Here's a snip from the serial of the kernel booting using native 2.6.18 with
the only change being that i updated the 3ware drivers.
Note; that this kernel was patched with the 2.6.18 3ware driver, not the
2.6.19 and newer... If you want to see this kernel patched with the 2.6.19
driver i can do that...
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
Loading jbd.ko musb 1-1: USB disconnect, address 2
odule
Loading ext3.ko module
Loading scsi_mod.ko module
SCSI subsystem initialized
Loading sd_mod.ko module
Loadin3ware 9000 Storage Controller device driver for Linux
v2.26.06.002-2.6.18.
g 3w-9xxx.ko modACPI: PCI Interrupt 0000:06:00.0[A] -> ule
GSI 16 (level, low) -> IRQ 169
scsi0 : 3ware 9000 Storage Controller
3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xda300000, IRQ:
169.
3w-9xxx: scsi0: Firmware FE9X 3.08.02.005, BIOS BE9X 3.08.00.002, Ports: 4.
Vendor: AMCC Model: 9650SE-4LP DISK Rev: 3.08
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 1953083392 512-byte hdwr sectors (999979 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back, no read (daft)
SCSI device sda: 1953083392 512-byte hdwr sectors (999979 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back, no read (daft)
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
Loading dm-mod.ko module
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised:
dm-devel@xxxxxxxxxx
Loading dm-mirror.ko module
Loading dm-zero.ko module
Loading dm-snapshot.ko module
Waiting for driver initialization.
usb 1-1: new low speed USB device using uhci_hcd and address 3
usb 1-1: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
usb-0000:00:1d.0-1
usb 1-2: new low speed USB device using uhci_hcd and address 4
usb 1-2: configuration #1 chosen from 1 choice
input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input2
input: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on
usb-0000:00:1d.0-2
input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input3
input: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on
usb-0000:00:1d.0-2
Making device-mapper control node
Scanning logical volumes
Reading all physical volumes. This may take a while...
Found volume group "VolGroup00" using metadata type lvm2
Found volume group "VolGroup01" using metadata type lvm2
Activating logical volumes
3 logical volume(s) in volume group "VolGroup00" now active
Trying to resume from /dev/VolGroup00/LogVol01
No suspend signature on swap, not resuming.
Creating root device.
Mounting root filesystem.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Setting up other filesystems.
Setting up new root fs
no fstab.sys, mounting internal defaults
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1189571960.209:2): selinux=0 auid=4294967295
INIT: version 2.86 booting
Welcome to CentOS release 5 (Final)
Press 'I' to enter interactive startup.
Setting clock (utc): Tue Sep 11 21:39:22 PDT 2007 [ OK ]
Starting udev: [ OK ]
Loading default keymap (us): [ OK ]
Setting hostname devhost1.localdomain: [ OK ]
Setting up Logical Volume Management: 3 logical volume(s) in volume group
"VolGroup00" now active
1 logical volume(s) in volume group "VolGroup01" now active
[ OK ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/VolGroup00/LogVol00
/dev/VolGroup00/LogVol00: clean, 292291/23035904 files, 2127377/23035904
blocks
[/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1
/boot: clean, 46/255232 files, 18123/255024 blocks
[/sbin/fsck.ext3 (1) -- /data] fsck.ext3 -a /dev/VolGroup01/LogVol00
/dev/VolGroup01/LogVol00: clean, 11/51216384 files, 1651821/51191808 blocks
[/sbin/fsck.ext3 (1) -- /tmp] fsck.ext3 -a /dev/VolGroup00/LogVol02
/dev/VolGroup00/LogVol02: clean, 12/1532576 files, 83797/1531904 blocks
[ OK ]
Remounting root filesystem in read-write mode: [ OK ]
Mounting local filesystems: [ OK ]
Enabling /etc/fstab swaps: [ OK ]
INIT: Entering runlevel: 3
Entering non-interactive startup
Starting sysstat: Calling the system activity data collector (sadc):
[ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: [ OK ]
Starting system logger: [ OK ]
Starting kernel logger: [ OK ]
Mounting other filesystems: [ OK ]
Starting sshd: [ OK ]
Starting console mouse services: [ OK ]
Starting crond: [ OK ]
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
| 
Home