> --- a/arch/i386/kernel/entry.S
> +++ b/arch/i386/kernel/entry.S
> @@ -1001,6 +1001,83 @@ ENTRY(kernel_thread_helper)
> CFI_ENDPROC
> ENDPROC(kernel_thread_helper)
>
> +#ifdef CONFIG_XEN
> +/* Xen only supports sysenter/sysexit in ring0 guests,
> + and only if it the guest asks for it. So for now,
> + this should never be used. */
> +ENTRY(xen_sti_sysexit)
> + CFI_STARTPROC
> + ud2
> + CFI_ENDPROC
Please add ENDPROC()s too, otherwise Jan will be unhappy.
Could be written in C with a real BUG?
> +ENTRY(xen_failsafe_callback)
> + CFI_STARTPROC
> + pushl %eax
> + CFI_ADJUST_CFA_OFFSET 4
> + movl $1,%eax
> +1: mov 4(%esp),%ds
> +2: mov 8(%esp),%es
> +3: mov 12(%esp),%fs
> +4: mov 16(%esp),%gs
> + testl %eax,%eax
> + popl %eax
> + CFI_ADJUST_CFA_OFFSET -4
> + jz 5f
> + addl $16,%esp # EAX != 0 => Category 2 (Bad IRET)
> + CFI_ADJUST_CFA_OFFSET -16
> + jmp iret_exc
> +5: addl $16,%esp # EAX == 0 => Category 1 (Bad segment)
If you use lea you could move the two adds before the jz
> +#ifdef CONFIG_XEN
> +#include "../xen/xen-head.S"
> +#endif
Can this really not be linked separately?
> +
> /*
> * Real beginning of normal "text" segment
> */
> @@ -528,7 +532,7 @@ ENTRY(_stext)
> /*
> * BSS section
> */
> -.section ".bss.page_aligned","w"
> +.section ".bss.page_aligned"
Why?
> -static fastcall void native_clts(void)
> +fastcall void native_clts(void)
Fastcalls should all go now
> --- a/arch/i386/kernel/vmlinux.lds.S
> +++ b/arch/i386/kernel/vmlinux.lds.S
> @@ -93,6 +93,7 @@ SECTIONS
>
> . = ALIGN(4096);
> .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
> + *(.data.page_aligned)
Weird that that didn't work before -- we already had page aligned data
and it somehow managed to work. But ok.
> *(.data.idt)
> }
>
> ===================================================================
> --- a/arch/i386/mm/pgtable.c
> +++ b/arch/i386/mm/pgtable.c
> @@ -267,6 +267,7 @@ static void pgd_ctor(pgd_t *pgd)
> swapper_pg_dir + USER_PTRS_PER_PGD,
> KERNEL_PGD_PTRS);
> } else {
> + memset(pgd, 0, USER_PTRS_PER_PGD*sizeof(pgd_t));
That looks strange here. Belongs in a different patch?
> +
> +extern struct Xgt_desc_struct cpu_gdt_descr;
> +extern struct i386_pda boot_pda;
> +extern unsigned long init_pg_tables_end;
No externs in .c files
> +
> +static DEFINE_PER_CPU(unsigned, lazy_mode);
> +
> +/* Code defined in entry.S (not a function) */
> +extern const char xen_sti_sysexit[];
Ok except that
> +{
> + printk(KERN_INFO "Booting paravirtualized kernel on %s\n",
> + paravirt_ops.name);
Say something about Xen here?
> +}
> +
> +static fastcall void xen_restore_fl(unsigned long flags)
> +{
> + struct vcpu_info *vcpu;
> +
> + preempt_disable();
> +
> + /* convert from IF type flag */
> + flags = !(flags & X86_EFLAGS_IF);
> + vcpu = read_pda(xen.vcpu);
> + vcpu->evtchn_upcall_mask = flags;
> + if (flags == 0) {
> + barrier(); /* unmask then check (avoid races) */
If the barrier is needed shouldn't it be a rmb() ?
> + vcpu = read_pda(xen.vcpu);
> + vcpu->evtchn_upcall_mask = 0;
> + barrier(); /* unmask then check (avoid races) */
Similar.
> +static fastcall void xen_load_gdt(const struct Xgt_desc_struct *dtr)
> +{
> + unsigned long va;
> + int f;
> + unsigned size = dtr->size + 1;
> + unsigned long frames[16];
> +
> + BUG_ON(size > 16*PAGE_SIZE);
> +
Indentation broken
(more occurences in this file)
> + type = (high >> 8) & 0x1f;
> + dpl = (high >> 13) & 3;
> +
> + if (type != 0xf && type != 0xe)
> + return 0;
> +
> + info->vector = vector;
> + info->address = (high & 0xffff0000) | (low & 0x0000ffff);
> + info->cs = low >> 16;
> + info->flags = dpl;
> + /* interrupt gates clear IF */
> + if (type == 0xe)
> + info->flags |= 4;
Nasty magic numbers?
> + return 1;
> +}
> +
> +#if 0
> +static void unpack_desc(u32 low, u32 high,
> + unsigned long *base, unsigned long *limit,
> + unsigned char *type, unsigned char *flags)
> +{
> + *base = (high & 0xff000000) | ((high << 16) & 0x00ff0000) | ((low >>
> 16) & 0xffff);
> + *limit = (high & 0x000f0000) | (low & 0xffff);
> + *type = (high >> 8) & 0xff;
> + *flags = (high >> 20) & 0xf;
> +}
> +#endif
Remove?
> +
> +/* Locations of each CPU's IDT */
> +static DEFINE_PER_CPU(struct Xgt_desc_struct, idt_desc);
Why is that private here?
> + /* Switch to new pagetable. This is done before
> + pagetable_init has done anything so that the new pages
> + added to the table can be prepared properly for Xen. */
> + printk("about to switch to new pagetable %p...\n", base);
> + xen_write_cr3(__pa(base));
> + printk("done\n");
KERN_* ?
> + if (HYPERVISOR_update_descriptor(virt_to_machine(cpu_gdt_table +
> + GDT_ENTRY_PDA).maddr,
> + (u64)high << 32 | low))
> + BUG();
Does a BUG that early actually do anything good?
> +
> +/*
> + * Accessors for packed IRQ information.
> + */
Wouldn't it be a little simpler to just use a bit field?
> +static void bind_evtchn_to_cpu(unsigned int chn, unsigned int cpu)
> +{
> + int irq = evtchn_to_irq[chn];
> +
> + BUG_ON(irq == -1);
> + set_native_irq_info(irq, cpumask_of_cpu(cpu));
> +
> + __clear_bit(chn, (unsigned long *)cpu_evtchn_mask[cpu_evtchn[chn]]);
Why is the mask not unsigned long in the first place ?
> + level is a bitset of pending events themselves.
> +*/
> +asmlinkage fastcall void xen_evtchn_do_upcall(struct pt_regs *regs)
> +{
> + int cpu = smp_processor_id();
Doesn't a preemptive kernel complain about this?
> + set_64bit((u64 *)ptep, pte_val_ma(pte));
> +}
> +
> +void fastcall xen_pte_clear(struct mm_struct *mm, u32 addr,pte_t *ptep)
> +{
> +#if 1
> + ptep->pte_low = 0;
> + smp_wmb();
> + ptep->pte_high = 0;
> +#else
> + set_64bit((u64 *)ptep, 0);
Eliminate #if please
> +fastcall unsigned long long xen_pgd_val(pgd_t pgd)
> +{
> + unsigned long long ret = pgd.pgd;
> + if (ret)
> + ret = machine_to_phys(XMADDR(ret)).paddr | 1;
Why can they be 0 here anyways?
Normally they are all considered undefined when not present
> + rdtscll(now);
> + delta = now - shadow->tsc_timestamp;
> + return scale_delta(delta, shadow->tsc_to_nsec_mul, shadow->tsc_shift);
> +}
> +
> +
> +static void xen_timer_interrupt_hook(void)
Timer code ... hopefully dyntick will not all mess this up. It is scheduled
to go into mainline RSN. You might have to do some more merging.
> +
> +char * __init xen_memory_setup(void);
Prototypes don't need __init
> +void __init xen_arch_setup(void);
> +void __init xen_init_IRQ(void);
> +
> @@ -53,6 +54,7 @@ struct paravirt_ops
> void (*arch_setup)(void);
> char *(*memory_setup)(void);
> void (*init_IRQ)(void);
> + void (*init_pda)(struct i386_pda *, int cpu);
Hmm weird. For what was that needed again?
-AndI
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home