| |
|
 |
|
 |
|
|
|
| |
|
|
xen-devel
Re: [Xen-devel] [XSM] Setting of ACM Policy
Suzaki,
Kuniyasu Suzaki wrote:
# xm setpolicy ACM DEFAULT-UL
Successfully set the new policy.
Supported security subsystems : ACM
Policy name : DEFAULT-UL
Policy type : ACM
Version of XML policy : 1.0
Policy configuration : loaded, activated for boot
# xm list --label
Name ID Mem VCPUs State Time(s)
Label
Domain-0 0 1887 2 r----- 226.7
ACM:DEFAULT-UL:SystemManagement
# xm resetpolicy
Successfully reset the system's policy.
=============================================================
By the way I cannot make the "DEFAULT-UL.bin" file.
Can't I set the .bin file at GRUB Menu?
It look like you already have DEFAULT-UL.bin file. Check /boot.
You can manually set it in grub.conf as below:
module /DEFAULT-UL.bin
Cheers,
Dilshan
------
suzaki
>>From: Dilshan Jayarathna <dilshan.jayarathna@xxxxxxxxx>
>>Subject: Re: [Xen-devel] [XSM] Setting of ACM Policy
>>
>>Hi Suzaki,
>>
>>It looks like a faulty build. (I could be wrong)
>>If you've set ACM_SECURITY ?= y in Config.mk when you building xen, you
>>must get ACM as the supported security subsystem when you run 'xm
>>getpolicy'.
>>
>>If you just run 'xm setpolicy', you should get error but it also tells
>>you the supported policy type
>>(...The only policytype that is currently supported is 'ACM'...)
>>
>>You can use xensec_ezpolicy to create a policy in xml format. Then 'xm
>>setpolicy...' to covert xml to binary format and to activate the policy.
>>
>>But if the XSM is not build properly, none of the above will work.
>>
>>Hope this helps.
>>
>>Cheers,
>>Dilshan
>>
>>Kuniyasu Suzaki wrote:
>>> Hello,
>>>
>>> Please tell me how to setup ACM of XSM.
>>> I could build a XSM but it doesn't work well.
>>> # xm getpolicy
>>> Supported security subsystems: None
>>>
>>> I guess it is caused by the lack of a policy file.
>>> I referred the following manual and tried to create poly file.
>>> http://www.cl.cam.ac.uk/research/srg/netos/xen/readmes/user.pdf
>>>
>>> The manual tells that the following command create a policy file
>>> "mytest.bin".
>>> # xm setpolicy ACM mytest
>>>
>>> However the command doesn't work well. Please tell me create a policy file.
>>> I tried on Xen 3.2.1. Is the step obsolete?
>>>
>>> ------
>>> suzaki
>>>
>>> _______________________________________________
>>> Xen-devel mailing list
>>> Xen-devel@xxxxxxxxxxxxxxxxxxx
>>> http://lists.xensource.com/xen-devel
>>>
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
|
|
| |
|
Home