Re: [Xen-devel] Unhandled invalid opcode fault/trap

[Jeremy Fitzhardinge <jeremy@xxxxxxxx>]

John Morrison wrote:
> Hi,
>
> Trying to get pv_ops working with 2.6.28.4, this is what I get on an 
> Intel Xeon CPU.
> Works fine on AMD Opteron...
>
> (XEN) Xen trace buffers: disabled
> (XEN) Std. Loglevel: Errors and warnings
> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
> (XEN) Xen is relinquishing VGA console.
> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch 
> input to Xen)
> (XEN) Freed 104kB init memory.
> (XEN) mm.c:1482:d1 Bad L1 flags 800000
> (XEN) traps.c:437:d1 Unhandled invalid opcode fault/trap [#6] on VCPU 
> 0 [ec=0000]
> (XEN) domain_crash_sync called from entry.S
> (XEN) Domain 1 (vcpu#0) crashed on cpu#7:
> (XEN) ----[ Xen-3.3.1  x86_64  debug=n  Not tainted ]----
> (XEN) CPU:    7
> (XEN) RIP:    e033:[<ffffffff8020aa1a>]
> (XEN) RFLAGS: 0000000000000282   EM: 1   CONTEXT: pv guest
> (XEN) rax: 00000000ffffffea   rbx: 8000000000000161   rcx: 
> 00000000007ff000
> (XEN) rdx: 0000000000000000   rsi: 80000008053e2061   rdi: 
> ffffffff804f0000
> (XEN) rbp: ffffffff8048ffa8   rsp: ffffffff8048ff58   r8:  
> 0000000000000000
> (XEN) r9:  0000000000000000   r10: 0000000000000000   r11: 
> 0000000000000000
> (XEN) r12: ffffffff804f0000   r13: 0000000000001000   r14: 
> 0000000000000008
> (XEN) r15: 0000000000000008   cr0: 000000008005003b   cr4: 
> 00000000000026b0
> (XEN) cr3: 000000080517e000   cr2: 0000000000000000
> (XEN) ds: 0000   es: 0000   fs: 0000   gs: 0000   ss: e02b   cs: e033
> (XEN) Guest stack trace from rsp=ffffffff8048ff58:
> (XEN)    00000000007ff000 0000000000000000 ffffffff8020aa1a 
> 000000010000e030
> (XEN)    0000000000010082 ffffffff8048ff98 000000000000e02b 
> ffffffff8020aa16
> (XEN)    0000000000000200 0000000000000040 ffffffff8048fff8 
> ffffffff804b51c5
> (XEN)    ffffffff80754000 0000080000000000 0000000000040000 
> 0000000000000000
> (XEN)    0000000000000000 0000000000000000 0000000000000000 
> 0000000000000000
> (XEN)    0000000000000000
>
> Any ideas ?
Do you have NX disabled in your BIOS (or is it a very early x86-64 intel 
chip)?
What does:

$ gdb vmlinux
(gdb) x/i 0xffffffff8020aa1a

say?

   J

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel