| |
|
 |
|
 |
|
|
|
| |
|
|
xen-devel
Re: [Xen-devel] problems with pciback on 2.6.27 with xenclient patches
Hi Ben,
The "I/O Virtualization Enable" log message is displayed by Xen and
not by pciback in dom0.
Could you give us the output of "xm info".
Thanks,
Jean
2009/6/16 Ben Garside <ben@xxxxxxxxxxxxxxxxxx>:
> Hi, am not sure if this is the most appropriate place to post, so
> excuse me if
> it's not. I've been tearing my hair out (and there's not much left)
> trying to
> get pciback to work. I picked the xci based kernel (2.6.27 with the pq
> patches
> (using guilt) - summarised at http://xenbits.xensource.com/xenclient/)
> as it
> seems to have the best support for pciback (and ultimate goal of vga
> passthrough) for a recent kernel. Compile was ok, XEN related kernel
> parameters
> are below. When I add the iommu=1 vtd=1 pciback.permissive
> pciback.hide=(00:1b.0) to the boot args, it looks like the card is
> "seized",
> only later to be released again - no mention of I/O virtualization
> which I have
> seen in logs of a few other people. Doing an lspci in Dom0 shows the
> card as
> normal. Have tried with a few different cards (this particular pci
> device is
> onboard sound).
>
> I have tried it with xen 3.40 (release) and with unstable (currently
> 3.5). My
> machine is a Dell T5400 (xeon processor) and has all the vt-d options
> enabled in
> the bios. Oh one other thing I noticed is that if I put a spurious
> (incorrect)
> option as a boot arg, I don't get any warning that this is
> unrecognised - have
> also tried adding debug to the boot line, but it has no effect.
>
> Any help much appreciated - this is driving me crazy!
>
>
> Grub entry:
> title Xen 3.4 Kernel 2.6.27.19-5.1
> uuid 6724237b-5a56-4765-b3e0-21ce3d358ab3
> kernel /xen-3.4.gz
> module /vmlinuz-2.6.27.19-5.1 debug
> root=/dev/mapper/VolGroup0-dom0_root ro
> iommu=1 vtd=1 dom0_mem=512M pciback.permissive pciback.hide=(00:1b.0)
> console=tty0
> module /initrd-2.6.27.19-5.1.img
>
>
> Dmesg Entries:
>
> [ 0.522373] pciback: adding device ID type: 1 for 0000:00:1b.0
> [ 0.522470] pciback 0000:00:00.0: probing...
> [ 0.522554] pciback 0000:00:01.0: probing...
> [ 0.522633] pciback 0000:00:05.0: probing...
> [ 0.522713] pciback 0000:00:09.0: probing...
> [ 0.522794] pciback 0000:00:10.0: probing...
> [ 0.522875] pciback 0000:00:10.1: probing...
> [ 0.522956] pciback 0000:00:10.2: probing...
> [ 0.523037] pciback 0000:00:10.3: probing...
> [ 0.523118] pciback 0000:00:10.4: probing...
> [ 0.523199] pciback 0000:00:11.0: probing...
> [ 0.523280] pciback 0000:00:15.0: probing...
> [ 0.523361] pciback 0000:00:15.1: probing...
> [ 0.523442] pciback 0000:00:16.0: probing...
> [ 0.523523] pciback 0000:00:16.1: probing...
> [ 0.523604] pciback 0000:00:1b.0: probing...
> [ 0.523679] pciback 0000:00:1b.0: seizing device
> [ 0.523755] pciback 0000:00:1b.0: pcistub_device_alloc
> [ 0.523832] pciback 0000:00:1b.0: deferring initialization
> [ 0.523915] pciback 0000:00:1c.0: probing...
> [ 0.524067] pciback 0000:00:1d.0: probing...
> [ 0.524149] pciback 0000:00:1d.1: probing...
>
> ...
> [ 0.896278] pciback: pcistub_init_devices_late
> [ 0.896356] pciback 0000:00:1b.0: initializing...
> [ 0.896433] pciback 0000:00:1b.0: pcistub_dev_data_alloc
> [ 0.896511] pciback 0000:00:1b.0: initializing config
> [ 0.896586] pciback 0000:00:1b.0: initializing virtual
> configuration space
> [ 0.896666] pciback 0000:00:1b.0: added config field at offset 0x04
> [ 0.896741] pciback 0000:00:1b.0: added config field at offset 0x3c
> [ 0.896817] pciback 0000:00:1b.0: added config field at offset 0x3d
> [ 0.896893] pciback 0000:00:1b.0: added config field at offset 0x0c
> [ 0.896969] pciback 0000:00:1b.0: added config field at offset 0x0d
> [ 0.897044] pciback 0000:00:1b.0: added config field at offset 0x0f
> [ 0.897134] pciback 0000:00:1b.0: added config field at offset 0x10
> [ 0.897222] pciback 0000:00:1b.0: added config field at offset 0x14
> [ 0.897306] pciback 0000:00:1b.0: added config field at offset 0x18
> [ 0.897389] pciback 0000:00:1b.0: added config field at offset 0x1c
> [ 0.897472] pciback 0000:00:1b.0: added config field at offset 0x20
> [ 0.897556] pciback 0000:00:1b.0: added config field at offset 0x24
> [ 0.897639] pciback 0000:00:1b.0: added config field at offset 0x30
> [ 0.897736] pciback 0000:00:1b.0: Found capability 0x1 at 0x50
> [ 0.897812] pciback 0000:00:1b.0: added config field at offset 0x50
> [ 0.897888] pciback 0000:00:1b.0: added config field at offset 0x52
> [ 0.897966] pciback 0000:00:1b.0: added config field at offset 0x54
> [ 0.898052] pciback 0000:00:1b.0: added config field at offset 0x56
> [ 0.898128] pciback 0000:00:1b.0: added config field at offset 0x57
> [ 0.898204] pciback 0000:00:1b.0: enabling device
> [ 0.898290] pciback 0000:00:1b.0: reset device
> [ 0.932248] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 0.932353] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 0.948131] mice: PS/2 mouse device common for all mice
>
>
>
>
> 2.6.27 with patches compile args:
> # CONFIG_X86_XEN is not set
> CONFIG_X86_64_XEN=y
> CONFIG_X86_XEN_GENAPIC=y
> CONFIG_XEN_PCIDEV_FRONTEND=y
> CONFIG_XEN_PCIDEV_FE_DEBUG=y
> # CONFIG_INPUT_XEN is not set
> # CONFIG_TCG_XEN is not set
> CONFIG_XEN=y
> CONFIG_XEN_INTERFACE_VERSION=0x00030207
> # XEN
> CONFIG_XEN_PRIVILEGED_GUEST=y
> # CONFIG_XEN_UNPRIVILEGED_GUEST is not set
> CONFIG_XEN_PRIVCMD=y
> CONFIG_XEN_XENBUS_DEV=y
> CONFIG_XEN_NETDEV_ACCEL_SFC_UTIL=m
> CONFIG_XEN_BACKEND=y
> CONFIG_XEN_BLKDEV_BACKEND=y
> CONFIG_XEN_BLKDEV_TAP=y
> CONFIG_XEN_NETDEV_BACKEND=y
> # CONFIG_XEN_NETDEV_PIPELINED_TRANSMITTER is not set
> CONFIG_XEN_NETDEV_LOOPBACK=m
> CONFIG_XEN_PCIDEV_BACKEND=y
> CONFIG_XEN_PCIDEV_BACKEND_VPCI=y
> # CONFIG_XEN_PCIDEV_BACKEND_PASS is not set
> # CONFIG_XEN_PCIDEV_BACKEND_SLOT is not set
> # CONFIG_XEN_PCIDEV_BACKEND_CONTROLLER is not set
> CONFIG_XEN_PCIDEV_BE_DEBUG=y
> CONFIG_XEN_TPMDEV_BACKEND=y
> CONFIG_XEN_SCSI_BACKEND=m
> CONFIG_XEN_BLKDEV_FRONTEND=y
> CONFIG_XEN_NETDEV_FRONTEND=y
> CONFIG_XEN_NETDEV_ACCEL_SFC_FRONTEND=m
> CONFIG_XEN_SCSI_FRONTEND=m
> CONFIG_XEN_GRANT_DEV=y
> CONFIG_XEN_FRAMEBUFFER=y
> CONFIG_XEN_KEYBOARD=y
> CONFIG_XEN_DISABLE_SERIAL=y
> CONFIG_XEN_SYSFS=y
> CONFIG_XEN_NR_GUEST_DEVICES=256
> # CONFIG_XEN_COMPAT_030002_AND_LATER is not set
> # CONFIG_XEN_COMPAT_030004_AND_LATER is not set
> # CONFIG_XEN_COMPAT_030100_AND_LATER is not set
> # CONFIG_XEN_COMPAT_030200_AND_LATER is not set
> CONFIG_XEN_COMPAT_LATEST_ONLY=y
> CONFIG_XEN_COMPAT=0xffffff
> CONFIG_XEN_SMPBOOT=y
> CONFIG_XEN_DEVMEM=y
> CONFIG_XEN_BALLOON=y
> CONFIG_XEN_SCRUB_PAGES=y
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
>
>
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
|
|
| |
|
Home