I have a
problem mounting filesystems in a Xen3 domU. Often some device nodes are
missing. Am i right, that normally udev creates the needed device nodes? It
seams now, that udev in a domU does not work correct. Or has anyone a solution,
why some devices are missing?
# ls -l
/dev/hda* brw-r----- 1 root disk 3, 1 Oct 18 11:19
/dev/hda1 brw-r----- 1 root disk 3, 11 Oct 18 11:19
/dev/hda11 brw-r----- 1 root disk 3, 14 Oct 18 11:19
/dev/hda14 brw-r----- 1 root disk 3, 8 Oct 18 11:19
/dev/hda8
Even if i try to
create the missing device node with the mknod command, i cannot mount
it.
# mknod /dev/hda3
b 3 3 # mount /dev/hda3 mount: /dev/hda3 is not a valid block
device
Appending the
needed devices in /etc/udev/static_devices.txt does not
help.
Here is my domU
configuration:
# cat inhouse |
grep -v ^# name = "inhouse" memory =
2048 maxcpus = 1 kernel = "/boot/vmlinuz-xen" ramdisk =
"/boot/initrd-xen" vif = [ 'mac=aa:cc:00:00:00:01, bridge=xenbr0'
] hostname = name disk = [
'phy:xenvg/inhouse-root,hda1,w',
'phy:xenvg/inhouse-cdb,hda2,w',
'phy:xenvg/inhouse-comserver,hda3,w',
'phy:xenvg/inhouse-docarchive,hda4,w',
'phy:xenvg/inhouse-home,hda5,w',
'phy:xenvg/inhouse-journal,hda6,w',
'phy:xenvg/inhouse-mailserver,hda7,w',
'phy:xenvg/inhouse-pos,hda8,w',
'phy:xenvg/inhouse-pub,hda9,w',
'phy:xenvg/inhouse-srv,hda10,w',
'phy:xenvg/inhouse-tmp,hda11,w',
'phy:xenvg/inhouse-transfer,hda12,w',
'phy:xenvg/inhouse-usr,hda13,w',
'phy:xenvg/inhouse-var,hda14,w',
'phy:xenvg/inhouse-swap,hdb1,w',
'phy:xenvg/susedvd,hdc1,r' ] root =
"/dev/hda1" extra = "3"
I have no hda
devices configured in my dom0.
Now i'm looking
very puzzled, because on every restart of my domU there are other hda devices
missing. Does anyone know how to solve this problem?
Stephan
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|