Hi, Bhanskar.
Could you try my patch?
My MegaRAID SAS card works well with this patch.
If you are using ioemu, please try c/s 18430.
http://xenbits.xensource.com/xen-unstable.hg?rev/1a785d213573
If you are using ioemu-romote, please try c/s 4761.
http://xenbits.xensource.com/ext/qemu-xen-unstable.hg?rev/5f415e92f4e5
Thanks,
--
Yuji Shimada
On Tue, 30 Sep 2008 20:54:04 +0800
"Jayaraman, Bhaskar" <Bhaskar.Jayaraman@xxxxxxx> wrote:
> Hi the patch works and we are able to insert the module in the kernel.
> Subsequently we’re dedicating the MgaRAID SAS card to an HVM guest as well
> but once that is done we’re unable to see the volumes i.e. the disk is not
> showing up through fdisk -l in the HVM guest. The error received on the dmesg
> of HVM is that the firmware doesn’t initialize: -
>
> megasas: 00.00.03.01 Sun May 14 22:49:52 PDT 2006
> megasas: 0x1000:0x0411:0x1000:0x1008: bus 0:slot 6:func 0
> PCI: Enabling device 0000:00:06.0 (0080 -> 0082)
> ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 40 (level, low) -> IRQ 169
> megasas: Waiting for FW to come to ready state
> megasas: Failed to init firmware
> ACPI: PCI interrupt for device 0000:00:06.0 disabled
>
> This Megasas card however worked fine on an HVM on a dell dq35 machine. Does
> anyone face the same issue?
> Bhaskar.
> ________________________________
> From: Han, Weidong [mailto:weidong.han@xxxxxxxxx]
> Sent: Thursday, September 18, 2008 12:02 PM
> To: Kumar, Venkat
> Cc: Cui, Dexuan; xen-devel@xxxxxxxxxxxxxxxxxxx; espen.skoglund@xxxxxxxxxxxxx
> Subject: RE: Megaraid SAS driver failing in Xen-3.3.0 but was working in
> Xen-3.2.2-rc3
>
> per this log, we can see the context mapping is not created for 02:0e.0.
>
> I checked the code, I suspect context mapping() for PCI device is incorrect
> (see case DEV_TYPE_PCI block code in domain_context_mapping()). Obviously the
> PCI device is not mapped. Espen changed this code in c/s 17972. Espen, can
> you give some explanation?
>
> Venkat, pls try attached patch. and pls post your "lspci -v" output.
>
> Randy (Weidong)
>
> ________________________________
> From: Kumar, Venkat [mailto:Venkat.Kumar@xxxxxxx]
> Sent: 2008年9月18日 12:45
> To: Han, Weidong
> Cc: Cui, Dexuan; xen-devel@xxxxxxxxxxxxxxxxxxx
> Subject: RE: Megaraid SAS driver failing in Xen-3.3.0 but was working in
> Xen-3.2.2-rc3
>
> Hi Randy,
>
> I am attaching the complete output in a file.
>
> But for your reference, a part of it I am pasting in the body.
> ==================================================================================
> (XEN) PCI add device 02:0e.0
> (XEN) [VT-D]iommu.c:775: iommu_page_fault: iommu->reg = ffff828bfff55000
> (XEN) [VT-D]iommu.c:744: iommu_fault_status: Fault Overflow
> (XEN) [VT-D]iommu.c:729: iommu_fault:DMA Write: 2:e.0 addr cddf2000 REASON 2
> iommu->reg = ffff828bfff55000
> (XEN) print_vtd_entries: iommu = ffff8300cde0db00 bdf = 2:e:0 gmfn = cddf2
> (XEN) root_entry = ffff83012bfe5000
> (XEN) root_entry[2] = 12779e001
> (XEN) context = ffff83012779e000
> (XEN) context[70] = 0_0
> (XEN) ctxt_entry[70] not present
> (XEN) PCI add device 00:1b.0
> (XEN) PCI remove device 02:0e.0
> ==================================================================================
>
> 02:0e.0 is the pci id of Megaraid SAS controller.
> For some reason you can see that the device is removed.
> I guess this output would give you some idea.
>
>
> Thx,
> Venkat
> ________________________________
> From: Han, Weidong [mailto:weidong.han@xxxxxxxxx]
> Sent: Thursday, September 18, 2008 8:01 AM
> To: Kumar, Venkat; xen-devel@xxxxxxxxxxxxxxxxxxx
> Cc: Cui, Dexuan
> Subject: RE: Megaraid SAS driver failing in Xen-3.3.0 but was working in
> Xen-3.2.2-rc3
>
> Venkat,
>
> Can you post the serial console output?
>
> Randy (Weidong)
>
> ________________________________
> From: Kumar, Venkat [mailto:Venkat.Kumar@xxxxxxx]
> Sent: 2008年9月17日 20:38
> To: xen-devel@xxxxxxxxxxxxxxxxxxx
> Cc: Han, Weidong; Cui, Dexuan
> Subject: Megaraid SAS driver failing in Xen-3.3.0 but was working in
> Xen-3.2.2-rc3
> On Xen-3.3.0, domain0 Megaraid SAS (SAS 1068 controller) driver is not
> loading correctly if vtd support in Xen is enabled.
> It fails at the point of initializing firmware.
>
> I wasn’t seeing this error with Xen-3.2.2-rc3 (Unstable version), though with
> vtd disabled in Xen-3.3.0, it is working.
>
> Looks like a degrade problem.
>
> Any clues?
> Thx,
> Venkat
>
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home