- change cli/sti
- change test for user mode return to work for kernel mode in ring1
- check hypervisor saved event mask on return from exception
- add entry points for the hypervisor upcall handlers
- avoid math emulation check when running on Xen
- add nmi handler for running on Xen
Signed-off-by: Ian Pratt <ian.pratt@xxxxxxxxxxxxx>
Signed-off-by: Christian Limpach <Christian.Limpach@xxxxxxxxxxxx>
Signed-off-by: Chris Wright <chrisw@xxxxxxxxxxxx>
---
arch/i386/kernel/entry.S | 137 +++++++++++++++++++++++++++++++++++++++++------
1 file changed, 120 insertions(+), 17 deletions(-)
--- linus-2.6.orig/arch/i386/kernel/entry.S
+++ linus-2.6/arch/i386/kernel/entry.S
@@ -75,8 +75,38 @@ DF_MASK = 0x00000400
NT_MASK = 0x00004000
VM_MASK = 0x00020000
+#ifndef CONFIG_XEN
+#define DISABLE_INTERRUPTS cli
+#define ENABLE_INTERRUPTS sti
+#else
+#include <xen/interface/xen.h>
+
+EVENT_MASK = 0x2E
+
+/* Offsets into shared_info_t. */
+#define evtchn_upcall_pending /* 0 */
+#define evtchn_upcall_mask 1
+
+#define sizeof_vcpu_shift 6
+
+#ifdef CONFIG_SMP
+#define GET_VCPU_INFO movl TI_cpu(%ebp),%esi ; \
+ shl $sizeof_vcpu_shift,%esi ; \
+ addl HYPERVISOR_shared_info,%esi
+#else
+#define GET_VCPU_INFO movl HYPERVISOR_shared_info,%esi
+#endif
+
+#define __DISABLE_INTERRUPTS movb $1,evtchn_upcall_mask(%esi)
+#define DISABLE_INTERRUPTS GET_VCPU_INFO ; \
+ __DISABLE_INTERRUPTS
+#define ENABLE_INTERRUPTS GET_VCPU_INFO ; \
+ movb $0,evtchn_upcall_mask(%esi)
+#define __TEST_PENDING testb $0xFF,evtchn_upcall_pending(%esi)
+#endif
+
#ifdef CONFIG_PREEMPT
-#define preempt_stop cli
+#define preempt_stop DISABLE_INTERRUPTS
#else
#define preempt_stop
#define resume_kernel restore_nocheck
@@ -145,10 +175,10 @@ ret_from_intr:
GET_THREAD_INFO(%ebp)
movl EFLAGS(%esp), %eax # mix EFLAGS and CS
movb CS(%esp), %al
- testl $(VM_MASK | 3), %eax
+ testl $(VM_MASK | USER_MODE_MASK), %eax
jz resume_kernel
ENTRY(resume_userspace)
- cli # make sure we don't miss an interrupt
+ DISABLE_INTERRUPTS # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
movl TI_flags(%ebp), %ecx
@@ -159,7 +189,7 @@ ENTRY(resume_userspace)
#ifdef CONFIG_PREEMPT
ENTRY(resume_kernel)
- cli
+ DISABLE_INTERRUPTS
cmpl $0,TI_preempt_count(%ebp) # non-zero preempt_count ?
jnz restore_nocheck
need_resched:
@@ -179,7 +209,7 @@ need_resched:
ENTRY(sysenter_entry)
movl TSS_sysenter_esp0(%esp),%esp
sysenter_past_esp:
- sti
+ ENABLE_INTERRUPTS
pushl $(__USER_DS)
pushl %ebp
pushfl
@@ -209,7 +239,7 @@ sysenter_past_esp:
jae syscall_badsys
call *sys_call_table(,%eax,4)
movl %eax,EAX(%esp)
- cli
+ DISABLE_INTERRUPTS
movl TI_flags(%ebp), %ecx
testw $_TIF_ALLWORK_MASK, %cx
jne syscall_exit_work
@@ -217,7 +247,7 @@ sysenter_past_esp:
movl EIP(%esp), %edx
movl OLDESP(%esp), %ecx
xorl %ebp,%ebp
- sti
+ ENABLE_INTERRUPTS
sysexit
@@ -240,7 +270,7 @@ syscall_call:
call *sys_call_table(,%eax,4)
movl %eax,EAX(%esp) # store the return value
syscall_exit:
- cli # make sure we don't miss an interrupt
+ DISABLE_INTERRUPTS # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
movl TI_flags(%ebp), %ecx
@@ -248,6 +278,7 @@ syscall_exit:
jne syscall_exit_work
restore_all:
+#ifndef CONFIG_XEN
movl EFLAGS(%esp), %eax # mix EFLAGS, SS and CS
# Warning: OLDSS(%esp) contains the wrong/random values if we
# are returning to the kernel.
@@ -258,12 +289,32 @@ restore_all:
cmpl $((4 << 8) | 3), %eax
je ldt_ss # returning to user-space with LDT SS
restore_nocheck:
+#else
+restore_nocheck:
+ movl EFLAGS(%esp), %eax # mix EFLAGS and CS
+ movb CS(%esp), %al
+ andl $(VM_MASK | 3), %eax
+ cmpl $3, %eax
+ jne hypervisor_iret
+ ENABLE_INTERRUPTS
+ __TEST_PENDING
+ jz restore_regs_and_iret
+ __DISABLE_INTERRUPTS
+ jmp do_hypervisor_callback
+hypervisor_iret:
+ RESTORE_REGS
+ addl $4, %esp
+ jmp hypercall_page + (__HYPERVISOR_iret * 32)
+#endif
+restore_regs_and_iret:
RESTORE_REGS
addl $4, %esp
1: iret
.section .fixup,"ax"
iret_exc:
- sti
+#ifndef CONFIG_XEN
+ ENABLE_INTERRUPTS
+#endif
pushl $0 # no error code
pushl $do_iret_error
jmp error_code
@@ -273,6 +324,7 @@ iret_exc:
.long 1b,iret_exc
.previous
+#ifndef CONFIG_XEN
ldt_ss:
larl OLDSS(%esp), %eax
jnz restore_nocheck
@@ -285,7 +337,7 @@ ldt_ss:
* CPUs, which we can try to work around to make
* dosemu and wine happy. */
subl $8, %esp # reserve space for switch16 pointer
- cli
+ DISABLE_INTERRUPTS
movl %esp, %eax
/* Set up the 16bit stack frame with switch32 pointer on top,
* and a switch16 pointer on top of the current frame. */
@@ -297,6 +349,7 @@ ldt_ss:
.align 4
.long 1b,iret_exc
.previous
+#endif
# perform work that needs to be done immediately before resumption
ALIGN
@@ -305,7 +358,7 @@ work_pending:
jz work_notifysig
work_resched:
call schedule
- cli # make sure we don't miss an interrupt
+ DISABLE_INTERRUPTS # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
movl TI_flags(%ebp), %ecx
@@ -357,7 +410,7 @@ syscall_trace_entry:
syscall_exit_work:
testb $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP), %cl
jz work_pending
- sti # could let do_syscall_trace() call
+ ENABLE_INTERRUPTS # could let do_syscall_trace() call
# schedule() instead
movl %esp, %eax
movl $1, %edx
@@ -377,6 +430,7 @@ syscall_badsys:
movl $-ENOSYS,EAX(%esp)
jmp resume_userspace
+#ifndef CONFIG_XEN
#define FIXUP_ESPFIX_STACK \
movl %esp, %eax; \
/* switch to 32bit stack using the pointer on top of 16bit stack */ \
@@ -435,6 +489,9 @@ ENTRY(name) \
/* The include is where all of the SMP etc. interrupts come from */
#include "entry_arch.h"
+#else
+#define UNWIND_ESPFIX_STACK
+#endif
ENTRY(divide_error)
pushl $0 # no error code
@@ -466,6 +523,44 @@ error_code:
call *%edi
jmp ret_from_exception
+#ifdef CONFIG_XEN
+ENTRY(hypervisor_callback)
+ pushl %eax
+ SAVE_ALL
+do_hypervisor_callback:
+ push %esp
+ call evtchn_do_upcall
+ add $4,%esp
+ jmp ret_from_intr
+
+# Hypervisor uses this for application faults while it executes.
+ENTRY(failsafe_callback)
+1: popl %ds
+2: popl %es
+3: popl %fs
+4: popl %gs
+ subl $4,%esp
+ SAVE_ALL
+ jmp ret_from_exception
+.section .fixup,"ax"; \
+6: movl $0,(%esp); \
+ jmp 1b; \
+7: movl $0,(%esp); \
+ jmp 2b; \
+8: movl $0,(%esp); \
+ jmp 3b; \
+9: movl $0,(%esp); \
+ jmp 4b; \
+.previous; \
+.section __ex_table,"a";\
+ .align 4; \
+ .long 1b,6b; \
+ .long 2b,7b; \
+ .long 3b,8b; \
+ .long 4b,9b; \
+.previous
+#endif
+
ENTRY(coprocessor_error)
pushl $0
pushl $do_coprocessor_error
@@ -479,17 +574,19 @@ ENTRY(simd_coprocessor_error)
ENTRY(device_not_available)
pushl $-1 # mark this as an int
SAVE_ALL
+#ifndef CONFIG_XEN
movl %cr0, %eax
testl $0x4, %eax # EM (math emulation bit)
- jne device_not_available_emulate
- preempt_stop
- call math_state_restore
- jmp ret_from_exception
-device_not_available_emulate:
+ je device_available_emulate
pushl $0 # temporary storage for ORIG_EIP
call math_emulate
addl $4, %esp
jmp ret_from_exception
+device_available_emulate:
+#endif
+ preempt_stop
+ call math_state_restore
+ jmp ret_from_exception
/*
* Debug traps and NMI can happen at the one SYSENTER instruction
@@ -525,6 +622,8 @@ debug_stack_correct:
call do_debug
jmp ret_from_exception
.previous .text
+
+#ifndef CONFIG_XEN
/*
* NMI is doubly nasty. It can happen _while_ we're handling
* a debug fault, and the debug fault hasn't yet been able to
@@ -595,6 +694,10 @@ nmi_16bit_stack:
.align 4
.long 1b,iret_exc
.previous
+#else
+ENTRY(nmi)
+ jmp restore_all
+#endif
KPROBE_ENTRY(int3)
pushl $-1 # mark this as an int
--
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home