Hi,
Today, I tried the staging tree (cs:19711). Then I could boot up it
without any trouble. Of course I didn't need 'noapic' option.
Best regards,
Kan
Wed, 03 Jun 2009 13:51:03 +0900, Masaki Kanno wrote:
>Hi,
>
>Xen 3.5-unstable froze since showing the following messages.
>However, I could boot up it with 'noapic' option.
>
>BTW, is my server broken?
> (XEN) MCE: The hardware reports a non fatal, correctable incident occured
> on CPU 0.
> (XEN) Bank 1: f200000000000105
>
>Best regards,
> Kan
>
> __ __ _____ ____ _ _ _
> \ \/ /___ _ __ |___ / | ___| _ _ _ __ ___| |_ __ _| |__ | | ___
> \ // _ \ '_ \ |_ \ |___ \ __| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
> / \ __/ | | | ___) | ___) |__| |_| | | | \__ \ || (_| | |_) | | __/
> /_/\_\___|_| |_| |____(_)____/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
>
>(XEN) Xen version 3.5-unstable (root@xxxxxxxxxxxxxxxxxxxx) (gcc version 4.1
>.2 20070626 (Red Hat 4.1.2-14)) Wed Jun 3 10:27:59 JST 2009
>(XEN) Latest ChangeSet: Tue Jun 02 11:50:16 2009 +0100 19698:f72d26c00002
>(XEN) Command line: loglvl=all guest_loglvl=all com1=9600,8n1 console=com1
>(XEN) Video information:
>(XEN) VGA is text mode 80x25, font 8x16
>(XEN) VBE/DDC methods: V2; EDID transfer time: 2 seconds
>(XEN) Disc information:
>(XEN) Found 1 MBR signatures
>(XEN) Found 1 EDD information structures
>(XEN) Xen-e820 RAM map:
>(XEN) 0000000000000000 - 000000000009ec00 (usable)
>(XEN) 000000000009ec00 - 00000000000a0000 (reserved)
>(XEN) 00000000000e0000 - 0000000000100000 (reserved)
>(XEN) 0000000000100000 - 000000003fef0000 (usable)
>(XEN) 000000003fef0000 - 000000003feff000 (reserved)
>(XEN) 000000003feff000 - 000000003ff00000 (ACPI NVS)
>(XEN) 000000003ff00000 - 0000000040000000 (usable)
>(XEN) 00000000fec00000 - 00000000fec10000 (reserved)
>(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
>(XEN) 00000000fff80000 - 0000000100000000 (reserved)
>(XEN) System RAM: 1023MB (1048120kB)
>(XEN) ACPI: RSDP 000F8010, 0014 (r0 PTLTD )
>(XEN) ACPI: RSDT 3FEFD053, 0034 (r1 PTLTD RSDT 13E0000 LTP 0)
>(XEN) ACPI: FACP 3FEFEEA0, 0074 (r1 QUANTA S31 13E0000 MSFT 1000)
>(XEN) ACPI: DSDT 3FEFD087, 1E19 (r1 Quanta S31 13E0000 MSFT 100000D)
>(XEN) ACPI: FACS 3FEFFFC0, 0040
>(XEN) ACPI: SPCR 3FEFEF14, 0050 (r1 PTLTD $UCRTBL$ 13E0000 PTL 1)
>(XEN) ACPI: APIC 3FEFEF64, 0074 (r1 PTLTD APIC 13E0000 LTP
> 0)
>(XEN) ACPI: BOOT 3FEFEFD8, 0028 (r1 PTLTD $SBFTBL$ 13E0000 LTP 1)
>(XEN) NUMA turned off
>(XEN) Faking a node at 0000000000000000-0000000040000000
>(XEN) Xen heap: 9MB (9668kB)
>(XEN) Domain heap initialised
>(XEN) found SMP MP-table at 000f8080
>(XEN) DMI present.
>(XEN) Using APIC driver default
>(XEN) ACPI: PM-Timer IO Port: 0x508
>(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[544,504], pm1x_evt[540,500]
>(XEN) ACPI: wakeup_vec[3fefffcc], vec_size[20]
>(XEN) ACPI: Local APIC address 0xfee00000
>(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x03] enabled)
>(XEN) Processor #3 6:11 APIC version 17
>(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>(XEN) Processor #0 6:11 APIC version 17
>(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>(XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>(XEN) IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-15
>(XEN) ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[16])
>(XEN) IOAPIC[1]: apic_id 2, version 17, address 0xfec01000, GSI 16-31
>(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>(XEN) ACPI: IRQ0 used by override.
>(XEN) ACPI: IRQ2 used by override.
>(XEN) ACPI: IRQ9 used by override.
>(XEN) Enabling APIC mode: Flat. Using 2 I/O APICs
>(XEN) Using ACPI (MADT) for SMP configuration information
>(XEN) Using scheduler: SMP Credit Scheduler (credit)
>(XEN) Initializing CPU#0
>(XEN) Detected 997.483 MHz processor.
>(XEN) CPU: L1 I cache: 16K, L1 D cache: 16K
>(XEN) CPU: L2 cache: 512K
>(XEN) Intel machine check reporting enabled on CPU#0.
>(XEN) MCE: The hardware reports a non fatal, correctable incident occured
>on CPU 0.
>(XEN) Bank 1: f200000000000105
>(XEN) mce_init: init bank1
>(XEN) mce_init: init bank3
>(XEN) mce_init: init bank4
>(XEN) CMCI: CPU0 has no CMCI support
>(XEN) CPU0: Intel(R) Pentium(R) III CPU - S 1000MHz stepping 04
>(XEN) Booting processor 1/0 eip 8c000
>(XEN) Initializing CPU#1
>(XEN) CPU: L1 I cache: 16K, L1 D cache: 16K
>(XEN) CPU: L2 cache: 512K
>(XEN) Intel machine check reporting enabled on CPU#1.
>(XEN) MCE: The hardware reports a non fatal, correctable incident occured
>on CPU 0.
>(XEN) Bank 1: f200000000000181
>(XEN) mce_init: init bank1
>(XEN) mce_init: init bank3
>(XEN) mce_init: init bank4
>(XEN) CMCI: CPU1 has no CMCI support
>(XEN) CPU1: Intel(R) Pentium(R) III CPU - S 1000MHz stepping 04
>(XEN) Total of 2 processors activated.
>(XEN) ENABLING IO-APIC IRQs
>(XEN) -> Using new ACK method
>(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
>(XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC
>(XEN) ...trying to set up timer (IRQ0) through the 8259A ... failed.
>(XEN) ...trying to set up timer as Virtual Wire IRQ... works.
>(XEN) checking TSC synchronization across 2 CPUs: passed.
>(XEN) Platform timer is 3.579MHz ACPI PM Timer
>(XEN) Brought up 2 CPUs
>(XEN) APIC error on CPU1: 00(40)
>(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
>(XEN) I/O virtualisation disabled
>(XEN) CPUIDLE: disabled due to no HPET. Force enable with 'cpuidle'.
>(XEN) ACPI sleep modes: S3
>(XEN) mcheck_poll: Machine check polling timer started.
>(XEN) *** LOADING DOMAIN 0 ***
>(XEN) Xen kernel: 32-bit, PAE, lsb
>(XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0xc0100000 -> 0xc048a47c
>(XEN) PHYSICAL MEMORY ARRANGEMENT:
>(XEN) Dom0 alloc.: 000000003d000000->000000003e000000 (236849 pages to
>be allocated)
>(XEN) VIRTUAL MEMORY ARRANGEMENT:
>(XEN) Loaded kernel: c0100000->c048a47c
>(XEN) Init. ramdisk: c048b000->c09d1800
>(XEN) Phys-Mach map: c09d2000->c0abd4c4
>(XEN) Start info: c0abe000->c0abe47c
>(XEN) Page tables: c0abf000->c0aca000
>(XEN) Boot stack: c0aca000->c0acb000
>(XEN) TOTAL: c0000000->c0c00000
>(XEN) ENTRY ADDRESS: c0100000
>(XEN) Dom0 has maximum 2 VCPUs
>(XEN) APIC error on CPU0: 00(40)
>(XEN) Scrubbing Free RAM: done.
>(XEN) Xen trace buffers: disabled
>(XEN) Std. Loglevel: All
>(XEN) Guest Loglevel: All
>(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input
>to Xen)
>(XEN) Freed 116kB init memory.
>(XEN) APIC error on CPU0: 40(40)
>(XEN) io_apic.c:2130:
>(XEN) ioapic_guest_write: apic=0, pin=2, old_irq=-1, new_irq=0
>(XEN) ioapic_guest_write: old_entry=00010000, new_entry=000009f0
>(XEN) ioapic_guest_write: Attempt to add IO-APIC pin for in-use IRQ!
>(
>
>
>
>_______________________________________________
>Xen-devel mailing list
>Xen-devel@xxxxxxxxxxxxxxxxxxx
>http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home