Re: [Xen-devel] [PATCH] fix free of event channel in blkfront

[tgh <tianguanhua@xxxxxxxxxx>]

Thank you for your detail reply
Now I boot the VM with the conf file
...
disk = [ 'file:/vm/dom3.img,sda1,w' ]
...
and then commit the commands as follows

[root@genode012 vmcserver]# xm block-attach dom3 
file:/vm1/template/tp1.img sda2 w
[root@genode012 vmcserver]# xm block-list dom3
Vdev BE handle state evt-ch ring-ref BE-path
2049 0 0 4 6 8 /local/domain/0/backend/vbd/107/2049
2050 0 0 4 8 534 /local/domain/0/backend/vbd/107/2050
[root@genode012 vmcserver]# xm console dom3

[root@office2 ~]# cat /proc/diskstats
1 0 ram0 0 0 0 0 0 0 0 0 0 0 0
1 1 ram1 0 0 0 0 0 0 0 0 0 0 0
1 2 ram2 0 0 0 0 0 0 0 0 0 0 0
1 3 ram3 0 0 0 0 0 0 0 0 0 0 0
1 4 ram4 0 0 0 0 0 0 0 0 0 0 0
1 5 ram5 0 0 0 0 0 0 0 0 0 0 0
1 6 ram6 0 0 0 0 0 0 0 0 0 0 0
1 7 ram7 0 0 0 0 0 0 0 0 0 0 0
1 8 ram8 0 0 0 0 0 0 0 0 0 0 0
1 9 ram9 0 0 0 0 0 0 0 0 0 0 0
1 10 ram10 0 0 0 0 0 0 0 0 0 0 0
1 11 ram11 0 0 0 0 0 0 0 0 0 0 0
1 12 ram12 0 0 0 0 0 0 0 0 0 0 0
1 13 ram13 0 0 0 0 0 0 0 0 0 0 0
1 14 ram14 0 0 0 0 0 0 0 0 0 0 0
1 15 ram15 0 0 0 0 0 0 0 0 0 0 0
8 1 sda1 1837 184 60546 3330 1034 1155 17512 16510 0 2290 19840
9 0 md0 0 0 0 0 0 0 0 0 0 0 0
8 2 sda2 0 0 0 0 0 0 0 0 0 0 0
[root@office2 ~]# df -h
Filesystem 瀹归噺 宸茬敤 鍙敤 宸茬敤% 鎸傝浇鐐?
/dev/sda1 5.8G 4.0G 1.5G 73% /
none 128M 0 128M 0% /dev/shm
[root@office2 ~]#

what do I do wrong? How should I make it ?
I am really confused with it







Kasai Takanori 写道:
> Hi,
>
>
> > I boot the VM with a img file and the conf file is as follows
> > ...
> > disk = [ 'file:/vm/dom3.img,sda1,w' ]
> >
> > and if I want to attach another img file to the VM ,then
> > the VM boot img must have many partitions such as sda ,sda1, sda2 when
> > the img file is made and
> > xm block-attach file:/vm1/template/another.img sda1 w
> > then in the VM ,mount the sda1,and access it
> > I am not for sure whether I understand your mean
> > or do you mean that the another img file with I want to attach to the VM
> > needs have many partitions?
> The boot image when starting has already been allocated to sda1.
> (BackDev: file:/vm/dom3.img)
> Therefore, it is not possible to attach to sda1 by block-attach command.
> Please do not overlap with FrontEnd device that has already been used.
>
> It is recognized as follows if there is a partition in the attached file.
> # xm block-attach file:/vm1/template/another.img sdb w
>
> another.img file (BackDev) | GuestOS(FrontDev)
> -------------------------------------------------------
> 3 partitions(1,2,3) | sdb, sdb1, sdb2, sdb3
> 1 partitions(1) | sdb, sdb1
> ※ 1 -> sdb1, 2 -> sdb2, 3->sdb3
>
> It is possible to recognized as follows if there is no partition in 
> attached file.
> # xm block-attach file:/vm1/template/another.img sdb1 w
>
> Best Regards,
>
> --
> Takanori Kasai
>
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel