Re: [Xen-devel] Error starting xend

[David F Barrera <dfbp@xxxxxxxxxx>]

Nakajima, Jun wrote:

> Puthiyaparambil, Aravindh wrote:
>  
>
> > Oops I meant to post that too. This is what I see on the console.
> >
> > (XEN) DOM0: (file=mm.c, line=1055) Bad L1 flags 800000
> >    
>  
I am seeing that message, too, on a RHEL 4 box. It is happening at boot, 
in my case, as soon as the login screen is displayed.
Red Hat Enterprise Linux AS release 4 (Nahant)
Kernel 2.6.12-xen0 on an i686

lamb5 login: (XEN) DOM0: (file=mm.c, line=1055) Bad L1 flags 80000000
(XEN)
(XEN) DOM0: (file=mm.c, line=1055) Bad L1 flags 80000000
(XEN)
(XEN) DOM0: (file=mm.c, line=1055) Bad L1 flags 80000000
(XEN)
(XEN) DOM0: (file=mm.c, line=1055) Bad L1 flags 80000000
(XEN)
(XEN) DOM0: (file=mm.c, line=1055) Bad L1 flags 80000000
(XEN)
(XEN) DOM0: (file=mm.c, line=1055) Bad L1 flags 80000000
(XEN)
(XEN) DOM0: (file=mm.c, line=1055) Bad L1 flags 80000000
(XEN)


> This means non-NX/XD support is not complete yet. Can you figure out who
> in xenlinux made that request? If you can look at the return address of
> the hypercall, you can tell who it is.
>
> Jun
> ---
> Intel Open Source Technology Center
>
>  
>
> > Aravindh
> >
> >    
> >
> > > -----Original Message-----
> > > From: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-devel-
> > > bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Nakajima, Jun
> > > Sent: Friday, August 19, 2005 5:30 PM
> > > To: Puthiyaparambil, Aravindh; xen-devel@xxxxxxxxxxxxxxxxxxx
> > > Subject: RE: [Xen-devel] Error starting xend
> > >
> > > Puthiyaparambil, Aravindh wrote:
> > >      
> > >
> > > > I am seeing the following error on my SLES9 SP2 RC3 ES7000 x86_64
> > > > box while trying to start xend. 
> > > >
> > > > SLES9SP2RC3-x86-64:~/xen/vm # Traceback (most recent call last):  
> > > > File 
> > > >
> > > >        
> "/root/xen/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/xensto
>  
>
> > > > re/xsobj.py", line 328, in introduceDomain
> > > >    db.introduceDomain(dom, page, evtchn, path)
> > > >  File
> > > >
> > > >        
> "/root/xen/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/xensto
>  
>
> > > > re/xsnode.py", line 465, in introduceDomain
> > > >    self.store.introduceDomain(dom, page, evtchn, path)   File
> > > >
> > > >        
> "/root/xen/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/xensto
>  
>
> > > > re/xsnode.py", line 370, in introduceDomain
> > > >    self.getxs().introduce_domain(dom, page, evtchn.port1, path)
> > > > RuntimeError: (22, 'Invalid argument')
> > > >
> > > >
> > > > If I do an "xm list" after this I am able to see Dom0
> > > >
> > > > SLES9SP2RC3-x86-64:~/xen/vm # xm list
> > > > Name              Id  Mem(MB)  CPU VCPU(s)  State  Time(s)
> > > > Domain-0           0      507    0      1   r----     83.7
> > > >
> > > > When I try to start a VM I get the following error.
> > > >
> > > > SLES9SP2RC3-x86-64:~/xen/vm # xm create vm1
> > > > Using config file "vm1".
> > > > Error: Error creating domain: 'NoneType' object has no attribute
> > > > 'getRemotePort' 
> > > >
> > > > I did a clean rebuild but this continues to happen. Any idea why
> > > > this is happening?
> > > >        
> > > Did you check the error message on the console?
> > >
> > >      
> > >
> > > > Aravindh
> > > >
> > > >        
> > > Jun
> > > ---
> > > Intel Open Source Technology Center
> > >
> > > _______________________________________________
> > > Xen-devel mailing list
> > > Xen-devel@xxxxxxxxxxxxxxxxxxx
> > > http://lists.xensource.com/xen-devel
> > >      
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
>
>  
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel