Re: [Xen-devel] xend start error

[Boris Derzhavets <bderzhavets@xxxxxxxxx>]

 Patch applied. Issue seems to be gone. dmesg's report follows bellow.
 Thanks.
 Boris

# dmesg

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.29-rc5-tip (root@ServerXen331) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu12) ) #2 SMP Wed Feb 18 03:04:57 EST 2009
[    0.000000] Command line: root=/dev/sdb14 ro console=tty0 pci=nomsi
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  Xen: 0000000000000000 - 000000000009ec00 (usable)
[    0.000000]  Xen: 000000000009ec00 - 0000000000100000 (reserved)
[    0.000000]  Xen: 0000000000100000 - 000000000b965000 (usable)
[    0.000000]  Xen: 000000000b965000 - 000000000bb66000 (reserved)
[    0.000000]  Xen: 000000000bb66000 - 0000000040000000 (usable)
[    0.000000]  Xen: 00000000cff80000 - 00000000cff8e000 (ACPI data)
[    0.000000]  Xen: 00000000cff8e000 - 00000000cffe0000 (ACPI NVS)
[    0.000000]  Xen: 00000000cffe0000 - 00000000d0000000 (reserved)
[    0.000000]  Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  Xen: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.4 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] last_pfn = 0x40000 max_arch_pfn = 0x100000000
[    0.000000] init_memory_mapping: 0000000000000000-0000000040000000
[    0.000000]  0000000000 - 0040000000 page 4k
[    0.000000] kernel direct mapping tables up to 40000000 @ bbc9000-bdcb000
[    0.000000] last_map_addr: 40000000 end: 40000000
[    0.000000] RAMDISK: 008ea000 - 0b964c00
[    0.000000] ACPI: RSDP 000FBB80, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT CFF80000, 003C (r1 A_M_I_ OEMRSDT  10000730 MSFT       97)
[    0.000000] ACPI: FACP CFF80200, 0084 (r2 A_M_I_ OEMFACP  10000730 MSFT       97)
[    0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
[    0.000000] ACPI: DSDT CFF805C0, 8E13 (r1  A0840 A0840001        1 INTL 20060113)
[    0.000000] ACPI: FACS CFF8E000, 0040
[    0.000000] ACPI: APIC CFF80390, 006C (r1 A_M_I_ OEMAPIC  10000730 MSFT       97)
[    0.000000] ACPI: MCFG CFF80400, 003C (r1 A_M_I_ OEMMCFG  10000730 MSFT       97)
[    0.000000] ACPI: OEMB CFF8E040, 0081 (r1 A_M_I_ AMI_OEM  10000730 MSFT       97)
[    0.000000] ACPI: HPET CFF893E0, 0038 (r1 A_M_I_ OEMHPET  10000730 MSFT       97)
[    0.000000] ACPI: OSFR CFF89420, 00B0 (r1 A_M_I_ OEMOSFR  10000730 MSFT       97)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] (6 early reservations) ==> bootmem [0000000000 - 0040000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [000bb66000 - 000bbc9000]   XEN PAGETABLES ==> [000bb66000 - 000bbc9000]
[    0.000000]   #2 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #3 [0000200000 - 00008e9d20]    TEXT DATA BSS ==> [0000200000 - 00008e9d20]
[    0.000000]   #4 [00008ea000 - 000b964c00]          RAMDISK ==> [00008ea000 - 000b964c00]
[    0.000000]   #5 [000bbc9000 - 000bd65000]          PGTABLE ==> [000bbc9000 - 000bd65000]
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00100000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x0000b965
[    0.000000]     0: 0x0000bb66 -> 0x00040000
[    0.000000] On node 0 totalpages: 261517
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1774 pages reserved
[    0.000000]   DMA zone: 2152 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 3528 pages used for memmap
[    0.000000]   DMA32 zone: 254007 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:8ff80000)
[    0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Allocating 86016 bytes of per cpu data
[    0.000000] trying to map vcpu_info 0 at ffff88000bd7c020, mfn 21bd7c, offset 32
[    0.000000] cpu 0 using vcpu_info at ffff88000bd7c020
[    0.000000] trying to map vcpu_info 1 at ffff88000bd91020, mfn 21bd91, offset 32
[    0.000000] cpu 1 using vcpu_info at ffff88000bd91020
[    0.000000] Xen: using vcpu_info placement
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256159
[    0.000000] Kernel command line: root=/dev/sdb14 ro console=tty0 pci=nomsi
[    0.000000] Initializing CPU#0
[    0.000000] NR_IRQS:1280
[    0.000000] xen: allocated irq 9 for acpi 9
[    0.000000] xen_allocate_pirq: returning irq 9 for gsi 9
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] Detected 3005.644 MHz processor.
[    0.010000] Console: colour VGA+ 80x25
[    0.010000] console [tty0] enabled
[    0.010000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.010000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.010000] allocated 10485760 bytes of page_cgroup
[    0.010000] please try cgroup_disable=memory option if you don't want
[    0.010000] Checking aperture...
[    0.010000] No AGP bridge found
[    0.010000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.010000] xen_swiotlb_fixup: buf=ffff88000d7f0000 size=67108864
[    0.010000] xen_swiotlb_fixup: buf=ffff880011850000 size=32768
[    0.010000] Placing 64MB software IO TLB between ffff88000d7f0000 - ffff8800117f0000
[    0.010000] software IO TLB at phys 0xd7f0000 - 0x117f0000
[    0.010000] Memory: 763172k/1048576k available (3284k kernel code, 2508k absent, 282220k reserved, 1808k data, 456k init)
[    0.010000] Xen: using vcpuop timer interface
[    0.010000] installing Xen timer for CPU 0
[    0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6011.28 BogoMIPS (lpj=30056440)
[    0.010000] Security Framework initialized
[    0.010000] SELinux:  Disabled at boot.
[    0.010000] Mount-cache hash table entries: 256
[    0.010000] Initializing cgroup subsys ns
[    0.010000] Initializing cgroup subsys cpuacct
[    0.010000] Initializing cgroup subsys memory
[    0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.010000] CPU: L2 cache: 6144K
[    0.010000] CPU: Physical Processor ID: 0
[    0.010000] CPU: Processor Core ID: 0
[    0.010000] SMP alternatives: switching to UP code
[    0.025180] ACPI: Core revision 20081204
[    0.040081] cpu 0 spinlock event irq 25
[    0.041285] installing Xen timer for CPU 1
[    0.041337] cpu 1 spinlock event irq 31
[    0.041402] SMP alternatives: switching to SMP code
[    0.000005] Initializing CPU#1
[    0.000038] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000041] CPU: L2 cache: 6144K
[    0.000044] CPU: Physical Processor ID: 0
[    0.000046] CPU: Processor Core ID: 0
[    0.070408] Brought up 2 CPUs
[    0.070653] CPU0 attaching sched-domain:
[    0.070656]  domain 0: span 0-1 level CPU
[    0.070660]   groups: 0 1
[    0.070670] CPU1 attaching sched-domain:
[    0.070672]  domain 0: span 0-1 level CPU
[    0.070676]   groups: 1 0
[    0.071246] net_namespace: 1840 bytes
[    0.071291] Booting paravirtualized kernel on Xen
[    0.071335] Xen version: 3.4-unstable (preserve-AD) (dom0)
[    0.071516] Grant table initialized
[    0.071582] Time:  8:11:57  Date: 02/18/09
[    0.071677] NET: Registered protocol family 16
[    0.072065] xenbus_probe_init ok
[    0.072371] ACPI: bus type pci registered
[    0.072940] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.072987] PCI: Not using MMCONFIG.
[    0.073029] PCI: Using configuration type 1 for base access
[    0.075852] bio: create slab <bio-0> at 0
[    0.078803] ACPI: EC: Look up EC in DSDT
[    0.094982] ACPI: Interpreter enabled
[    0.095026] ACPI: (supports S0 S1 S3 S5)
[    0.095209] ACPI: Using IOAPIC for interrupt routing
[    0.095309] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.098654] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.158109] PCI: Using MMCONFIG at e0000000 - efffffff
[    0.173222] ACPI: No dock devices found.
[    0.173331] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.173658] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.173707] pci 0000:00:01.0: PME# disabled
[    0.173891] pci 0000:00:1a.0: reg 20 io port: [0xa800-0xa81f]
[    0.174027] pci 0000:00:1a.1: reg 20 io port: [0xa880-0xa89f]
[    0.174162] pci 0000:00:1a.2: reg 20 io port: [0xac00-0xac1f]
[    0.174301] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf9fffc00-0xf9ffffff]
[    0.174405] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.174454] pci 0000:00:1a.7: PME# disabled
[    0.174573] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf9ff8000-0xf9ffbfff]
[    0.174658] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.174707] pci 0000:00:1b.0: PME# disabled
[    0.174863] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.174911] pci 0000:00:1c.0: PME# disabled
[    0.175075] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.175124] pci 0000:00:1c.4: PME# disabled
[    0.175284] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.175332] pci 0000:00:1c.5: PME# disabled
[    0.175477] pci 0000:00:1d.0: reg 20 io port: [0xa080-0xa09f]
[    0.175613] pci 0000:00:1d.1: reg 20 io port: [0xa400-0xa41f]
[    0.175748] pci 0000:00:1d.2: reg 20 io port: [0xa480-0xa49f]
[    0.175887] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf9fff800-0xf9fffbff]
[    0.175990] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.176040] pci 0000:00:1d.7: PME# disabled
[    0.176303] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[    0.176361] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[    0.176409] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[    0.176588] pci 0000:00:1f.2: reg 10 io port: [0x9c00-0x9c07]
[    0.176598] pci 0000:00:1f.2: reg 14 io port: [0x9880-0x9883]
[    0.176609] pci 0000:00:1f.2: reg 18 io port: [0x9800-0x9807]
[    0.176619] pci 0000:00:1f.2: reg 1c io port: [0x9480-0x9483]
[    0.176629] pci 0000:00:1f.2: reg 20 io port: [0x9400-0x941f]
[    0.176640] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf9ffe800-0xf9ffefff]
[    0.176706] pci 0000:00:1f.2: PME# supported from D3hot
[    0.176753] pci 0000:00:1f.2: PME# disabled
[    0.176851] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf9fff400-0xf9fff4ff]
[    0.176877] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[    0.176972] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[    0.176990] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[    0.177008] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
[    0.177018] pci 0000:01:00.0: reg 24 io port: [0xbc00-0xbc7f]
[    0.177029] pci 0000:01:00.0: reg 30 32bit mmio: [0xfe8e0000-0xfe8fffff]
[    0.177154] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff]
[    0.177160] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfe8fffff]
[    0.177169] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[    0.177261] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf8f00000-0xf8ffffff]
[    0.177408] pci 0000:03:00.0: reg 24 32bit mmio: [0xfeafe000-0xfeafffff]
[    0.177422] pci 0000:03:00.0: reg 30 32bit mmio: [0xfeae0000-0xfeaeffff]
[    0.177473] pci 0000:03:00.0: PME# supported from D3hot
[    0.177522] pci 0000:03:00.0: PME# disabled
[    0.177643] pci 0000:03:00.1: reg 10 io port: [0xdc00-0xdc07]
[    0.177657] pci 0000:03:00.1: reg 14 io port: [0xd880-0xd883]
[    0.177671] pci 0000:03:00.1: reg 18 io port: [0xd800-0xd807]
[    0.177684] pci 0000:03:00.1: reg 1c io port: [0xd480-0xd483]
[    0.177698] pci 0000:03:00.1: reg 20 io port: [0xd400-0xd40f]
[    0.177857] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff]
[    0.177864] pci 0000:00:1c.4: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[    0.177970] pci 0000:02:00.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff]
[    0.177984] pci 0000:02:00.0: reg 18 io port: [0xc800-0xc8ff]
[    0.178027] pci 0000:02:00.0: reg 30 32bit mmio: [0xfe9c0000-0xfe9dffff]
[    0.178094] pci 0000:02:00.0: supports D1 D2
[    0.178097] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.178147] pci 0000:02:00.0: PME# disabled
[    0.178269] pci 0000:00:1c.5: bridge io port: [0xc000-0xcfff]
[    0.178276] pci 0000:00:1c.5: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
[    0.178353] pci 0000:05:03.0: reg 10 32bit mmio: [0xfebff000-0xfebfffff]
[    0.178439] pci 0000:05:03.0: supports D1 D2
[    0.178442] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
[    0.178491] pci 0000:05:03.0: PME# disabled
[    0.178592] pci 0000:05:04.0: reg 10 io port: [0xe800-0xe8ff]
[    0.178604] pci 0000:05:04.0: reg 14 32bit mmio: [0xfebfec00-0xfebfecff]
[    0.178650] pci 0000:05:04.0: reg 30 32bit mmio: [0xfebc0000-0xfebdffff]
[    0.178684] pci 0000:05:04.0: supports D1 D2
[    0.178687] pci 0000:05:04.0: PME# supported from D1 D2 D3hot D3cold
[    0.178736] pci 0000:05:04.0: PME# disabled
[    0.178849] pci 0000:00:1e.0: transparent bridge
[    0.178896] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[    0.178903] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[    0.178955] pci_bus 0000:00: on NUMA node 0
[    0.178962] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.179168] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    0.179241] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.179400] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.179479] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[    0.179562] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[    0.202296] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.202825] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.203352] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.203879] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[    0.204406] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.205001] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.205528] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.206054] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.206673] ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - 67, should be 5E [20081204]
[    0.206874] xen_balloon: Initialising balloon driver.
[    0.207389] SCSI subsystem initialized
[    0.207534] libata version 3.00 loaded.
[    0.207862] PCI: Using ACPI for IRQ routing
[    0.250038] NET: Registered protocol family 8
[    0.250090] NET: Registered protocol family 20
[    0.250197] NetLabel: Initializing
[    0.250240] NetLabel:  domain hash size = 128
[    0.250283] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.250339] NetLabel:  unlabeled traffic allowed by default
[    0.251175] Xen: Initializing Xen DMA ops
[    0.251218] Xen: Enabling DMA fallback to swiotlb
[    0.290033] pnp: PnP ACPI init
[    0.290094] ACPI: bus type pnp registered
[    0.290650] xen: registering gsi 8 triggering 1 polarity 0
[    0.290653] xen_allocate_pirq: returning irq 8 for gsi 8
[    0.290698] xen: --> irq=8
[    0.290700] xen_set_ioapic_routing: irq 8 gsi 8 vector 80 ioapic 0 pin 8 triggering 1 polarity 0
[    0.290930] xen: registering gsi 13 triggering 1 polarity 0
[    0.290933] xen_allocate_pirq: returning irq 13 for gsi 13
[    0.290978] xen: --> irq=13
[    0.290980] xen_set_ioapic_routing: irq 13 gsi 13 vector 120 ioapic 0 pin 13 triggering 1 polarity 0
[    0.291801] xen: registering gsi 6 triggering 1 polarity 0
[    0.291804] xen_allocate_pirq: returning irq 6 for gsi 6
[    0.291848] xen: --> irq=6
[    0.291851] xen_set_ioapic_routing: irq 6 gsi 6 vector 64 ioapic 0 pin 6 triggering 1 polarity 0
[    0.293392] xen: registering gsi 4 triggering 1 polarity 0
[    0.293395] xen_allocate_pirq: returning irq 4 for gsi 4
[    0.293439] xen: --> irq=4
[    0.293442] xen_set_ioapic_routing: irq 4 gsi 4 vector 48 ioapic 0 pin 4 triggering 1 polarity 0
[    0.293898] xen: registering gsi 1 triggering 1 polarity 0
[    0.293901] xen_allocate_pirq: returning irq 1 for gsi 1
[    0.293946] xen: --> irq=1
[    0.293948] xen_set_ioapic_routing: irq 1 gsi 1 vector 32 ioapic 0 pin 1 triggering 1 polarity 0
[    0.295565] pnp: PnP ACPI: found 15 devices
[    0.295610] ACPI: ACPI bus type pnp unregistered
[    0.295664] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[    0.295717] system 00:07: ioport range 0x290-0x297 has been reserved
[    0.295767] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.295813] system 00:08: ioport range 0x800-0x87f has been reserved
[    0.295858] system 00:08: ioport range 0x480-0x4bf has been reserved
[    0.295904] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.295950] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.295996] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[    0.296042] system 00:08: iomem range 0xffa00000-0xffafffff has been reserved
[    0.296088] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
[    0.296134] system 00:08: iomem range 0xffe00000-0xffefffff has been reserved
[    0.296180] system 00:08: iomem range 0xfff00000-0xfffffffe has been reserved
[    0.296231] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[    0.296278] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.296329] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[    0.296380] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[    0.296426] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
[    0.296472] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[    0.296518] system 00:0e: iomem range 0x100000-0xcfffffff could not be reserved
[    0.301815] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.301862] pci 0000:00:01.0:   IO window: 0xb000-0xbfff
[    0.301911] pci 0000:00:01.0:   MEM window: 0xfa000000-0xfe8fffff
[    0.301959] pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[    0.302021] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[    0.302065] pci 0000:00:1c.0:   IO window: disabled
[    0.302114] pci 0000:00:1c.0:   MEM window: disabled
[    0.302161] pci 0000:00:1c.0:   PREFETCH window: 0x000000f8f00000-0x000000f8ffffff
[    0.302224] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[    0.302271] pci 0000:00:1c.4:   IO window: 0xd000-0xdfff
[    0.302320] pci 0000:00:1c.4:   MEM window: 0xfea00000-0xfeafffff
[    0.302369] pci 0000:00:1c.4:   PREFETCH window: disabled
[    0.302420] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02
[    0.302467] pci 0000:00:1c.5:   IO window: 0xc000-0xcfff
[    0.302516] pci 0000:00:1c.5:   MEM window: 0xfe900000-0xfe9fffff
[    0.302565] pci 0000:00:1c.5:   PREFETCH window: disabled
[    0.302617] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[    0.302664] pci 0000:00:1e.0:   IO window: 0xe000-0xefff
[    0.302713] pci 0000:00:1e.0:   MEM window: 0xfeb00000-0xfebfffff
[    0.302762] pci 0000:00:1e.0:   PREFETCH window: 0x00000050000000-0x000000500fffff
[    0.302833] xen: registering gsi 16 triggering 0 polarity 1
[    0.302842] xen: --> irq=16
[    0.302845] xen_set_ioapic_routing: irq 16 gsi 16 vector 160 ioapic 0 pin 16 triggering 0 polarity 1
[    0.302905] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.302954] pci 0000:00:01.0: setting latency timer to 64
[    0.302966] xen: registering gsi 17 triggering 0 polarity 1
[    0.302971] xen: --> irq=17
[    0.302974] xen_set_ioapic_routing: irq 17 gsi 17 vector 168 ioapic 0 pin 17 triggering 0 polarity 1
[    0.303034] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.303083] pci 0000:00:1c.0: setting latency timer to 64
[    0.303095] xen: registering gsi 17 triggering 0 polarity 1
[    0.303098] xen_allocate_pirq: returning irq 17 for gsi 17
[    0.303142] xen: --> irq=17
[    0.303144] xen_set_ioapic_routing: irq 17 gsi 17 vector 168 ioapic 0 pin 17 triggering 0 polarity 1
[    0.303202] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.303252] pci 0000:00:1c.4: setting latency timer to 64
[    0.303263] xen: registering gsi 16 triggering 0 polarity 1
[    0.303266] xen_allocate_pirq: returning irq 16 for gsi 16
[    0.303310] xen: --> irq=16
[    0.303312] xen_set_ioapic_routing: irq 16 gsi 16 vector 160 ioapic 0 pin 16 triggering 0 polarity 1
[    0.303370] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.303420] pci 0000:00:1c.5: setting latency timer to 64
[    0.303431] pci 0000:00:1e.0: setting latency timer to 64
[    0.303437] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.303439] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.303442] pci_bus 0000:01: resource 0 io:  [0xb000-0xbfff]
[    0.303445] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfe8fffff]
[    0.303448] pci_bus 0000:01: resource 2 mem: [0xd0000000-0xdfffffff]
[    0.303450] pci_bus 0000:01: resource 3 mem: [0x0-0x0]
[    0.303453] pci_bus 0000:04: resource 0 mem: [0x0-0x0]
[    0.303455] pci_bus 0000:04: resource 1 mem: [0x0-0x0]
[    0.303458] pci_bus 0000:04: resource 2 mem: [0xf8f00000-0xf8ffffff]
[    0.303461] pci_bus 0000:04: resource 3 mem: [0x0-0x0]
[    0.303463] pci_bus 0000:03: resource 0 io:  [0xd000-0xdfff]
[    0.303466] pci_bus 0000:03: resource 1 mem: [0xfea00000-0xfeafffff]
[    0.303469] pci_bus 0000:03: resource 2 mem: [0x0-0x0]
[    0.303471] pci_bus 0000:03: resource 3 mem: [0x0-0x0]
[    0.303474] pci_bus 0000:02: resource 0 io:  [0xc000-0xcfff]
[    0.303477] pci_bus 0000:02: resource 1 mem: [0xfe900000-0xfe9fffff]
[    0.303479] pci_bus 0000:02: resource 2 mem: [0x0-0x0]
[    0.303482] pci_bus 0000:02: resource 3 mem: [0x0-0x0]
[    0.303485] pci_bus 0000:05: resource 0 io:  [0xe000-0xefff]
[    0.303487] pci_bus 0000:05: resource 1 mem: [0xfeb00000-0xfebfffff]
[    0.303490] pci_bus 0000:05: resource 2 mem: [0x50000000-0x500fffff]
[    0.303493] pci_bus 0000:05: resource 3 io:  [0x00-0xffff]
[    0.303495] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.303556] NET: Registered protocol family 2
[    0.430129] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.430573] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[    0.431130] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.431438] TCP: Hash tables configured (established 131072 bind 65536)
[    0.431484] TCP reno registered
[    0.470140] NET: Registered protocol family 1
[    0.470303] checking if image is initramfs... it is
[    0.591375] Freeing initrd memory: 180715k freed
[    0.652531] audit: initializing netlink socket (disabled)
[    0.652600] type=2000 audit(1234944718.102:1): initialized
[    0.657201] VFS: Disk quotas dquot_6.5.2
[    0.657298] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.657405] msgmni has been set to 2400
[    0.657649] alg: No test for stdrng (krng)
[    0.657713] io scheduler noop registered
[    0.657756] io scheduler anticipatory registered
[    0.657800] io scheduler deadline registered (default)
[    0.657860] io scheduler cfq registered
[    0.658120] pci 0000:01:00.0: Boot video device
[    0.658318] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    0.658607] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.658926] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[    0.659245] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[    0.660031] xenbus_probe_backend_init bus registered ok
[    0.660132] xenbus_probe_frontend_init bus registered ok
[    0.660246] Event-channel device installed.
[    0.660289] ***blkif_init
[    0.662335] *** netif_init
[    0.663052] registering netback
[    0.704357] Linux agpgart interface v0.103
[    0.706558] brd: module loaded
[    0.706747] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    0.706848] ahci 0000:00:1f.2: version 3.0
[    0.706866] xen: registering gsi 22 triggering 0 polarity 1
[    0.706878] xen: --> irq=22
[    0.706881] xen_set_ioapic_routing: irq 22 gsi 22 vector 176 ioapic 0 pin 22 triggering 0 polarity 1
[    0.706943] ahci 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    0.707070] ahci: SSS flag set, parallel bus scan disabled
[    0.707143] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    0.707199] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems
[    0.707259] ahci 0000:00:1f.2: setting latency timer to 64
[    0.707796] scsi0 : ahci
[    0.708037] scsi1 : ahci
[    0.708243] scsi2 : ahci
[    0.708450] scsi3 : ahci
[    0.708651] scsi4 : ahci
[    0.708855] scsi5 : ahci
[    0.709221] ata1: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffe900 irq 22
[    0.709277] ata2: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffe980 irq 22
[    0.709332] ata3: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffea00 irq 22
[    0.709387] ata4: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffea80 irq 22
[    0.709442] ata5: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffeb00 irq 22
[    0.709497] ata6: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffeb80 irq 22
[    1.230023] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.230663] ata1.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133
[    1.230718] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    1.231469] ata1.00: configured for UDMA/133
[    1.250137] scsi 0:0:0:0: Direct-Access     ATA      ST3250410AS      3.AA PQ: 0 ANSI: 5
[    1.780022] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.780605] ata2.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133
[    1.780656] ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    1.781394] ata2.00: configured for UDMA/133
[    1.800124] scsi 1:0:0:0: Direct-Access     ATA      ST3250410AS      3.AA PQ: 0 ANSI: 5
[    2.150024] ata3: SATA link down (SStatus 0 SControl 300)
[    2.520024] ata4: SATA link down (SStatus 0 SControl 300)
[    2.890023] ata5: SATA link down (SStatus 0 SControl 300)
[    3.260024] ata6: SATA link down (SStatus 0 SControl 300)
[    3.280060] xen: registering gsi 16 triggering 0 polarity 1
[    3.280065] xen_allocate_pirq: returning irq 16 for gsi 16
[    3.280121] xen: --> irq=16
[    3.280124] xen_set_ioapic_routing: irq 16 gsi 16 vector 160 ioapic 0 pin 16 triggering 0 polarity 1
[    3.280182] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.300047] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    3.300116] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[    3.300168] ahci 0000:03:00.0: setting latency timer to 64
[    3.300367] scsi6 : ahci
[    3.300570] scsi7 : ahci
[    3.300800] ata7: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
[    3.300858] ata8: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
[    3.650035] ata7: SATA link down (SStatus 0 SControl 300)
[    4.020035] ata8: SATA link down (SStatus 0 SControl 300)
[    4.040229] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[    4.040278] xen: registering gsi 17 triggering 0 polarity 1
[    4.040281] xen_allocate_pirq: returning irq 17 for gsi 17
[    4.040325] xen: --> irq=17
[    4.040328] xen_set_ioapic_routing: irq 17 gsi 17 vector 168 ioapic 0 pin 17 triggering 0 polarity 1
[    4.040386] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    4.040474] pata_jmicron 0000:03:00.1: setting latency timer to 64
[    4.040566] scsi8 : pata_jmicron
[    4.040762] scsi9 : pata_jmicron
[    4.041930] ata9: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[    4.041977] ata10: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[    4.220579] ata9.00: ATAPI: Optiarc DVD RW AD-5200A, 1.03, max UDMA/66
[    4.260585] ata9.00: configured for UDMA/66
[    4.264258] scsi 8:0:0:0: CD-ROM            Optiarc  DVD RW AD-5200A  1.03 PQ: 0 ANSI: 5
[    4.432021] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    4.432067] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    4.432634] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.460188] mice: PS/2 mouse device common for all mice
[    4.460321] rtc_cmos 00:03: RTC can wake from S4
[    4.460452] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    4.460521] rtc0: alarms up to one month, y3k, 114 bytes nvram
[    4.460619] cpuidle: using governor ladder
[    4.461165] TCP cubic registered
[    4.461259] Bridge firewalling registered
[    4.461327] IO APIC resources could be not be allocated.
[    4.461589] registered taskstats version 1
[    4.461771]   Magic number: 13:788:169
[    4.461837] tty ttyq9: hash matches
[    4.461956] rtc_cmos 00:03: setting system clock to 2009-02-18 08:12:01 UTC (1234944721)
[    4.462012] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    4.462056] EDD information not available.
[    4.462144] Freeing unused kernel memory: 456k freed
[    4.462331] Write protecting the kernel read-only data: 4720k
[    4.479329] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    4.568075] fuse init (API version 7.11)
[    4.597089] device-mapper: uevent: version 1.0.3
[    4.597306] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
[    4.852752] usbcore: registered new interface driver usbfs
[    4.852823] usbcore: registered new interface driver hub
[    4.852911] usbcore: registered new device driver usb
[    4.855391] uhci_hcd: USB Universal Host Controller Interface driver
[    4.855478] xen: registering gsi 16 triggering 0 polarity 1
[    4.855482] xen_allocate_pirq: returning irq 16 for gsi 16
[    4.855527] xen: --> irq=16
[    4.855530] xen_set_ioapic_routing: irq 16 gsi 16 vector 160 ioapic 0 pin 16 triggering 0 polarity 1
[    4.855591] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.855647] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    4.855652] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    4.855741] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    4.855828] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[    4.856050] usb usb1: configuration #1 chosen from 1 choice
[    4.856127] hub 1-0:1.0: USB hub found
[    4.856186] hub 1-0:1.0: 2 ports detected
[    4.856374] xen: registering gsi 21 triggering 0 polarity 1
[    4.856384] xen: --> irq=21
[    4.856387] xen_set_ioapic_routing: irq 21 gsi 21 vector 184 ioapic 0 pin 21 triggering 0 polarity 1
[    4.856452] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    4.856509] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    4.856514] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    4.856583] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    4.856682] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[    4.856843] usb usb2: configuration #1 chosen from 1 choice
[    4.856918] hub 2-0:1.0: USB hub found
[    4.856977] hub 2-0:1.0: 2 ports detected
[    4.857147] xen: registering gsi 18 triggering 0 polarity 1
[    4.857153] xen: --> irq=18
[    4.857156] xen_set_ioapic_routing: irq 18 gsi 18 vector 192 ioapic 0 pin 18 triggering 0 polarity 1
[    4.857216] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    4.857268] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    4.857273] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    4.857342] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[    4.857436] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00
[    4.857610] usb usb3: configuration #1 chosen from 1 choice
[    4.857700] hub 3-0:1.0: USB hub found
[    4.857755] hub 3-0:1.0: 2 ports detected
[    4.857915] xen: registering gsi 23 triggering 0 polarity 1
[    4.857921] xen: --> irq=23
[    4.857924] xen_set_ioapic_routing: irq 23 gsi 23 vector 200 ioapic 0 pin 23 triggering 0 polarity 1
[    4.857984] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    4.858036] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    4.858041] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    4.858116] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    4.858209] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[    4.858370] usb usb4: configuration #1 chosen from 1 choice
[    4.858447] hub 4-0:1.0: USB hub found
[    4.858502] hub 4-0:1.0: 2 ports detected
[    4.858671] xen: registering gsi 19 triggering 0 polarity 1
[    4.858678] xen: --> irq=19
[    4.858681] xen_set_ioapic_routing: irq 19 gsi 19 vector 208 ioapic 0 pin 19 triggering 0 polarity 1
[    4.858741] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    4.858793] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    4.858798] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    4.858868] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[    4.858963] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[    4.859122] usb usb5: configuration #1 chosen from 1 choice
[    4.859203] hub 5-0:1.0: USB hub found
[    4.859259] hub 5-0:1.0: 2 ports detected
[    4.859421] xen: registering gsi 18 triggering 0 polarity 1
[    4.859424] xen_allocate_pirq: returning irq 18 for gsi 18
[    4.859470] xen: --> irq=18
[    4.859473] xen_set_ioapic_routing: irq 18 gsi 18 vector 192 ioapic 0 pin 18 triggering 0 polarity 1
[    4.859533] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    4.859585] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    4.859590] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    4.859662] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[    4.859753] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[    4.859915] usb usb6: configuration #1 chosen from 1 choice
[    4.859989] hub 6-0:1.0: USB hub found
[    4.860053] hub 6-0:1.0: 2 ports detected
[    4.876220] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.876270] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    4.876359] xen: registering gsi 18 triggering 0 polarity 1
[    4.876362] xen_allocate_pirq: returning irq 18 for gsi 18
[    4.876413] xen: --> irq=18
[    4.876416] xen_set_ioapic_routing: irq 18 gsi 18 vector 192 ioapic 0 pin 18 triggering 0 polarity 1
[    4.876482] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    4.876665] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    4.876672] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    4.876751] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
[    4.880722] ehci_hcd 0000:00:1a.7: debug port 1
[    4.880772] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    4.880781] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
[    4.900032] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    4.900214] usb usb7: configuration #1 chosen from 1 choice
[    4.900291] hub 7-0:1.0: USB hub found
[    4.900349] hub 7-0:1.0: 6 ports detected
[    4.900535] xen: registering gsi 23 triggering 0 polarity 1
[    4.900538] xen_allocate_pirq: returning irq 23 for gsi 23
[    4.900582] xen: --> irq=23
[    4.900585] xen_set_ioapic_routing: irq 23 gsi 23 vector 200 ioapic 0 pin 23 triggering 0 polarity 1
[    4.900645] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    4.900705] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    4.900710] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    4.900779] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[    4.904768] ehci_hcd 0000:00:1d.7: debug port 1
[    4.904818] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    4.904827] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
[    4.910275] sky2 driver version 1.22
[    4.910352] xen: registering gsi 17 triggering 0 polarity 1
[    4.910355] xen_allocate_pirq: returning irq 17 for gsi 17
[    4.910399] xen: --> irq=17
[    4.910402] xen_set_ioapic_routing: irq 17 gsi 17 vector 168 ioapic 0 pin 17 triggering 0 polarity 1
[    4.910461] sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    4.910515] sky2 0000:02:00.0: setting latency timer to 64
[    4.910550] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 3
[    4.920129] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    4.920303] usb usb8: configuration #1 chosen from 1 choice
[    4.920377] hub 8-0:1.0: USB hub found
[    4.920433] hub 8-0:1.0: 6 ports detected
[    4.942760] sky2 0000:02:00.0: Marvell Yukon 88E8056 Gigabit Ethernet Controller
[    4.942817]  Part Number: Yukon 88E8056
[    4.942819]  Engineering Level: Rev. 1.2
[    4.942822]  Manufacturer: Marvell
[    4.943199] sky2 eth0: addr 00:1e:8c:25:d9:23
[    4.955594] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    4.955659] xen: registering gsi 16 triggering 0 polarity 1
[    4.955663] xen_allocate_pirq: returning irq 16 for gsi 16
[    4.955707] xen: --> irq=16
[    4.955710] xen_set_ioapic_routing: irq 16 gsi 16 vector 160 ioapic 0 pin 16 triggering 0 polarity 1
[    4.955771] r8169 0000:05:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.955963] r8169 0000:05:04.0: no PCI Express capability
[    4.956408] eth1: RTL8169sc/8110sc at 0xffffc200000e4c00, 00:1e:8c:25:cc:a5, XID 18000000 IRQ 16
[    4.960175] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[    4.960265] scsi 1:0:0:0: Attached scsi generic sg1 type 0
[    4.960347] scsi 8:0:0:0: Attached scsi generic sg2 type 5
[    4.965806] xen: registering gsi 19 triggering 0 polarity 1
[    4.965810] xen_allocate_pirq: returning irq 19 for gsi 19
[    4.965856] xen: --> irq=19
[    4.965860] xen_set_ioapic_routing: irq 19 gsi 19 vector 208 ioapic 0 pin 19 triggering 0 polarity 1
[    4.965922] ohci1394 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    4.991633] Driver 'sd' needs updating - please use bus_type methods
[    4.991791] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[    4.991869] sd 0:0:0:0: [sda] Write Protect is off
[    4.991913] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.991956] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.992091] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[    4.992167] sd 0:0:0:0: [sda] Write Protect is off
[    4.992211] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.992254] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.992313]  sda: sda1 sda2 sda3 sda4 < >
[    5.007892] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.008027] sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[    5.008108] sd 1:0:0:0: [sdb] Write Protect is off
[    5.008153] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    5.008199] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.008338] sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[    5.008420] sd 1:0:0:0: [sdb] Write Protect is off
[    5.008465] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    5.008508] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.008566]  sdb:<6>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[febff000-febff7ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
[    5.028960]  sdb1 sdb2 sdb3 sdb4 <<4>Driver 'sr' needs updating - please use bus_type methods
[    5.044430]  sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 sdb14 sdb15 >
[    5.187052] sd 1:0:0:0: [sdb] Attached SCSI disk
[    5.193941] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    5.193989] Uniform CD-ROM driver Revision: 3.20
[    5.194111] sr 8:0:0:0: Attached scsi CD-ROM sr0
[    5.220034] usb 7-3: new high speed USB device using ehci_hcd and address 2
[    5.376870] usb 7-3: configuration #1 chosen from 1 choice
[    5.820033] usb 6-2: new low speed USB device using uhci_hcd and address 2
[    5.979016] usb 6-2: configuration #1 chosen from 1 choice
[    6.006148] usbcore: registered new interface driver hiddev
[    6.019117] input: HID 062a:0001 as /devices/pci0000:00/0000:00:1d.2/usb6/6-2/6-2:1.0/input/input2
[    6.060160] generic-usb 0003:062A:0001.0001: input,hidraw0: USB HID v1.10 Mouse [HID 062a:0001] on usb-0000:00:1d.2-2/input0
[    6.060237] usbcore: registered new interface driver usbhid
[    6.060283] usbhid: v2.6:USB HID core driver
[    6.350244] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001e8c00000473b7]
[    6.683385] kjournald starting.  Commit interval 5 seconds
[    6.683452] EXT3-fs: mounted filesystem with ordered data mode.
[   11.752532] udevd version 124 started
[   12.170088] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   12.189795] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.217098] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   12.260065] ACPI: Power Button (FF) [PWRF]
[   12.260235] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[   12.300040] ACPI: Power Button (CM) [PWRB]
[   12.628940] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[   12.629118] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   12.640260] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   13.095211] iTCO_vendor_support: vendor-support=0
[   13.119598] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04
[   13.119793] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
[   13.119945] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   13.260072] cfg80211: Using static regulatory domain info
[   13.260120] cfg80211: Regulatory domain: US
[   13.260164]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.260219]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[   13.260265]     (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[   13.260310]     (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[   13.260355]     (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[   13.260405]     (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[   13.260457]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[   13.260505] cfg80211: Calling CRDA for country: US
[   13.266928] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   16.645186] xen: registering gsi 22 triggering 0 polarity 1
[   16.645190] xen_allocate_pirq: returning irq 22 for gsi 22
[   16.645239] xen: --> irq=22
[   16.645242] xen_set_ioapic_routing: irq 22 gsi 22 vector 176 ioapic 0 pin 22 triggering 0 polarity 1
[   16.645304] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   16.645474] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   16.905229] wmaster0 (rtl8187): not using net_device_ops yet
[   16.905698] phy0: Selected rate control algorithm 'minstrel'
[   17.107139] wlan0 (rtl8187): not using net_device_ops yet
[   17.107649] phy0: hwaddr 00:15:af:51:c2:c0, RTL8187vB (default) V1 + rtl8225z2
[   17.107731] usbcore: registered new interface driver rtl8187
[   18.644384] loop: module loaded
[   18.717672] lp: driver loaded but no devices found
[   19.029583] Adding 3903752k swap on /dev/sdb15.  Priority:-1 extents:1 across:3903752k
[   19.403523] EXT3 FS on sdb14, internal journal
[   20.148367] ip_tables: (C) 2000-2006 Netfilter Core Team
[   20.221005] sky2 eth0: enabling interface
[   21.428620] NET: Registered protocol family 17
[   23.353823] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[   47.205794] NET: Registered protocol family 10
[   47.206607] lo: Disabled Privacy Extensions
[   49.022286] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[   49.279089] ppdev: user-space parallel port driver
[   51.187028] Bluetooth: Core ver 2.14
[   51.187142] NET: Registered protocol family 31
[   51.187145] Bluetooth: HCI device and connection manager initialized
[   51.187149] Bluetooth: HCI socket layer initialized
[   51.213920] Bluetooth: L2CAP ver 2.11
[   51.213923] Bluetooth: L2CAP socket layer initialized
[   51.235026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   51.235030] Bluetooth: BNEP filters: protocol multicast
[   51.249163] Bluetooth: SCO (Voice Link) ver 0.6
[   51.249166] Bluetooth: SCO socket layer initialized
[   51.483048] Bluetooth: RFCOMM socket layer initialized
[   51.483059] Bluetooth: RFCOMM TTY layer initialized
[   51.483062] Bluetooth: RFCOMM ver 1.10
[   54.520047] sky2 eth0: disabling interface
[   54.579408] sky2 peth0: enabling interface
[   54.579571] ADDRCONF(NETDEV_UP): peth0: link is not ready
[   55.580709] r8169: eth1: link down
[   55.580801] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   56.574609] sky2 peth0: Link is up at 100 Mbps, full duplex, flow control both
[   57.821561] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   57.850202] ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready
[   58.905686] device peth0 entered promiscuous mode
[   58.916838] eth0: topology change detected, propagating
[   58.916842] eth0: port 1(peth0) entering forwarding state
[   68.450012] peth0: no IPv6 routers present
[   69.290011] eth0: no IPv6 routers present
[   71.011634] xenbus_probe wake_waiting
[   71.011694] xenbus_probe wake_waiting
[   71.017997] xenbus_probe_devices backend
[   71.018139] xenbus_probe_devices failed xenbus_directory
[   71.018184] backend_probe_and_watch devices probed ok
[   71.018329] backend_probe_and_watch watch add ok ok
[   71.018374] backend_probe_and_watch all done
[   71.018419] xenbus_probe_devices device
[   71.018557] xenbus_probe_devices failed xenbus_directory
[   71.018604] frontend_probe_and_watch devices probed ok
[   71.018751] frontend_probe_and_watch watch add ok ok
[   71.018796] frontend_probe_and_watch all done

--- On Wed, 2/18/09, Boris Derzhavets <bderzhavets@xxxxxxxxx> wrote:

From: Boris Derzhavets <bderzhavets@xxxxxxxxx>
Subject: Re: [Xen-devel] xend start error
To: "Jeremy Fitzhardinge" <jeremy@xxxxxxxx>
Cc: jonr@xxxxxxxxxx, xen-devel@xxxxxxxxxxxxxxxxxxx
Date: Wednesday, February 18, 2009, 3:01 AM

I am working on it right now.
Boris.

--- On Wed, 2/18/09, Jeremy Fitzhardinge <jeremy@xxxxxxxx> wrote:

From: Jeremy Fitzhardinge <jeremy@xxxxxxxx>
Subject: Re: [Xen-devel] xend start error
To: bderzhavets@xxxxxxxxx
Cc: xen-devel@xxxxxxxxxxxxxxxxxxx, jonr@xxxxxxxxxx
Date: Wednesday, February 18, 2009, 3:00 AM

Boris Derzhavets wrote:
> Ok, Jeremy , i am on misleading way , but second person succeeded
> follow same instructions. Jon definitely has compiled kernel and was able
> to load it under Xen Unstable, if he tried command:-
>
> # /etc/init.d/xend  start
>
> You are developing new git repos , we can just guess and try
>

Good, I'm glad you've been
 having success.  Did you try that patch to 
see if it addresses the oops you got on (one of?) your boots?

Thanks,
   
 J

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel