|
xen-devel
Re: [Xen-devel] RE: new /etc/xen/network script
I, too, am having network related issues. I am now seeing this problem
on a FC3 box, which previously had worked just fine. The networking is
working fine before I enter 'xend start'. No changes are made to the
network-bridge script that comes with the source, and the machine has
only only nic, eth0.
ifconfig before 'xend start':
[root@dbarrera ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0D:60:F0:C5:C8
inet addr:9.53.94.235 Bcast:9.53.94.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:99 errors:0 dropped:0 overruns:0 frame:0
TX packets:88 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:12299 (12.0 KiB) TX bytes:11426 (11.1 KiB)
Base address:0x2000 Memory:e8100000-e8120000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:26 errors:0 dropped:0 overruns:0 frame:0
TX packets:26 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2216 (2.1 KiB) TX bytes:2216 (2.1 KiB)
[root@dbarrera ~]# brctl show
bridge name bridge id STP enabled interfaces
[root@dbarrera ~]#
when 'xend start' is entered, these messages appear on console:
store_evtchn = 16
XENBUS xs_read_watch: 0
ifconfig AFTER 'xend start'eth0 Link encap:Ethernet HWaddr
00:0D:60:F0:C5:C8
inet addr:9.53.94.235 Bcast:9.53.94.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:380 errors:0 dropped:0 overruns:0 frame:0
TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:28046 (27.3 KiB) TX bytes:426 (426.0 b)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:26 errors:0 dropped:0 overruns:0 frame:0
TX packets:26 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2216 (2.1 KiB) TX bytes:2216 (2.1 KiB)
peth0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet addr:9.53.94.235 Bcast:9.53.94.255 Mask:255.255.255.0
UP BROADCAST RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:501 errors:0 dropped:0 overruns:0 frame:0
TX packets:111 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:44601 (43.5 KiB) TX bytes:12036 (11.7 KiB)
Base address:0x2000 Memory:e8100000-e8120000
vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3 errors:0 dropped:0 overruns:0 frame:0
TX packets:380 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:426 (426.0 b) TX bytes:28046 (27.3 KiB)
xen-br0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:375 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:22208 (21.6 KiB) TX bytes:0 (0.0 b)
[root@dbarrera ~]# brctl show
bridge name bridge id STP enabled interfaces
xen-br0 8000.feffffffffff no peth0
vif0.0
xen-br0 is up, but networking is dead. This is different from the previous
issues where xen-br0 was not coming up, but when
started manually networking resumed.
On 2 other machines, networking is up and working, Dom0 has networking running
correctly, but when I start a domU, it does not
have networking. I have 3 similar machines, only one of which has a domU with
working network; the other two don't, even though
they have very similar setups. This *may* end up being a setup issue (although
these same setups worked before), but I can't figure out what that could
be--everything looks
like it is supposed to be.
> So, ifdown does succeed in taking the interface down. I wander why the routes
> aren't getting removed?
>
> Could you do:
> ifconfig
> netstat -rn
> ifdown eth0
> netstat -rn
> ifconfig
>
> Thanks,
> Ian
>
>
> > -----Original Message-----
> > From: Zhai, Edwin [mailto:edwin.zhai@xxxxxxxxx]
> > Sent: 16 August 2005 16:57
> > To: Ian Pratt
> > Cc: xen-devel@xxxxxxxxxxxxxxxxxxx; ian.pratt@xxxxxxxxxxxx
> > Subject: RE: new /etc/xen/network script
> >
> >
> > ***Before***
> > [root@vt-edwin ~]# ifconfig
> >
> > eth0 Link encap:Ethernet HWaddr 00:0C:F1:FE:4C:5B
> >
> > inet addr:172.16.219.31 Bcast:172.16.219.255
> > Mask:255.255.255.0
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> >
> > RX packets:127 errors:0 dropped:0 overruns:0
> > frame:0
> > TX packets:65 errors:0 dropped:0 overruns:0
> > carrier:0
> > collisions:0 txqueuelen:1000
> >
> > RX bytes:18387 (17.9 KiB) TX bytes:6072 (5.9 KiB)
> >
> >
> >
> > lo Link encap:Local Loopback
> >
> > inet addr:127.0.0.1 Mask:255.0.0.0
> >
> > UP LOOPBACK RUNNING MTU:16436 Metric:1
> >
> > RX packets:16 errors:0 dropped:0 overruns:0 frame:0
> >
> > TX packets:16 errors:0 dropped:0 overruns:0
> > carrier:0
> > collisions:0 txqueuelen:0
> >
> > RX bytes:1168 (1.1 KiB) TX bytes:1168 (1.1 KiB)
> >
> > ***After ifdown eth0 ***
> > [root@vt-edwin ~]# ifconfig
> >
> > lo Link encap:Local Loopback
> >
> > inet addr:127.0.0.1 Mask:255.0.0.0
> >
> > UP LOOPBACK RUNNING MTU:16436 Metric:1
> >
> > RX packets:16 errors:0 dropped:0 overruns:0 frame:0
> >
> > TX packets:16 errors:0 dropped:0 overruns:0
> > carrier:0
> > collisions:0 txqueuelen:0
> >
> > RX bytes:1168 (1.1 KiB) TX bytes:1168 (1.1 KiB)
> >
> >
> > but
> > [root@vt-edwin ~]# ifconfig -a
> > eth0 Link encap:Ethernet HWaddr 00:0C:F1:FE:4C:5B
> > inet addr:172.16.219.31 Bcast:172.16.219.255
> > Mask:255.255.255.0
> > BROADCAST MULTICAST MTU:1500 Metric:1
> > RX packets:182 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:66 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:1000
> > RX bytes:25284 (24.6 KiB) TX bytes:6196 (6.0 KiB)
> >
> > lo Link encap:Local Loopback
> > inet addr:127.0.0.1 Mask:255.0.0.0
> > UP LOOPBACK RUNNING MTU:16436 Metric:1
> > RX packets:16 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:0
> > RX bytes:1168 (1.1 KiB) TX bytes:1168 (1.1 KiB)
> >
> > veth0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
> > BROADCAST MULTICAST MTU:1500 Metric:1
> > RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:0
> > RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
> >
> > vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
> > BROADCAST MULTICAST MTU:1500 Metric:1
> > RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:0
> > RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
> >
> > Ian Pratt <mailto:m+Ian.Pratt@xxxxxxxxxxxx> scribbled on
> > 2005年8月16日 23:41:
> >
> > >> ian,
> > >> as the discussion in this thread, service os netwok will
> > break after
> > >> xend start.
> > >> this simple patch can work on my mahine.
> > >> but strange error still occur in xend.log and xend start
> > takes more
> > >> time with ifdown/ifup.
> > >
> > > I guess the patch can't do any harm, but why doesn't ifdown
> > remove the
> > > routes?
> > >
> > > Before starting xend, please can you post the output of the
> > following
> > > sequence:
> > >
> > > ifconfig
> > > ifdown eth0
> > > ifconfig
> > >
> > > Thanks,
> > > Ian
> > >
> > >
> > >> @@ -192,6 +192,7 @@
> > >> ifconfig p${netdev} -arp down
> > >> ifconfig p${netdev} hw ether fe:ff:ff:ff:ff:ff
> > >> ifconfig ${netdev} hw ether ${mac}
> > >> + del_addrs p${netdev}
> > >> add_to_bridge ${bridge} vif0.0
> > >> add_to_bridge ${bridge} p${netdev}
> > >> ip link set vif0.0 up
> > >>
> > >>
> > >> --------------xend.log------------------------
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988) [network-bridge] +
> > >> set -e
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988) [network-bridge] +
> > >> OP=start
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988) [network-bridge] +
> > >> shift
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988) [network-bridge] +
> > >> for arg in '"$@"'
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988) [network-bridge] +
> > >> export bridge=xen-br0
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988) [network-bridge] +
> > >> bridge=xen-br0
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988) [network-bridge] +
> > >> for arg in '"$@"'
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988) [network-bridge] +
> > >> export antispoof=no
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988) [network-bridge] +
> > >> antispoof=no
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988) [network-bridge] +
> > >> bridge=xen-br0
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988) [network-bridge] +
> > >> netdev=eth0
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988) [network-bridge] +
> > >> antispoof=no
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988) [network-bridge] +
> > >> echo '*network start bridge=xen-br0 netdev=eth0 antispoof=no'
> > >> [2005-08-16 23:14:19 xend] INFO (__init__:988) [network-bridge]
> > >> network start bridge=xen-br0 netdev=eth0 antispoof=no [2005-08-16
> > >> 23:14:19 xend] ERROR (__init__:988) [network-bridge] +
> > case ${OP} in
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988) [network-bridge] +
> > >> op_start
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988) [network-bridge] +
> > >> '[' xen-br0 == null ']' [2005-08-16 23:14:19 xend] ERROR
> > >> (__init__:988) [network-bridge] + create_bridge xen-br0
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988) [network-bridge] +
> > >> local bridge=xen-br0
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988) [network-bridge] +
> > >> brctl show
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988) [network-bridge] +
> > >> grep -q xen-br0
> > >> [2005-08-16 23:14:19 xend] INFO (__init__:988) EVENT> xend.start 0
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988) [network-bridge] +
> > >> brctl addbr xen-br0
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988) [network-bridge] +
> > >> brctl stp xen-br0 off
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988) [network-bridge] +
> > >> brctl setfd xen-br0 0
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988) [network-bridge] +
> > >> ifconfig xen-br0 up
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988) [network-bridge] +
> > >> ifconfig
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988) [network-bridge] +
> > >> grep -q veth0
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988) [network-bridge] +
> > >> ifconfig veth0
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988) [network-bridge] +
> > >> grep -q veth0
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988)
> > [network-bridge] ++
> > >> ifconfig eth0
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988)
> > [network-bridge] ++
> > >> grep HWadd
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988)
> > [network-bridge] ++
> > >> sed -e 's/.*\(..:..:..:..:..:..\).*/\1/'
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988) [network-bridge] +
> > >> mac=00:0C:F1:FE:4C:5B
> > >> [2005-08-16 23:14:19 xend] ERROR (__init__:988) [network-bridge] +
> > >> ifdown eth0
> > >> [2005-08-16 23:14:20 xend] ERROR (__init__:988)
> > [network-bridge] + ip
> > >> link set eth0 name peth0
> > >> [2005-08-16 23:14:20 xend] ERROR (__init__:988)
> > [network-bridge] + ip
> > >> link set veth0 name eth0
> > >> [2005-08-16 23:14:20 xend] ERROR (__init__:988) [network-bridge] +
> > >> ifconfig peth0 -arp down
> > >> [2005-08-16 23:14:20 xend] ERROR (__init__:988) [network-bridge] +
> > >> ifconfig peth0 hw ether fe:ff:ff:ff:ff:ff
> > >> [2005-08-16 23:14:20 xend] ERROR (__init__:988) [network-bridge] +
> > >> ifconfig eth0 hw ether 00:0C:F1:FE:4C:5B
> > >> [2005-08-16 23:14:20 xend] ERROR (__init__:988) [network-bridge] +
> > >> del_addrs peth0
> > >> [2005-08-16 23:14:20 xend] ERROR (__init__:988) [network-bridge] +
> > >> local src=peth0
> > >> [2005-08-16 23:14:20 xend] ERROR (__init__:988)
> > [network-bridge] + ip
> > >> addr show dev peth0
> > >> [2005-08-16 23:14:20 xend] ERROR (__init__:988) [network-bridge] +
> > >> egrep '^ *inet '
> > >>
> > >> Best Rgds
> > >> Edwin
> >
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
--
Regards,
David F Barrera
Linux Technology Center
Systems and Technology Group, IBM
"The wisest men follow their own direction. "
Euripides
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
|
|
Home