Re: [Xen-devel] x86_64 SLES 9 SP2 build break

[David F Barrera <dfbp@xxxxxxxxxx>]

OK. More info on the x86_64 build on SLES 9 SP2. It built and booted 
fine; however, when I can't create a domU.
When attempting to create domU, it gives me the VFS: Unable to mount 
root fs on unknown-block (0,0) message.
This configurations have routinely worked before, so it is not a setup 
issue.
From console:

bl2-1 login: (XEN) (file=traps.c, line=878) Non-priv domain attempted 
RDMSR(0000
0000c0000080,00020000,00020000).
(XEN) (file=traps.c, line=870) Non-priv domain attempted 
WRMSR(00000000c0000100,
00000000,00000000).
(XEN) (file=traps.c, line=870) Non-priv domain attempted 
WRMSR(00000000c0000102,
00000000,00000000).
(XEN) (file=traps.c, line=878) Non-priv domain attempted 
RDMSR(00000000c0000080,
00000000,00000000).
stop_this_cpu disable_local_APIC
(XEN) (file=grant_table.c, line=523) Bad handle (0).
(XEN) (file=grant_table.c, line=1086) Grant unref rd(1) ld(0) frm(3f485) 
flgs(0)
.
(XEN) (file=traps.c, line=878) Non-priv domain attempted 
RDMSR(00000000c0000080,
00020000,00020000).
(XEN) (file=traps.c, line=870) Non-priv domain attempted 
WRMSR(00000000c0000100,
00000000,00000000).
(XEN) (file=traps.c, line=870) Non-priv domain attempted 
WRMSR(00000000c0000102,
00000000,00000000).
(XEN) (file=traps.c, line=878) Non-priv domain attempted 
RDMSR(00000000c0000080,
00000000,00000000).
stop_this_cpu disable_local_APIC





David F Barrera wrote:

> It seems that the x86_64 build still broken on FC4. It built on SLES 
> 9, but I got the following error on FC4:
> gcc -nostdinc -fno-builtin -fno-common -fno-strict-aliasing 
> -iwithprefix include -Wall -Werror -Wno-pointer-arith -pipe 
> -I/tmp/xen-unstable.hg/xen/include 
> -I/tmp/xen-unstable.hg/xen/include/asm-x86/mach-generic 
> -I/tmp/xen-unstable.hg/xen/include/asm-x86/mach-default -O3 
> -fomit-frame-pointer -msoft-float -m64 -mno-red-zone -fpic 
> -fno-reorder-blocks -fno-asynchronous-unwind-tables -DNDEBUG -DVERBOSE 
> -c physdev.c -o physdev.o
> cc1: warnings being treated as errors
> physdev.c: In function âdo_physdev_opâ:
> physdev.c:109: warning: pointer targets in assignment differ in 
> signedness
> make[3]: *** [physdev.o] Error 1
> make[3]: Leaving directory `/tmp/xen-unstable.hg/xen/arch/x86'
> make[2]: *** [/tmp/xen-unstable.hg/xen/xen] Error 2
> make[2]: Leaving directory `/tmp/xen-unstable.hg/xen'
> make[1]: *** [xen] Error 2
> make[1]: Leaving directory `/tmp/xen-unstable.hg'
> make: *** [world] Error 2
>
>
> Nakajima, Jun wrote:
>
> > Ryan Harper wrote:
> >  
> >
> > > > > You need x86_64 to run ASAP, not HOTPLUG_CPU for x86_64 smp,
> > > > > correct?       
> > > > No, we _do_ need HOTPLUG_CPU for x86_64 smp. The build problem is
> > > > not a big deal.
> > > >     
> > > Ah. OK.  I don't think it will be a problem for Xen, but currently in
> > > plain linux-2.6.13-rc6 (which has x86_64 HOTPLUG_CPU support),
> > > support is non-functional, at least on my two-way Opteron box.  I can
> > > remove a cpu (echo 0 > /sys/devices/system/cpu/cpu1/online) fine, but
> > > when I try to restore (echo 1), the processor fails to come back. 
> > > Part of this is that they are integrating the physical hotplug
> > > support which requires a full reboot of the processor (a second run
> > > through do_boot_cpu()) since it would have been physically removed.  
> > > I really wanted to see HOTPLUG_CPU work on plain Linux before
> > > bringing the code into XenLinux, but the issues may be tied up in
> > > code that Xen doesn't need.  The hypervisor will have to support
> > > physical hotplug before XenLinux will need it.
> > >   
> > That's right. As long as we handle VCPU, that should be Xen-specific and
> > common between x86 and x86_64 (although smp.c & smpboot.c are slightly
> > different there at this point).
> >
> >  
> >
> > > There are some other subtle differences in HOTPLUG_CPU in the newer
> > > 2.6.13 series for x86_64 compared to the level of HOTPLUG_CPU we have
> > > patched into the 2.6.12 tree.
> > >
> > > I'll go ahead and work up a patch that brings in HOTPLUG_CPU for
> > > x86_64 and share that so we both can work on getting it working.
> > >   
> > Great.
> > Jun
> > ---
> > Intel Open Source Technology Center
> >
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-devel
> >
> >  
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel