Daniel P. Berrange wrote:
> Section "InputDevice"
> Identifier "XenInput0"
> Driver "evdev"
> Option "CorePointer"
> Option "SendCoreEvents"
> Option "Device" "/dev/input/event0"
> Option "XkbModel" "pc105"
> Option "XkbLayout" "us"
> EndSection
That doesn't work with older Xorg (aka evdev driver) versions ...
I've attached a newer version of the patch, also my xorg.conf config
file (for Xorg 7.2+). It is possible to match capability bits in the
config file. Using this it is easy to make Xorg use evdev for pointing
devices which deliver absolute coordinates.
cheers,
Gerd
--
Gerd Hoffmann <kraxel@xxxxxxx>
pvfb: Split mouse and keyboard into separate devices.
This patch creates two separate input devices for keyboard and mouse
events. The reason for this is to separate them in the linux input
layer and allow them being routed different ways.
Use case: Configure the X-Server like this to get the mouse
events directly from the linux input layer, which has the major
advantage that absolute coordinates work correctly:
Section "InputDevice"
Driver "evdev"
Identifier "Mouse[1]"
Option "Device" "/dev/input/event<nr>"
EndSection
This makes the keyboard stop working though in case mouse and
keyboard events are coming through the same input device.
Signed-off-by: Gerd Hoffmann <kraxel@xxxxxxx>
Cc: Markus Armbruster <armbru@xxxxxxxxxx>
---
linux-2.6-xen-sparse/drivers/xen/fbfront/xenkbd.c | 80 ++++++++++++++--------
1 file changed, 54 insertions(+), 26 deletions(-)
Index: build-32-unstable-13800/linux-2.6-xen-sparse/drivers/xen/fbfront/xenkbd.c
===================================================================
---
build-32-unstable-13800.orig/linux-2.6-xen-sparse/drivers/xen/fbfront/xenkbd.c
+++ build-32-unstable-13800/linux-2.6-xen-sparse/drivers/xen/fbfront/xenkbd.c
@@ -29,10 +29,12 @@
struct xenkbd_info
{
- struct input_dev *dev;
+ struct input_dev *kbd;
+ struct input_dev *ptr;
struct xenkbd_page *page;
int irq;
struct xenbus_device *xbdev;
+ char phys[32];
};
static int xenkbd_remove(struct xenbus_device *);
@@ -56,23 +58,27 @@ static irqreturn_t input_handler(int rq,
rmb(); /* ensure we see ring contents up to prod */
for (cons = page->in_cons; cons != prod; cons++) {
union xenkbd_in_event *event;
+ struct input_dev *dev;
event = &XENKBD_IN_RING_REF(page, cons);
+ dev = info->ptr;
switch (event->type) {
case XENKBD_TYPE_MOTION:
- input_report_rel(info->dev, REL_X, event->motion.rel_x);
- input_report_rel(info->dev, REL_Y, event->motion.rel_y);
+ input_report_rel(dev, REL_X, event->motion.rel_x);
+ input_report_rel(dev, REL_Y, event->motion.rel_y);
break;
case XENKBD_TYPE_KEY:
- input_report_key(info->dev, event->key.keycode,
event->key.pressed);
+ if (test_bit(event->key.keycode, info->kbd->keybit))
+ dev = info->kbd;
+ input_report_key(dev, event->key.keycode,
event->key.pressed);
break;
case XENKBD_TYPE_POS:
- input_report_abs(info->dev, ABS_X, event->pos.abs_x);
- input_report_abs(info->dev, ABS_Y, event->pos.abs_y);
+ input_report_abs(dev, ABS_X, event->pos.abs_x);
+ input_report_abs(dev, ABS_Y, event->pos.abs_y);
break;
}
+ input_sync(dev);
}
- input_sync(info->dev);
mb(); /* ensure we got ring contents */
page->in_cons = cons;
notify_remote_via_irq(info->irq);
@@ -85,7 +91,7 @@ int __devinit xenkbd_probe(struct xenbus
{
int ret, i;
struct xenkbd_info *info;
- struct input_dev *input_dev;
+ struct input_dev *kbd, *ptr;
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info) {
@@ -94,6 +100,7 @@ int __devinit xenkbd_probe(struct xenbus
}
dev->dev.driver_data = info;
info->xbdev = dev;
+ snprintf(info->phys, sizeof(info->phys), "xenbus/%s", dev->nodename);
info->page = (void *)__get_free_page(GFP_KERNEL);
if (!info->page)
@@ -101,32 +108,52 @@ int __devinit xenkbd_probe(struct xenbus
info->page->in_cons = info->page->in_prod = 0;
info->page->out_cons = info->page->out_prod = 0;
- input_dev = input_allocate_device();
- if (!input_dev)
+ /* keyboard */
+ kbd = input_allocate_device();
+ if (!kbd)
goto error_nomem;
-
- input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_ABS);
- input_dev->keybit[LONG(BTN_MOUSE)]
- = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
- /* TODO additional buttons */
- input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
-
+ kbd->name = "Xen Virtual Keyboard";
+ kbd->phys = info->phys;
+ kbd->id.bustype = BUS_PCI;
+ kbd->id.vendor = 0x5853;
+ kbd->id.product = 0x2;
+ kbd->evbit[0] = BIT(EV_KEY);
/* FIXME not sure this is quite right */
for (i = 0; i < 256; i++)
- set_bit(i, input_dev->keybit);
+ set_bit(i, kbd->keybit);
- input_dev->name = "Xen Virtual Keyboard/Mouse";
+ ret = input_register_device(kbd);
+ if (ret) {
+ input_free_device(kbd);
+ xenbus_dev_fatal(dev, ret, "input_register_device(kbd)");
+ goto error;
+ }
+ info->kbd = kbd;
- input_set_abs_params(input_dev, ABS_X, 0, XENFB_WIDTH, 0, 0);
- input_set_abs_params(input_dev, ABS_Y, 0, XENFB_HEIGHT, 0, 0);
+ /* pointing device */
+ ptr = input_allocate_device();
+ if (!ptr)
+ goto error_nomem;
+ ptr->name = "Xen Virtual Pointer";
+ ptr->phys = info->phys;
+ ptr->id.bustype = BUS_PCI;
+ ptr->id.vendor = 0x5853;
+ ptr->id.product = 0x3;
+ ptr->evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_ABS);
+ ptr->keybit[LONG(BTN_MOUSE)]
+ = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
+ /* TODO additional buttons */
+ ptr->relbit[0] = BIT(REL_X) | BIT(REL_Y);
+ input_set_abs_params(ptr, ABS_X, 0, XENFB_WIDTH, 0, 0);
+ input_set_abs_params(ptr, ABS_Y, 0, XENFB_HEIGHT, 0, 0);
- ret = input_register_device(input_dev);
+ ret = input_register_device(ptr);
if (ret) {
- input_free_device(input_dev);
- xenbus_dev_fatal(dev, ret, "input_register_device");
+ input_free_device(ptr);
+ xenbus_dev_fatal(dev, ret, "input_register_device(ptr)");
goto error;
}
- info->dev = input_dev;
+ info->ptr = ptr;
ret = xenkbd_connect_backend(dev, info);
if (ret < 0)
@@ -155,7 +182,8 @@ static int xenkbd_remove(struct xenbus_d
struct xenkbd_info *info = dev->dev.driver_data;
xenkbd_disconnect_backend(info);
- input_unregister_device(info->dev);
+ input_unregister_device(info->kbd);
+ input_unregister_device(info->ptr);
free_page((unsigned long)info->page);
kfree(info);
return 0;
# xorg 7.2+ config file, fbdev
# default keyboard
Section "InputDevice"
Driver "kbd"
Identifier "Keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
# default mouse
Section "InputDevice"
Driver "mouse"
Identifier "Mouse"
Option "Device" "/dev/input/mice"
EndSection
# pointing device sending absolute x/y coordinates,
# works much better with evdev driver.
Section "InputDevice"
Driver "evdev"
Identifier "AbsPtr"
Option "SendCoreEvents" "true"
Option "evBits" "+1 +3" # ev_key, ev_abs
Option "keyBits" "~256-287" # btn_*
Option "absBits" "+0 +1" # abs_x, abs_y
EndSection
Section "Screen"
Device "fbdev"
Identifier "fbdev"
EndSection
Section "Device"
Driver "fbdev"
Identifier "fbdev"
EndSection
Section "ServerLayout"
Identifier "default"
Screen "fbdev"
InputDevice "Keyboard" "CoreKeyboard"
InputDevice "Mouse" "CorePointer"
InputDevice "AbsPtr"
EndSection
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home