Stephan,
I had the qlogic stuff compiled into the kernel, but here is the lsmod
anyway as well as lspci. I am testing other stuff on that machine, but I
will go ahead and rebuild with qlogic as modules and let you know the
results.
.githogori.
-----------------------------------------
Linux localhost.localdomain 2.6.12-xen0-3.0-gQ-noUSB #3 SMP Fri Oct 7
14:19:38 PDT 2005 i686 i686 i386 GNU/Linux
[root@localhost ~]# lsmod
Module Size Used by
dcdbas 35740 1
video 14980 0
thermal 11528 0
processor 16320 1 thermal
fan 4228 0
button 5904 0
battery 8580 0
ac 4356 0
[root@localhost ~]# lspci
00:00.0 Host bridge: Intel Corp. E7520 Memory Controller Hub (rev 09)
00:02.0 PCI bridge: Intel Corp. E7525/E7520/E7320 PCI Express Port A
(rev 09)
00:04.0 PCI bridge: Intel Corp. E7525/E7520 PCI Express Port B (rev 09)
00:05.0 PCI bridge: Intel Corp. E7520 PCI Express Port B1 (rev 09)
00:06.0 PCI bridge: Intel Corp. E7520 PCI Express Port C (rev 09)
00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI
Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI
Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3
(rev 02)
00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI
Controller (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Interface
Bridge (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) IDE
Controller (rev 02)
01:00.0 PCI bridge: Intel Corp. 6700PXH PCI Express-to-PCI Bridge A (rev
09)
01:00.2 PCI bridge: Intel Corp. 6700PXH PCI Express-to-PCI Bridge B (rev
09)
02:0b.0 Fibre Channel: QLogic Corp. QLA2312 Fibre Channel Adapter (rev
02)
02:0b.1 Fibre Channel: QLogic Corp. QLA2312 Fibre Channel Adapter (rev
02)
03:05.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X
Fusion-MPT Dual Ultra320 SCSI (rev 08)
05:00.0 PCI bridge: Intel Corp. 6700PXH PCI Express-to-PCI Bridge A (rev
09)
05:00.2 PCI bridge: Intel Corp. 6700PXH PCI Express-to-PCI Bridge B (rev
09)
06:07.0 Ethernet controller: Intel Corp. 82541GI/PI Gigabit Ethernet
Controller (rev 05)
07:08.0 Ethernet controller: Intel Corp. 82541GI/PI Gigabit Ethernet
Controller (rev 05)
09:0d.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY
[Radeon 7000/VE]
[root@localhost
~]#
---------------------------------------------------------------
On Mon, 2005-10-10 at 18:32 +0200, Stephan Böni wrote:
> Please, could you tell me the output of your "lsmod". Perhaps there
> are some missing modules to load.
>
> Thanks
> Stephan
>
>
> > -----Ursprüngliche Nachricht-----
> > Von: Githogori Nyangara-Murage [mailto:githogori@xxxxxxxxxxxxx]
> > Gesendet: Freitag, 7. Oktober 2005 09:23
> > An: Ian Pratt
> > Cc: Stephan Böni; xen-users@xxxxxxxxxxxxxxxxxxx;
> > xen-devel@xxxxxxxxxxxxxxxxxxx; ian.pratt@xxxxxxxxxxxx;
> > githogori@xxxxxxxxxxxxx
> > Betreff: RE: [Xen-users] xen 3.0 boot problem
> >
> >
> > As I had stated earlier, I have again built Xen-unstable and have it
> > running on a Dell 1850 which has a qla2300 card. In fact
> > right now it is
> > busy beating up on the storage using ibre channel via the
> > qla2300. It is
> > on RHEL 4.1, and build against a vanilla Cambridge download, so this
> > should also work on SuSE.
> >
> > Below is a snippet of my messages file.
> >
> > .githogori.
> >
> > Oct 6 22:19:58 localhost kernel: Red Hat/Adaptec aacraid driver
> > (1.1.2-lk2 Oct 6 2005)
> > Oct 6 22:19:58 localhost kernel: QLogic Fibre Channel HBA Driver
> > Oct 6 22:19:58 localhost kernel: ACPI: PCI Interrupt
> > 0000:02:0b.0[A] ->
> > GSI 37 (level, low) -> IRQ 37
> > Oct 6 22:19:58 localhost kernel: qla2300 0000:02:0b.0: Found an
> > ISP2312, irq 37, iobase 0xe0002000
> > Oct 6 22:19:58 localhost kernel: scsi0 : qla2xxx
> > Oct 6 22:19:58 localhost kernel: qla2300 0000:02:0b.0:
> > Configuring PCI
> > space...
> > Oct 6 22:19:58 localhost kernel: qla2300 0000:02:0b.0:
> > Configure NVRAM
> > parameters...
> > Oct 6 22:19:58 localhost kernel: qla2300 0000:02:0b.0:
> > Verifying loaded
> > RISC code...
> > Oct 6 22:19:58 localhost kernel: qla2300 0000:02:0b.0:
> > Waiting for LIP
> > to complete...
> > Oct 6 22:19:58 localhost kernel: qla2300 0000:02:0b.0: Cable is
> > unplugged...
> > Oct 6 22:19:58 localhost kernel: qla2300 0000:02:0b.0:
> > Oct 6 22:19:58 localhost kernel: QLogic Fibre Channel HBA Driver:
> > 8.00.02b5-k
> > Oct 6 22:19:58 localhost kernel: QLogic QLA2342 - 133MHz
> > PCI-X to 2Gb
> > FC, Dual Channel
> > Oct 6 22:19:58 localhost kernel: ISP2312: PCI-X (133 MHz) @
> > 0000:02:0b.0 hdma-, host#=0, fw=3.03.08 IPX
> > Oct 6 22:19:58 localhost kernel: ACPI: PCI Interrupt
> > 0000:02:0b.1[B] ->
> > GSI 38 (level, low) -> IRQ 38
> > Oct 6 22:19:58 localhost kernel: qla2300 0000:02:0b.1: Found an
> > ISP2312, irq 38, iobase 0xe0004000
> > Oct 6 22:19:59 localhost kernel: scsi1 : qla2xxx
> > Oct 6 22:19:59 localhost kernel: qla2300 0000:02:0b.1:
> > Configuring PCI
> > space...
> > Oct 6 22:19:59 localhost kernel: qla2300 0000:02:0b.1:
> > Configure NVRAM
> > parameters...
> > Oct 6 22:19:59 localhost kernel: qla2300 0000:02:0b.1:
> > Verifying loaded
> > RISC code...
> > Oct 6 22:19:59 localhost kernel: qla2300 0000:02:0b.1:
> > Waiting for LIP
> > to complete...
> > Oct 6 22:19:59 localhost kernel: qla2300 0000:02:0b.1: LIP reset
> > occured (f8f7).
> > Oct 6 22:19:59 localhost kernel: qla2300 0000:02:0b.1: LIP occured
> > (f8f7).
> > Oct 6 22:19:59 localhost kernel: qla2300 0000:02:0b.1: LOOP
> > UP detected
> > (1 Gbps).
> > Oct 6 22:19:59 localhost kernel: qla2300 0000:02:0b.1: Topology -
> > (Loop), Host Loop address 0x7d
> > Oct 6 22:19:59 localhost kernel: qla2300 0000:02:0b.1:
> > Oct 6 22:19:59 localhost kernel: QLogic Fibre Channel HBA Driver:
> > 8.00.02b5-k
> > Oct 6 22:19:59 localhost kernel: QLogic QLA2342 - 133MHz
> > PCI-X to 2Gb
> > FC, Dual Channel
> > Oct 6 22:19:59 localhost kernel: ISP2312: PCI-X (133 MHz) @
> > 0000:02:0b.1 hdma-, host#=1, fw=3.03.08 IPX
> > Oct 6 22:19:59 localhost kernel: megaraid cmm: 2.20.2.5
> > (Release Date:
> > Fri Jan 21 00:01:03 EST 2005)
> > Oct 6 22:19:59 localhost kernel: megaraid: 2.20.4.5 (Release
> > Date: Thu
> > Feb 03 12:27:22 EST 2005)
> > Oct 6 22:19:59 localhost kernel: Vendor: DGC Model: RAID 5
> > Rev: 0411
> > Oct 6 22:19:59 localhost kernel: Type: Direct-Access
> > ANSI SCSI revision: 02
> > Oct 6 22:19:59 localhost kernel: 3ware Storage Controller
> > device driver
> > for Linux v1.26.02.001.
> > Oct 6 22:19:59 localhost kernel: SCSI device sda: 68317440 512-byte
> > hdwr sectors (34979 MB)
> >
> >
> > On Wed, 2005-10-05 at 21:28 +0100, Ian Pratt wrote:
> > > Has anyone used xen succefully with a qla2300?
> > >
> > > What machines have this card?
> > >
> > > Ian
> > >
> > > > I've installed Xen 3.0-devel on SUSE Linux without any problems.
> > > > But when i tryed to boot the system, i've got a funny problem:
> > > >
> > > > qla2300 0000:05:01.0: Found an ISP2312, irq 185, iobase
> > > > 0xf8812000 qla2300 0000:05:01.0: Configuring PCI space...
> > > > qla2300 0000:05:01.0: Configure NVRAM parameters...
> > > > qla2300 0000:05:01.0: Verifying loaded RISC code...
> > > > qla2300 0000:05:01.0: Waiting for LIP to complete...
> > > >
> > > > until here all works fine, but then:
> > > >
> > > > input: PS/2 Generic Mouse on synaptcs-pt/serio0 qla2300
> > > > 0000:05:01.0: LIP reset occured (f7f7).
> > > > qla2300 0000:05:01.0: LOOP UP detected (2 Gbps).
> > > > qla2300 0000:05:01.0: Topology - (F_Port), Host Loop
> > address 0xffff
> > > > scsi3 : qla2xxx
> > > > qla2300 0000:04:02.0:
> > > > QLogic Fibre Channel HBA Driver: 8.01.00b5-k
> > > > QLogic QLA2340 - 133MHz PCI-X to 2Gb FC, Single Channel
> > > > ISP2312: PCI-X (100 MHz) @ 0000:05:01.0 hdma+, host#=3,
> > > > fw=3.03.15 IPX
> > > > Loading kernel/fs/reiserfs/reiserfs.ko
> > > > Waiting for device /dev/sda4 to appear: .....not found ---
> > > > exiting to /bin/sh $
> > > >
> > > > if i use the standard (bigsmp) kernel the normal massages are:
> > > >
> > > > SCSI device sda: 41943040 512-byte hdwr sectors (21475 MB)
> > > > SCSI device sda: drive cache: write back SCSI device sda:
> > > > 41943040 512-byte hdwr sectors (21475 MB) SCSI device sda:
> > > > drive cache: write back
> > > > sda: sda1 sda2 sda3 sda4
> > > > ....usw.
> > > >
> > > > Well, my qla2300 has the storage attached not a generic mouse.
> > > > Of course it isn't possible to boot from this mouse. :-(
> > >
> > >
> > >
> > > _______________________________________________
> > > Xen-users mailing list
> > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > http://lists.xensource.com/xen-users
> >
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home