Hello,
I was wondering about the not so good performances of the IDE emulation
even in the case of DMA transfers. It happens that qemu is actually
limiting the qemu / dom0 kernel reads/writes to 8KB at a time, which is
not very big (the SCSI emulation uses 64KB). Increasing it provides a
very good improvement, as the attached graph shows. On my test machine,
55MB/s can be achieved with a buffer of 128KB, to be compared to the
native 65MB/s. The stubdomain approach is limited to 44KB because of
the limit in the PV blk interface.
Samuel
ioemu: improve DMA transfers
by increasing the size of DMA buffers.
Signed-off-by: Samuel Thibault <samuel.thibault@xxxxxxxxxxxxx>
diff -r dc1fe3bd1393 tools/ioemu/hw/ide.c
--- a/tools/ioemu/hw/ide.c Thu Mar 20 10:53:10 2008 +0000
+++ b/tools/ioemu/hw/ide.c Thu Mar 20 16:11:03 2008 +0000
@@ -189,6 +189,15 @@
/* set to 1 set disable mult support */
#define MAX_MULT_SECTORS 16
+#ifdef CONFIG_STUBDOM
+#include <xen/io/blkif.h>
+#define IDE_DMA_BUF_SIZE (BLKIF_MAX_SEGMENTS_PER_REQUEST * TARGET_PAGE_SIZE)
+#else
+#define IDE_DMA_BUF_SIZE 131072
+#endif
+#if (IDE_DMA_BUF_SIZE < MAX_MULT_SECTORS * 512)
+#error "IDE_DMA_BUF_SIZE must be bigger or equal to MAX_MULT_SECTORS * 512"
+#endif
/* ATAPI defines */
@@ -932,8 +941,8 @@
/* launch next transfer */
n = s->nsector;
- if (n > MAX_MULT_SECTORS)
- n = MAX_MULT_SECTORS;
+ if (n > IDE_DMA_BUF_SIZE)
+ n = IDE_DMA_BUF_SIZE;
s->io_buffer_index = 0;
s->io_buffer_size = n * 512;
#ifdef DEBUG_AIO
@@ -1041,8 +1050,8 @@
/* launch next transfer */
n = s->nsector;
- if (n > MAX_MULT_SECTORS)
- n = MAX_MULT_SECTORS;
+ if (n > IDE_DMA_BUF_SIZE)
+ n = IDE_DMA_BUF_SIZE;
s->io_buffer_index = 0;
s->io_buffer_size = n * 512;
@@ -1336,8 +1345,8 @@
data_offset = 16;
} else {
n = s->packet_transfer_size >> 11;
- if (n > (MAX_MULT_SECTORS / 4))
- n = (MAX_MULT_SECTORS / 4);
+ if (n > (IDE_DMA_BUF_SIZE / 4))
+ n = (IDE_DMA_BUF_SIZE / 4);
s->io_buffer_size = n * 2048;
data_offset = 0;
}
@@ -2306,7 +2315,7 @@
for(i = 0; i < 2; i++) {
s = ide_state + i;
- s->io_buffer = qemu_memalign(getpagesize(), MAX_MULT_SECTORS*512 + 4);
+ s->io_buffer = qemu_memalign(getpagesize(), IDE_DMA_BUF_SIZE*512 + 4);
if (i == 0)
s->bs = hd0;
else
--- a/tools/ioemu/hw/scsi-disk.c Thu Mar 20 10:53:10 2008 +0000
+++ b/tools/ioemu/hw/scsi-disk.c Thu Mar 20 16:11:03 2008 +0000
@@ -34,9 +34,10 @@
#define SENSE_ILLEGAL_REQUEST 5
#ifdef CONFIG_STUBDOM
-#define SCSI_DMA_BUF_SIZE 32768
+#include <xen/io/blkif.h>
+#define SCSI_DMA_BUF_SIZE (BLKIF_MAX_SEGMENTS_PER_REQUEST *
TARGET_PAGE_SIZE)
#else
-#define SCSI_DMA_BUF_SIZE 65536
+#define SCSI_DMA_BUF_SIZE 131072
#endif
typedef struct SCSIRequest {
hda-perfs.eps
Description: PostScript document
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home