WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-devel

[Xen-devel] boot errors

To: <xen-devel@xxxxxxxxxxxxxxxxxxx>
Subject: [Xen-devel] boot errors
From: Stephan Böni <boeni@xxxxxx>
Date: Fri, 30 Sep 2005 15:42:52 +0200
Delivery-date: Fri, 30 Sep 2005 13:40:35 +0000
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
List-help: <mailto:xen-devel-request@lists.xensource.com?subject=help>
List-id: Xen developer discussion <xen-devel.lists.xensource.com>
List-post: <mailto:xen-devel@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=unsubscribe>
Sender: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
Thread-index: AcXFxNsODqkciMYBQye4+AmXok5ZJA==
Thread-topic: boot errors
I've compiled the 3.0-devel version on SUSE Linux 9.3. The ony problem is the 
qla2300 driver, which will not start all correctly on boot. So i cannot see 
other partitions than sda.

---------------------------------------------------------------------------------
QLogic Fibre Channel HBA Driver
ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 24 (level, low) -> IRQ 185
qla2300 0000:04:02.0: Found an ISP2312, irq 185, iobase 0xf8840000
scsi3 : qla2xxx
qla2300 0000:04:02.0: Configuring PCI space...
qla2300 0000:04:02.0: Configure NVRAM parameters...
qla2300 0000:04:02.0: Verifying loaded RISC code...
qla2300 0000:04:02.0: Waiting for LIP to complete...
qla2300 0000:04:02.0: LIP reset occured (f7f7).
qla2300 0000:04:02.0: LOOP UP detected (2 Gbps).
qla2300 0000:04:02.0: Topology - (F_Port), Host Loop address 0xffff
qla2300 0000:04:02.0:
 QLogic Fibre Channel HBA Driver: 8.00.02b5-k
  QLogic QLA2340 - 133MHz PCI-X to 2Gb FC, Single Channel
  ISP2312: PCI-X (100 MHz) @ 0000:04:02.0 hdma+, host#=3, fw=3.03.08 IPX
ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 48 (level, low) -> IRQ 193
qla2300 0000:05:01.0: Found an ISP2312, irq 193, iobase 0xf886c000
scsi4 : qla2xxx
  Vendor: IBM       Model: 1722-600          Rev: 0<6>qla2300 0000:05:01.0: Conf
iguring PCI space...
520
  Type:   Direct-Access                      ANSI SCSI revision: 03
qla2300 0000:05:01.0: Configure NVRAM parameters...
SCSI device sda: 41943040 512-byte hdwr sectors (21475 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 41943040 512-byte hdwr sectors (21475 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3
Attached scsi disk sda at scsi3, channel 0, id 0, lun 0
scsi: host 3 channel 0 id 0 lun1 has a LUN larger than allowed by the host adapt
er
scsi: host 3 channel 0 id 0 lun2 has a LUN larger than allowed by the host adapt
er
scsi: host 3 channel 0 id 0 lun3 has a LUN larger than allowed by the host adapt
er
scsi: host 3 channel 0 id 0 lun4 has a LUN larger than allowed by the host adapt
er
scsi: host 3 channel 0 id 0 lun31 has a LUN larger than allowed by the host adap
ter
  Vendor: IBM       Model: ULT3580-TD2       Rev: 4772
  Type:   Sequential-Access                  ANSI SCSI revision: 03
scsi: host 3 channel 0 id 1 lun1 has a LUN larger than allowed by the host adapt
er
qla2300 0000:05:01.0: Verifying loaded RISC code...
qla2300 0000:05:01.0: Waiting for LIP to complete...
qla2300 0000:05:01.0: LIP reset occured (f800).
qla2300 0000:05:01.0: LOOP UP detected (2 Gbps).
qla2300 0000:05:01.0: Topology - (F_Port), Host Loop address 0xffff
qla2300 0000:05:01.0:
---------------------------------------------------------------------------------

Do you have any solution?

Thanks
Stephan

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

<Prev in Thread] Current Thread [Next in Thread>