> Stephan Böni wrote:
> > When i start my domU, often there are not all filesystems
> mounted, as
> > defined in /etc/fstab. In all cases the device nodes, like
> > /dev/hda3, are missing. After every reboot of my domU some other
> > device nodes are gone and others are now there, but never
> all of them.
> > That's really ugly.
> >
> > # mount
> > /dev/hda1 on / type reiserfs (rw,acl,user_xattr)
> > proc on /proc type proc (rw)
> > /dev/hda13 on /usr type reiserfs (rw)
> > /dev/hda2 on /cdb type reiserfs (rw)
> > /dev/hda4 on /data/docarchive type reiserfs (rw)
> > /dev/hda5 on /home type reiserfs (rw)
> > /dev/hda7 on /data/mailserver type reiserfs (rw)
> > /dev/hda8 on /data/pos type reiserfs (rw)
> > /dev/hda9 on /data/pub type reiserfs (rw)
> > /dev/hda11 on /tmp type reiserfs (rw)
> > /dev/hda12 on /data/transfer type reiserfs (rw)
> > /dev/hda14 on /var type reiserfs (rw)
> > #
> > # mount /dev/hda10
> > mount: special device /dev/hda10 does not exist
> > #
> > # mount /dev/hda3
> > mount: special device /dev/hda3 does not exist
> >
> > In the config file are all devices defined. Does anybody know a
> > solution for this problem?
>
> Are you using loop-Devices ?
> I don't know if i'm right. But is there not a limit on the count of
> loop-devices ?
>
No, i don't use loop devices. These are all lvm volumes. Here is my
config file:
------------------------------------------------
# -*- mode: python; -*-
# configuration name:
name = "inhouse"
# usable ram:
memory = 2048
# kernel und initrd:
kernel = "/boot/vmlinuz-xen"
ramdisk = "/boot/initrd-xen"
# network interface:
vif = [ 'mac=FE:FF:FF:FF:FF:01, bridge=xenbr0' ]
#dhcp = "dhcp"
hostname = name
# storage devices:
disk = [ 'phy:xenvg/inhouse-root,hda1,w',
'phy:xenvg/inhouse-cdb,hda2,w',
'phy:xenvg/inhouse-comserver,hda3,w',
'phy:xenvg/inhouse-docarchive,hda4,w',
'phy:xenvg/inhouse-home,hda5,w',
'phy:xenvg/inhouse-journal,hda6,w',
'phy:xenvg/inhouse-mailserver,hda7,w',
'phy:xenvg/inhouse-pos,hda8,w',
'phy:xenvg/inhouse-pub,hda9,w',
'phy:xenvg/inhouse-srv,hda10,w',
'phy:xenvg/inhouse-tmp,hda11,w',
'phy:xenvg/inhouse-transfer,hda12,w',
'phy:xenvg/inhouse-usr,hda13,w',
'phy:xenvg/inhouse-var,hda14,w',
'phy:xenvg/inhouse-swap,hdb1,w',
'phy:xenvg/susedvd,hdc1,r' ]
# boot device:
root = "/dev/hda1"
# boot to run level:
extra = "3"
------------------------------------------------
Stephan
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home