|
|
|
|
|
|
|
|
|
|
xen-devel
[Xen-devel] [patch] ne2000.patch
This small could make ne2000 net card on HVM work stable.
I have submitted the patch to qemu mail list. Actually, they only check
the second part of it!
Several note:
1) Because ne2000.c in device model don't implement all the features
required by ne2000 hardware specs, I add some simple workaround to it!
When the buffer is full, resend the IRQ singal to the receiver! The
hardware asks us to send overflow IRQ to receiver, However, we needn't
do that since the software implementation will not overflow but just
miss the irq signal and halt itself!
2) According to the hardware spec, I have changed the condition when the
buffer is full.
Signed-off-by: hanzhu <zhu.han@xxxxxxxxx>
diff -r 6d476981e3a5 tools/ioemu/hw/ne2000.c
--- a/tools/ioemu/hw/ne2000.c Sun May 28 15:49:17 2006 +0100
+++ b/tools/ioemu/hw/ne2000.c Mon May 29 16:28:11 2006 +0800
@@ -147,9 +147,37 @@ static void ne2000_reset(NE2000State *s)
}
}
+static int ne2000_buffer_full(NE2000State *s)
+{
+ int avail, index, boundary;
+
+ index = s->curpag << 8;
+ boundary = s->boundary << 8;
+ if (index <= boundary)
+ /* when index == boundary, we should assume the
+ * buffer is full instead of empty!
+ */
+ avail = boundary - index;
+ else
+ avail = (s->stop - s->start) - (index - boundary);
+
+ if(avail < (MAX_ETH_FRAME_SIZE + 4))
+ return 1;
+
+ return 0;
+}
+
static void ne2000_update_irq(NE2000State *s)
{
int isr;
+
+
+ if(ne2000_buffer_full(s)){
+ /* The freeing space is not enough, tell the ne2k driver
+ * to fetch these packets!
+ */
+ s->isr |= ENISR_RX;
+ }
isr = s->isr & s->imr;
#if defined(DEBUG_NE2000)
printf("NE2000: Set IRQ line %d to %d (%02x %02x)\n",
@@ -172,14 +200,10 @@ static int ne2000_can_receive(void *opaq
if (s->cmd & E8390_STOP)
return 0;
- index = s->curpag << 8;
- boundary = s->boundary << 8;
- if (index < boundary)
- avail = boundary - index;
- else
- avail = (s->stop - s->start) - (index - boundary);
- if (avail < (MAX_ETH_FRAME_SIZE + 4))
+
+ if(ne2000_buffer_full(s)){
return 0;
+ }
return MAX_ETH_FRAME_SIZE;
}
Best Regards,
hanzhu
ne2000.patch
Description: ne2000.patch
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Xen-devel] [patch] ne2000.patch,
Han, Zhu <=
|
|
|
|
|