No such file or directory
>> Applying patch..hgignore.patch
>> Patch applied.
>> Applying patch..build-system-integration.patch
>> Patch applied.
>> Applying patch..linux-2.6.27.19-5.1.patch
>> Patch applied.
>> Applying patch..sync-drivers-xen.patch
>> Patch applied.
>> Applying patch..forward-port-drivers-xen.patch
>> Patch applied.
>> Applying patch..linux-2.6.18-xen.hg-832.c0f2f398aa3c # x86: Fix
>> interaction of NTP and dom0->xen time updates
>> Patch linux-2.6.18-xen.hg-832.c0f2f398aa3c # x86: Fix interaction of
>> NTP
>> and dom0->xen time updates does not exist. Aborting.
>> make[1]: *** [/home/scorbin/build/repo/xenclient-kernel-2.6.27] Error 1
>> make[1]: Leaving directory `/home/scorbin/build'
>> make: ***
>> [/home/scorbin/build/build_i686/xenclient-kernel-2.6.27/.installed]
>> Error 2
>>
>> The build system is a fresh install of 32-bit Debian 5.01.
>>
>> Any help you can provide on building XCI would be appreciated.
>>
>> - steve
>>
>>
>> On Thu, 2009-07-02 at 11:22 -0400, Kamala Narasimhan wrote:
>>> You might want to look for enter-s3.sh script. Since host S3/resume
>> is impacted by different components running on the system and since XCI
>> build already ensures that the components built by it plays along with
>> host S3, you might be better off with XCI build so as not to chase yet
>> another issue you might possibly run into that XCI build might have
>> already taken care of...
>>> Kamala
>>>
>>>> -----Original Message-----
>>>> From: scorbin [mailto:steve.corbin@xxxxxxxxxxxxxxxxxxx]
>>>> Sent: Wednesday, July 01, 2009 7:04 PM
>>>> To: Kamala Narasimhan
>>>> Cc: xen-devel
>>>> Subject: RE: [Xen-devel] Host S3
>>>>
>>>> Hi Kamala,
>>>>
>>>> Thanks for your response. Can you provide some pointers into the
>> XCI
>>>> trees where I can see the related source code changes?
>>>>
>>>> - steve
>>>>
>>>> On Wed, 2009-07-01 at 16:41 -0400, Kamala Narasimhan wrote:
>>>>> You might want to consider using the XCI build which already
>> takes
>>>> care of this issue. We have added the necessary user mode quirks
>> plus
>>>> included relevant components you would need along with appropriate
>>>> emulation library that would work with 64-bit hypervisor etc.
>>>>> Kamala
>>>>>
>>>>>> -----Original Message-----
>>>>>> From: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-devel-
>>>>>> bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of scorbin
>>>>>> Sent: Wednesday, July 01, 2009 2:26 PM
>>>>>> To: xen-devel
>>>>>> Subject: Re: [Xen-devel] Host S3
>>>>>>
>>>>>> It looks like suspend.sf.net will not work. The s2ram utility
>>>>>> requires /proc/sys/kernel/acpi_sleep_flags which does not exist
>> in
>>>> the
>>>>>> Xen patched Linux kernel. It is removed via
>> CONFIG_ACPI_PV_SLEEP.
>>>>>> So how are people using dom0 suspend/resume? Any sample
>>>> scripts/code?
>>>>>> Simply doing 'echo mem > /sys/power/state' does not restore the
>>>>>> graphics
>>>>>> card. I also tried a script I found on the web that
>> effectively
>>>> does:
>>>>>> # dump current data from the video card to the temporary file
>>>>>> cat /proc/bus/pci/$ID > $TMP_FILE
>>>>>>
>>>>>> # suspend
>>>>>> echo -n mem > /sys/power/state
>>>>>>
>>>>>> # restore video card data from the temporary file on resume
>>>>>> cat $TMP_FILE > /proc/bus/pci/$ID
>>>>>>
>>>>>> with the same result that bare Linux works but booting with Xen
>>>> does
>>>>>> not
>>>>>> restore the video card.
>>>>>>
>>>>>> - steve
>>>>>>
>>>>>> On Wed, 2009-07-01 at 13:40 -0400, scorbin wrote:
>>>>>>> I tried it on a Dell, Lenovo and 2 HPs. Upon further
>>>> investigation
>>>>>> it
>>>>>>> turns out the systems are resuming but the video card is not
>>>>>>> re-initialized. It's strange because I can use the same
>>>> procedure
>>>>>> for
>>>>>>> Linux without Xen and the video resumes properly.
>>>>>>>
>>>>>>> Searching the web I found suspend.sf.net. Is this what
>> people
>>>> are
>>>>>> using
>>>>>>> to do the video restore?
>>>>>>>
>>>>>>>
>>>>>>> On Wed, 2009-07-01 at 20:08 +0300, Tom Rotenberg wrote:
>>>>>>>> What is the hardware it didn't work for you?
>>>>>>>>
>>>>>>>> 2009/7/1 scorbin <steve.corbin@xxxxxxxxxxxxxxxxxxx>
>>>>>>>> What is the state of host suspend to ram? I
>> noticed
>>>> that
>>>>>> this
>>>>>>>> functionality was put into 3.2 with fixes in 3.3.
>> I
>>>> also
>>>>>> saw
>>>>>>>> something
>>>>>>>> recently that indicates there might be a separate
>> tree
>>>>>> where
>>>>>>>> suspend/S3
>>>>>>>> is being developed/enhanced?
>>>>>>>>
>>>>>>>> I did try Xen3.3/Ubuntu8.04 and did not get host S3
>> to
>>>>>> resume
>>>>>>>> properly.
>>>>>>>> Straight Ubuntu 8.04 suspends/resumes fine.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Xen-devel mailing list
>>>>>>>> Xen-devel@xxxxxxxxxxxxxxxxxxx
>>>>>>>> http://lists.xensource.com/xen-devel
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Xen-devel mailing list
>>>>>>> Xen-devel@xxxxxxxxxxxxxxxxxxx
>>>>>>> http://lists.xensource.com/xen-devel
>>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Xen-devel mailing list
>>>>>> Xen-devel@xxxxxxxxxxxxxxxxxxx
>>>>>> http://lists.xensource.com/xen-devel
>>>
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
|
|
| |
|
Home