Bootdata ok (command line is single root=/dev/mapper/space-data_lv_root2 ro BOOT console=tty0 dom0_mem=256M pciback.hide=(00:02.0)(00:02.1)(00:06.0)(01:07.0)(01:08.0)(01:09.0) noirqdebug nousb xencons=off)
Linux version 2.6.18-xen-3.3-1-amd64 (Debian 2.6.18.dfsg.1-23+xen.2) (waldi@xxxxxxxxxx) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23+1)) #1 SMP Sun Nov 23 13:15:10 CET 2008
BIOS-provided physical RAM map:
 Xen: 0000000000000000 - 00000000f33dd000 (usable)
DMI 2.4 present.
On node 0 totalpages: 982696
  DMA zone: 4040 pages, LIFO batch:0
  DMA32 zone: 978656 pages, LIFO batch:31
ACPI: RSDP (v000 GBT                                   ) @ 0x00000000000f6510
ACPI: RSDT (v001 GBT    NVDAACPI 0x42302e31 NVDA 0x01010101) @ 0x00000000bfef3000
ACPI: FADT (v001 GBT    NVDAACPI 0x42302e31 NVDA 0x01010101) @ 0x00000000bfef3040
ACPI: SSDT (v001 PTLTD  POWERNOW 0x00000001  LTP 0x00000001) @ 0x00000000bfef7880
ACPI: HPET (v001 GBT    NVDAACPI 0x42302e31 NVDA 0x00000098) @ 0x00000000bfef7ac0
ACPI: MCFG (v001 GBT    NVDAACPI 0x42302e31 NVDA 0x01010101) @ 0x00000000bfef7b00
ACPI: MADT (v001 GBT    NVDAACPI 0x42302e31 NVDA 0x01010101) @ 0x00000000bfef77c0
ACPI: DSDT (v001 GBT    NVDAACPI 0x00001000 MSFT 0x0100000c) @ 0x0000000000000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
Setting APIC routing to xen
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c0000000 (gap: bff00000:32100000)
Built 1 zonelists.  Total pages: 982696
Kernel command line: single root=/dev/mapper/space-data_lv_root2 ro BOOT console=tty0 dom0_mem=256M pciback.hide=(00:02.0)(00:02.1)(00:06.0)(01:07.0)(01:08.0)(01:09.0) noirqdebug nousb xencons=off
IRQ lockup detection disabled
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Xen reported: 2109.588 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Software IO TLB enabled: 
 Aperture:     64 megabytes
 Kernel range: ffff8800061a7000 - ffff88000a1a7000
 Address size: 27 bits
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Memory: 3813724k/3985268k available (2017k kernel code, 162664k reserved, 897k data, 152k init)
Calibrating delay using timer specific routine.. 4220.60 BogoMIPS (lpj=8441212)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
SMP alternatives: switching to SMP code
Brought up 2 CPUs
Initializing CPU#1
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
migration_cost=223
checking if image is initramfs... it is
Freeing initrd memory: 16002k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Cannot map mmconfig aperture for segment 0
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:06.0
PCI: Transparent bridge - 0000:00:08.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: ACPI device : hid PNP0A08
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0103
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0800
pnp: ACPI device : hid PNP0C04
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0303
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C01
pnp: PnP ACPI: found 12 devices
xen_mem: Initialising balloon driver.
usbcore: USB support disabled
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:01' and the driver 'system'
pnp: 00:01: ioport range 0x1000-0x107f could not be reserved
pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
pnp: 00:01: ioport range 0x1400-0x147f has been reserved
pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved
pnp: 00:01: ioport range 0x1800-0x187f has been reserved
pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
pnp: match found with the PnP device '00:02' and the driver 'system'
pnp: match found with the PnP device '00:0a' and the driver 'system'
pnp: match found with the PnP device '00:0b' and the driver 'system'
pciback 0000:00:02.0: seizing device
pciback 0000:00:02.1: seizing device
pciback 0000:00:06.0: seizing device
pciback 0000:01:07.0: seizing device
pciback 0000:01:08.0: seizing device
pciback 0000:01:09.0: seizing device
PCI: Bridge: 0000:00:08.0
  IO window: 9000-9fff
  MEM window: f4000000-f6ffffff
  PREFETCH window: f7000000-f7ffffff
PCI: Bridge: 0000:00:0c.0
  IO window: a000-afff
  MEM window: f8000000-f9ffffff
  PREFETCH window: c0000000-c00fffff
PCI: Bridge: 0000:00:0e.0
  IO window: b000-bfff
  MEM window: fa000000-fbffffff
  PREFETCH window: c0100000-c01fffff
PCI: Setting latency timer of device 0000:00:08.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1231182357.964:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:0c.0 to 64
pcie_portdrv_probe->Dev[045a:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
pcie_portdrv_probe->Dev[0459:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Event-channel device installed.
netfront: Initialising virtual ethernet driver.
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
GSI 16 sharing vector 0xA8 and IRQ 16
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 16
ACPI: PCI interrupt for device 0000:01:09.0 disabled
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
GSI 17 sharing vector 0xB0 and IRQ 17
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 17
ACPI: PCI interrupt for device 0000:01:08.0 disabled
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
GSI 18 sharing vector 0xB8 and IRQ 18
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 18
ACPI: PCI interrupt for device 0000:01:07.0 disabled
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
GSI 19 sharing vector 0xC0 and IRQ 19
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 19
ACPI: PCI interrupt for device 0000:00:06.0 disabled
ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22
GSI 20 sharing vector 0xC8 and IRQ 20
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [AUB2] -> GSI 22 (level, low) -> IRQ 20
ACPI: PCI interrupt for device 0000:00:02.1 disabled
ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 21
GSI 21 sharing vector 0xD0 and IRQ 21
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [AUBA] -> GSI 21 (level, low) -> IRQ 21
ACPI: PCI interrupt for device 0000:00:02.0 disabled
pnp: the driver 'i8042 kbd' has been registered
pnp: match found with the PnP device '00:09' and the driver 'i8042 kbd'
pnp: the driver 'i8042 aux' has been registered
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 152k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI Exception (acpi_processor-0707): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI Exception (acpi_processor-0707): AE_NOT_FOUND, Processor Device is not present [20060707]
SCSI subsystem initialized
libata version 2.00 loaded.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-MCP65: IDE controller at PCI slot 0000:00:09.0
NFORCE-MCP65: chipset revision 161
NFORCE-MCP65: not 100% native mode: will probe irqs later
NFORCE-MCP65: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE-MCP65: 0000:00:09.0 (rev a1) UDMA133 controller
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: ST3500830A, ATA DISK drive
hdb: JLMS XJ-HD165H, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ahci 0000:00:0a.0: version 2.0
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
GSI 22 sharing vector 0xD8 and IRQ 22
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:0a.0 to 64
ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:0a.0: flags: 64bit ncq pm led clo pmp pio 
ata1: SATA max UDMA/133 cmd 0xFFFFC20000004100 ctl 0x0 bmdma 0x0 irq 253
ata2: SATA max UDMA/133 cmd 0xFFFFC20000004180 ctl 0x0 bmdma 0x0 irq 253
ata3: SATA max UDMA/133 cmd 0xFFFFC20000004200 ctl 0x0 bmdma 0x0 irq 253
ata4: SATA max UDMA/133 cmd 0xFFFFC20000004280 ctl 0x0 bmdma 0x0 irq 253
scsi0 : ahci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 31/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : ahci
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 31/32)
ata2.00: ata2: dev 0 multi count 16
ata2.00: configured for UDMA/133
scsi2 : ahci
ata3: SATA link down (SStatus 0 SControl 300)
scsi3 : ahci
ata4: SATA link down (SStatus 0 SControl 300)
  Vendor: ATA       Model: ST3500830AS       Rev: 3.AA
  Type:   Direct-Access                      ANSI SCSI revision: 05
  Vendor: ATA       Model: ST3500830AS       Rev: 3.AA
  Type:   Direct-Access                      ANSI SCSI revision: 05
hda: max request size: 512KiB
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
 sdb: sdb1 sdb2 sdb3
sd 1:0:0:0: Attached scsi disk sdb
hda: Host Protected Area detected.
	current capacity is 976771055 sectors (500106 MB)
	native  capacity is 976773168 sectors (500107 MB)
hda: Host Protected Area disabled.
hda: 976773168 sectors (500107 MB) w/8192KiB Cache, CHS=60801/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1
hdb: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Probing IDE interface ide1...
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
md: raid1 personality registered for level 1
md: md1 stopped.
md: bind<sdb2>
md: bind<sda2>
raid1: raid set md1 active with 2 out of 2 mirrors
md: md0 stopped.
md: bind<sdb1>
md: bind<sda1>
raid1: raid set md0 active with 2 out of 2 mirrors
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@xxxxxxxxxx
Attempting manual resume
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
ts: Compaq touchscreen protocol output
input: PC Speaker as /class/input/input1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:08' and the driver 'serial'
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
EXT3 FS on dm-23, internal journal
loop: loaded (max 64 devices)
kjournald starting.  Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-27, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1048568k swap on /dev/mapper/space-data_lv_swap.  Priority:-1 extents:1 across:1048568k
Bridge firewalling registered
device wlan entered promiscuous mode
audit(1231182375.169:2): dev=wlan prom=256 old_prom=0 auid=4294967295
device dmz entered promiscuous mode
audit(1231182375.249:3): dev=dmz prom=256 old_prom=0 auid=4294967295
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
[drm] Initialized drm 1.0.1 20051102
suspend: event channel 15
dmz: no IPv6 routers present
extern: no IPv6 routers present
wlan: no IPv6 routers present
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on dm-22, internal journal
EXT3-fs: mounted filesystem with ordered data mode.