WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-devel

Re: [Xen-devel] Re: pv_ops dom0 USB fixed

On Thu, 2008-12-11 at 14:47 -0500, Todd Deshane wrote:
> On Thu, Dec 11, 2008 at 1:17 PM, Jeremy Fitzhardinge <jeremy@xxxxxxxx> wrote:
> > Todd Deshane wrote:
> >>>
> >>> Well, for a start, disable MSI for now (pci=nomsi on the kernel command
> >>> line).  I haven't done any MSI support yet.
> >>>
> >>> In the nosmp boot, something seems amiss with interrupt routing.  nomsi
> >>> may
> >>> help there as well, but I'll need to have a closer look at the code to
> >>> work
> >>> out what's really going wrong here.  Hm, its probably:
> >>> [    0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option.
> >>>
> >>> I guess nosmp implies noapic?  Anyway, we don't do well without ioapics
> >>> at
> >>> present...
> >>>
> >>>  J
> >>>
> >>>
> >>
> >> The pci=nomsi helped a lot.
> >>
> >> I have booting (at least almost)
> >>
> >> Again two logs attached. This time the without nosmp does better.
> >>
> >> Gets to a checking battery state line then it seems to stop.
> >>
> >
> > What normally happens next?  Looks like its pretty close to the end of the
> > boot sequence; is that where it would normally print the login prompt?  Is
> > the machine on the network at that point?  Can you log in remotely?
> >
> 
> Correct it is fully booted. This is the same thing shown on a normal
> linux boot. I have attached both logs for reference. The linux one
> is not exactly the same kernel, but it is close (both are rc7)
> The vanilla linux one doesn't have any xen dom0 patches.
> 
> On the normal linux one, even when putting the console on
> the serial port, gdm loads up on the monitor, but this
> doesn't happen for the dom0 kernel.
> 
> However I can SSH into the dom0 kernel fine.

Do you have a getty running on hvc0?

> /proc/xen/capabilities is missing, so xend does not start.

/proc/xen is now a filesystem mount point, make sure you have
CONFIG_XENFS and CONFIG_XEN_COMPAT_XENFS and add to /etc/fstab:

none            /proc/xen       xenfs   defaults        0       0

Ian.



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel