Test Configuration:
Dell PowerEdge 430, Dual Core, 2GB, 3 SATA (Intel VT)
32bit XEN PAE Hypervisor on a RHEL4U2 32bit root (/dev/sda)
dom0_mem=256M (required to boot domUs)
32bit fully virtualized (HVM) guest RHEL4U2 256MB (/dev/sdb)
pae=0, acpi=1, apic=1
kernargs clock=pit
32bit fully virtualized (HVM) guest RHEL3U6 256MB (/dev/sdc)
pae=0, acpi=1, apic=1
kernargs clock=pit
Boot Tests:
Boot a fully virtualized (HVM) guest to the login prompt
Results are marked Pass|Fail where (n) points to a failure description
Regression Tests:
851 tests (850 ltp tests and one 30 minute user load test)
Tests are marked #Pass/#Fail where (n) points to a failure description
XEN 32bit PAE 1 CPU Hypervisor (booted nosmp):
----------------------------------------------------------------------
| XEN | Guest Kernel (SMP kernels booted with 1 CPU) |
| Changeset|-----------------------------------------------------------|
| | RHEL4 UP | RHEL4 SMP | RHEL3 UP | RHEL3 SMP |
| |--------------|--------------|--------------|--------------|
| | Boot | Test | Boot | Test | Boot | Test | Boot | Test |
|----------|------|-------|------|-------|------|-------|------|-------|
| 9913 | Fail | | Fail | | Fail | | Fail | |
| | (3) | | (3) | | (3) | | (3) | |
|----------|------|-------|------|-------|------|-------|------|-------|
| 9903 | Fail | | Fail | | Fail | | Fail | |
| | (3) | | (3) | | (3) | | (3) | |
|----------|------|-------|------|-------|------|-------|------|-------|
| 9896 | Pass | 850/1 | Fail | | Pass | | Fail | |
| | | (2) | (1) | | | | (1) | |
|----------|------|-------|------|-------|------|-------|------|-------|
| 9888 | Pass | 850/1 | Fail | | Pass | 850/1 | Fail | |
| | | (2) | (1) | | | (2) | (1) | |
|----------|------|-------|------|-------|------|-------|------|-------|
| | | | | | | | | |
| | | | | | | | | |
----------------------------------------------------------------------
XEN 32bit PAE 2 CPU Hypervisor (booted smp):
----------------------------------------------------------------------
| XEN | Guest Kernel (SMP kernels booted with 2 CPU) |
| Changeset|-----------------------------------------------------------|
| | RHEL4 UP | RHEL4 SMP | RHEL3 UP | RHEL3 SMP |
| |--------------|--------------|--------------|--------------|
| | Boot | Test | Boot | Test | Boot | Test | Boot | Test |
|----------|------|-------|------|-------|------|-------|------|-------|
| 9913 | Fail | | Fail | | Fail | | Fail | |
| | (3) | | (3) | | (3) | | (3) | |
|----------|------|-------|------|-------|------|-------|------|-------|
| 9903 | Fail | | Fail | | Fail | | Fail | |
| | (3) | | (3) | | (3) | | (3) | |
|----------|------|-------|------|-------|------|-------|------|-------|
| 9896 | Pass | | Fail | | Pass | | Fail | |
| | | | (1) | | | | (1) | |
|----------|------|-------|------|-------|------|-------|------|-------|
| 9888 | Pass | | Fail | | Pass | | Fail | |
| | | | (1) | | | | (1) | |
|----------|------|-------|------|-------|------|-------|------|-------|
| | | | | | | | | |
| | | | | | | | | |
----------------------------------------------------------------------
Failures:
1. 32 bit SMP guests hang on boot
"Uncompressing Linux... Ok, booting the kernel."
2. 32bit UP guest fail ltp gettimeofday02
"Time is going backwards"
3. [Fix checked in after automated build] Build broken:
cc1: warnings being treated as errors
mm.c: In function subarch_init_memory:
mm.c:163: warning: format %ld expects type long int,
but argument 2 has type unsigned int
mm.c:163: warning: format %ld expects type long int,
but argument 3 has type unsigned int
File: boot.3
[root@tst177 ~]# xm info
host : tst177.katana-technology.com
release : 2.6.16-xen
version : #1 SMP Wed Apr 26 01:42:49 EDT 2006
machine : x86_64
nr_cpus : 2
nr_nodes : 1
sockets_per_node : 1
cores_per_socket : 2
threads_per_core : 1
cpu_mhz : 2793
hw_caps :
bfebfbff:20100800:00000000:00000180:0000e43d:00000000:00000001
total_memory : 2047
free_memory : 131
xen_major : 3
xen_minor : 0
xen_extra : -unstable
xen_caps : xen-3.0-x86_64 hvm-3.0-x86_32 hvm-3.0-x86_32p
hvm-3.0-x86_64
platform_params : virt_start=0xffff800000000000
xen_changeset : Tue Apr 25 13:22:11 2006 +0100 9744:1ad06bd6832d
cc_compiler : gcc version 4.0.0 20050519 (Red Hat 4.0.0-8)
cc_compile_by : build
cc_compile_domain : katana-technology.com
cc_compile_date : Wed Apr 26 00:47:38 EDT 2006
[root@tst177 ~]# xm list
Name ID Mem(MiB) VCPUs State Time(s)
Domain-0 0 1877 2 r----- 36.5
(XEN) (GUEST: 3) Loading ROMBIOS ...
(XEN) (GUEST: 3) Loading Cirrus VGABIOS ...
(XEN) (GUEST: 3) Loading ACPI ...
(XEN) (GUEST: 3) Loading VMXAssist ...
(XEN) (GUEST: 3) VMX go ...
(XEN) (GUEST: 3) VMXAssist (Apr 26 2006)
(XEN) (GUEST: 3) Memory size 256 MB
(XEN) (GUEST: 3) E820 map:
(XEN) (GUEST: 3) 0000000000000000 - 000000000009F800 (RAM)
(XEN) (GUEST: 3) 000000000009F800 - 00000000000A0000 (Reserved)
(XEN) (GUEST: 3) 00000000000A0000 - 00000000000C0000 (Type 16)
(XEN) (GUEST: 3) 00000000000F0000 - 0000000000100000 (Reserved)
(XEN) (GUEST: 3) 0000000000100000 - 000000000FFFE000 (RAM)
(XEN) (GUEST: 3) 000000000FFFE000 - 000000000FFFF000 (Type 18)
(XEN) (GUEST: 3) 000000000FFFF000 - 0000000010000000 (Type 17)
(XEN) (GUEST: 3) 0000000010000000 - 0000000010003000 (ACPI NVS)
(XEN) (GUEST: 3) 0000000010003000 - 000000001000D000 (ACPI Data)
(XEN) (GUEST: 3) 00000000FEC00000 - 0000000100000000 (Type 16)
(XEN) (GUEST: 3)
(XEN) (GUEST: 3) Start BIOS ...
(XEN) (GUEST: 3) Starting emulated 16-bit real-mode: ip=F000:FFF0
(XEN) (GUEST: 3) rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $
(XEN) (GUEST: 3) Remapping master: ICW2 0x8 -> 0x20
(XEN) (GUEST: 3) Remapping slave: ICW2 0x70 -> 0x28
(XEN) (GUEST: 3) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50 vruppert Exp
$
(XEN) (GUEST: 3) HVMAssist BIOS, 8 cpus, $Revision: 1.138 $ $Date: 2005/05/07
15:55:26 $
(XEN) (GUEST: 3)
(XEN) (GUEST: 3) ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63
(XEN) (GUEST: 3) ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (12997 MBytes)
(XEN) (GUEST: 3) ata0 slave: Unknown device
(XEN) (GUEST: 3)
(XEN) (GUEST: 3) Booting from Hard Disk...
(XEN) (GUEST: 3) int13_harddisk: function 41, unmapped device for ELDL=81
(XEN) (GUEST: 3) int13_harddisk: function 08, unmapped device for ELDL=81
(XEN) (GUEST: 3) *** int 15h function AX=00C0, BX=0000 not yet supported!
(XEN) (GUEST: 3) int13_harddisk: function 15, unmapped device for ELDL=81
(XEN) (GUEST: 3) KBD: unsupported int 16h function 03
(XEN) (GUEST: 3) int13_harddisk: function 15, unmapped device for ELDL=81
(XEN) (GUEST: 3) *** int 15h function AX=E980, BX=E6F5 not yet supported!
(XEN) (GUEST: 3) int13_harddisk: function 02, unmapped device for ELDL=81
(XEN) (GUEST: 3) int13_harddisk: function 41, unmapped device for ELDL=81
32bit SMP guest has hung at this point. Last message on the guest console:
Uncompressing Linux... Ok, booting the kernel. File: regression.1
Time Level Message
05:00:50 INFO Reporting status: 'Test Running' for test:
ltp_gettimeofday02
05:00:52 INFO Preparing to run test 'ltp_gettimeofday02' using
profile: /qa/conductor/profiles/ltp/syscalls/gettimeofday02.xml
05:00:52 INFO Starting test 'ltp_gettimeofday02' using profile:
/qa/conductor/profiles/ltp/syscalls/gettimeofday02.xml
05:00:52 INFO Dispatching operation: RemoteShell
05:00:52 FINE Client sequencer got message requesting the start of a
new test: ltp_gettimeofday02
05:00:52 FINER Client sequencer sent message of type: 4 with seq num:
1 of size: 289 bytes
05:00:52 FINER Client sequencer handling new operation from control
sequencer
05:00:52 FINE Client sequencer looking for class:
com.katana.conductor.operations.RemoteShell
05:00:52 INFO Operation RemoteShell running
05:00:52 FINE Client sequencer was told that an operation is now
running
05:00:52 INFO RemoteShell: target node(s) = vs177
05:00:52 INFO ssh: /usr/bin/ssh root@vs177 cd
/qa/conductor/tests/ltp/testcases/bin; gettimeofday02
05:00:52 FINE ssh: waiting for command to finish
05:00:53 INFO ssh: gettimeofday02 0 INFO : checking if
gettimeofday is monotonous, takes 30s
05:00:53 INFO ssh: gettimeofday02 1 FAIL : Time is going backwards
(old 1145696453.61428 vs new 1145696453.60660!
05:00:53 FINE executeShellCmd(ssh): exit value is 1
05:00:53 SEVERE RemoteShell: command failed with error = 1
05:00:53 SEVERE Operation RemoteShell failed
05:00:53 SEVERE Reporting status: 'Test Failed' for test:
ltp_gettimeofday02
05:00:53 FINE Client sequencer detected operation completed with
status of: Fail
05:00:53 FINER Client sequencer sent message of type: 5 with seq num:
2 of size: 429 bytes
05:00:53 SEVERE Crash Collection disabled for queue : RHEL4U2-32b-XEN
05:00:53 INFO Cleaning up after test _______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home