WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-devel

RE: [Xen-devel] Re: [RFC] RAS(Part II)--MCA enalbing in XEN

To: Christoph Egger <Christoph.Egger@xxxxxxx>
Subject: RE: [Xen-devel] Re: [RFC] RAS(Part II)--MCA enalbing in XEN
From: "Jiang, Yunhong" <yunhong.jiang@xxxxxxxxx>
Date: Thu, 5 Mar 2009 23:19:40 +0800
Accept-language: en-US
Acceptlanguage: en-US
Cc: "xen-devel@xxxxxxxxxxxxxxxxxxx" <xen-devel@xxxxxxxxxxxxxxxxxxx>, Gavin Maltby <Gavin.Maltby@xxxxxxx>, "Ke, Liping" <liping.ke@xxxxxxxxx>, "Frank.Vanderlinden@xxxxxxx" <Frank.Vanderlinden@xxxxxxx>, Keir Fraser <keir.fraser@xxxxxxxxxxxxx>, "Kleen, Andi" <andi.kleen@xxxxxxxxx>
Delivery-date: Thu, 05 Mar 2009 07:20:14 -0800
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
In-reply-to: <200903051553.34344.Christoph.Egger@xxxxxxx>
List-help: <mailto:xen-devel-request@lists.xensource.com?subject=help>
List-id: Xen developer discussion <xen-devel.lists.xensource.com>
List-post: <mailto:xen-devel@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=unsubscribe>
References: <C5BF30B3.2C2B%keir.fraser@xxxxxxxxxxxxx> <49AC1BA8.3090302@xxxxxxx> <E2263E4A5B2284449EEBD0AAB751098401C7CE8D98@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <200903051553.34344.Christoph.Egger@xxxxxxx>
Sender: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
Thread-index: AcmdojwtT46ZzGPlQbunuXPpOuFiqgAAIyzg
Thread-topic: [Xen-devel] Re: [RFC] RAS(Part II)--MCA enalbing in XEN
Christoph Egger <mailto:Christoph.Egger@xxxxxxx> wrote:
> MC_ACT_CACHE_SHIRNK  <-- typo. should be MC_ACT_CACHE_SHRINK

Ahh, yes, I will fix it.

> 
> The L3 cache index disable feature works like this:
> 
> You read the bits 17:6  from the MSR 0xC0000408 (which is MC4_MISC1)
> and write it into the index field. This MSR does not belong to
> the standard
> mc bank data and is therefore provided by mcinfo_extended.
> The index field are the bits 11:0 of the PCI function 3 register "L3 Cache
> Index Disable". 

So what's the offset of "L3 Cache Index Disable"? Is it in 256 byte or 4K byte?

For the PCI access, I'd prefer to have xen to control all these, i.e. even if 
dom0 want to disable the L3 cache, it is done through a hypercall. The reason 
is, Xen control the CPU, so keep it in Xen will make things simpler.

Of course, it is ok for me too, if you want to keep Xen for #MC handler and 
Dom0 for CE handler.

> 
> Why is the recover action bound to the bank ?
> I would like to see a struct mcinfo_recover  rather extending
> struct mcinfo_bank.  That gives us flexibility.

I'd get input from Frank or Gavin. Place mcinfo_recover in mcinfo_back has 
advantage of keep connection of the error source and the action, but it do make 
the mcinfo_bank more complex. Or we can keep the cpu/bank information in the 
mcinfo_recover also, so that we keep the flexibility and don't lose the 
connection.

Thanks
Yunhong Jiang



> 
> Christoph
> 
> 
> On Thursday 05 March 2009 09:31:27 Jiang, Yunhong wrote:
>> Christoph/Frank, Followed is the interface definition, please have a look.
>> 
>> Thanks
>> Yunhong Jiang
>> 
>> 1) Interface between Xen/dom0 for passing xen's recovery action information
>> to dom0. Usage model: After offlining broken page, Xen might pass its
>> page-offline recovery action result information to dom0. Dom0 will save the
>> information in non-volatile memory for further proactive actions, such as
>> offlining the easy-broken page early when doing next reboot.
>> 
>> 
>> struct page_offline_action
>> {
>>     /* Params for passing the offlined page number to DOM0 */     uint64_t
>>     mfn; uint64_t status; /* Similar to page offline hypercall */ };
>> 
>> struct cpu_offline_action
>> {
>>     /* Params for passing the identity of the offlined CPU to DOM0 */    
>>     uint32_t mc_socketid; uint16_t mc_coreid;
>>     uint16_t mc_core_threadid;
>> };
>> 
>> struct cache_shrink_action
>> {
>>     /* TBD, Christoph, please fill it */
>> };
>> 
>> /* Recover action flags, giving recovery result information to guest */
>> /* Recovery successfully after taking certain recovery actions below */
>> #define REC_ACT_RECOVERED      (0x1 << 0)
>> /* For solaris's usage that dom0 will take ownership when crash */
>> #define REC_ACT_RESET          (0x1 << 2)
>> /* No action is performed by XEN */
>> #define REC_ACT_INFO           (0x1 << 3)
>> 
>> /* Recover action type definition, valid only when flags &
>> REC_ACT_RECOVERED */ #define MC_ACT_PAGE_OFFLINE 1
>> #define MC_ACT_CPU_OFFLINE   2
>> #define MC_ACT_CACHE_SHIRNK 3
>> 
>> struct recovery_action
>> {
>>     uint8_t flags;
>>     uint8_t action_type;
>>     union
>>     {
>>         struct page_offline_action page_retire;
>>         struct cpu_offline_action cpu_offline;
>>         struct cache_shrink_action cache_shrink;
>>         uint8_t pad[MAX_ACTION_SIZE];
>>     } action_info;
>> }
>> 
>> struct mcinfo_bank {
>>     struct mcinfo_common common;
>> 
>>     uint16_t mc_bank; /* bank nr */
>>     uint16_t mc_domid; /* Usecase 5: domain referenced by mc_addr on dom0
>>                         * and if mc_addr is valid. Never valid on DomU. */
>>     uint64_t mc_status; /* bank status */
>>     uint64_t mc_addr;   /* bank address, only valid
>>                          * if addr bit is set in mc_status */     uint64_t
>>     mc_misc; uint64_t mc_ctrl2;
>>     uint64_t mc_tsc;
>>     /* Recovery action is performed per bank */
>>     struct recovery_action action;
>> };
>> 
>> 2) Below two interfaces are for MCA processing internal use.
>>     a. pre_handler will be called earlier in MCA ISR context, mainly for
>> early need_reset detection for avoiding log missing (flag MCA_RESET).
>> Also, pre_handler might be able to find the impacted domain if possible.
>>     b. mca_error_handler is actually a (error_action_index,
>> recovery_handler pointer) pair. The defined recovery_handler function
>> performs the actual recovery operations in softIrq context after the
>> per_bank MCA error matching the corresponding mca_code index. If
>> pre_handler can't judge the impacted domain, recovery_handler must figure
>> it out. 
>> 
>> /* Error has been recovered successfully */
>> #define MCA_RECOVERD    0
>> /* Error impact one guest as stated in owner field */ #define MCA_OWNER   
>> 1 /* Error can't be recovered and need reboot system */ #define MCA_RESET 
>> 2 /* Error should be handled in softIRQ context */
>> #define MCA_MORE_ACTION 3
>> 
>> struct mca_handle_result
>> {
>>     uint32_t flags;
>>     /* Valid only when flags & MCA_OWNER */
>>     domid_d owner;
>>     /* valid only when flags & MCA_RECOVERD */
>>     struct  recovery_action *action;
>> };
>> 
>> struct mca_error_handler
>> {
>>     /*
>>      * Assume we will need only architecture defined code. If the index
>> can't be setup by * mca_code, we will add a function to do the (index,
>> recovery_handler) mapping check. * This mca_code represents the recovery
>> handler pointer index for identifying this * particular error's
>>     corresponding recover action */
>>     uint16_t mca_code;
>> 
>>     /* Handler to be called in softIRQ handler context */
>>     int recovery_handler(struct mcinfo_bank *bank,
>>                      struct mcinfo_global *global,
>>                      struct mcinfo_extended *extention,
>>                      struct mca_handle_result *result);
>> 
>> };
>> 
>> struct mca_error_handler intel_mca_handler[] =
>> {
>>     ....
>> };
>> 
>> struct mca_error_handler amd_mca_handler[] =
>> {
>>     ....
>> };
>> 
>> 
>> /* HandlVer to be called in MCA ISR in MCA context */
>> int intel_mca_pre_handler(struct cpu_user_regs *regs,
>>                                 struct mca_handle_result *result);
>> 
>> int amd_mca_pre_handler(struct cpu_user_regs *regs,
>>                             struct mca_handle_result *result);
>> 
>> Frank.Vanderlinden@xxxxxxx <mailto:Frank.Vanderlinden@xxxxxxx> wrote:
>>> Jiang, Yunhong wrote:
>>>> Frank/Christopher, can you please give more comments for it, or you are
>>>> OK with this? For the action reporting mechanism, we will send out a
>>>> proposal for review soon.
>>> 
>>> I'm ok with this. We need a little more information on the AMD
>>> mechanism, but it seems to me that we can fit this in.
>>> 
>>> Sometime this week, I'll also send out the last of our changes that
>>> haven't been sent upstream to xen-unstable yet. Maybe we can combine
>>> some things in to one patch, like the telemetry handling changes that
>>> Gavin did. The other changes are error injection (for debugging) and
>>> panic crash dump support for our FMA tools, but those are probably only
>>> interesting to us. 
>>> 
>>> - Frank
> 
> 
> 
> --
> ---to satisfy European Law for business letters:
> Advanced Micro Devices GmbH
> Karl-Hammerschmidt-Str. 34, 85609 Dornach b. Muenchen
> Geschaeftsfuehrer: Jochen Polster, Thomas M. McCoy, Giuliano Meroni
> Sitz: Dornach, Gemeinde Aschheim, Landkreis Muenchen
> Registergericht Muenchen, HRB Nr. 43632
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel