Hi,
I'm running Xen-2.0.4 on a machine with 2 GB of memory.
I compiled a linux-2.6.10-xenU kernel with HIGHMEM=y
to make it able to use more than 896 MB of memory.
I then created a domain with memory=1024 name=Highmem, and then
did an 'xm balloon 256', which caused the xenU-kernel to crash.
# xm list
Name Id Mem(MB) CPU State Time(s) Console
Domain-0 0 123 0 r---- 63.5
Highmem 1 1 1 ----c 5.5 9601
and 'xm destroy Highmem' does not have any effect.
When I created a domain with memory=800 name=Highmem, and then
did an 'xm balloon 256', it worked fine.
Am I doing something wrong? Is this a known problem, or
does it work for everybody else?
------------------------------------------------------------
Here is the xend.log (the last four lines keep on being
added infinitly)
[2005-03-04 14:08:55 xend] DEBUG (XendDomainInfo:720) init_domain> Created
domain=1 name=Highmem memory=1024
[2005-03-04 14:08:55 xend] INFO (console:92) Created console id=15 domain=1
port=9601
[2005-03-04 14:08:56 xend] DEBUG (XendDomainInfo:1130) Creating vbd dom=1
uname=file:/home/testlars/t1.ext3
[2005-03-04 14:08:56 xend] DEBUG (blkif:155) Connecting blkif
<BlkifBackendInterface 1 0>
[2005-03-04 14:08:56 xend] DEBUG (XendDomainInfo:1107) Creating vif dom=1 vif=0
mac=aa:00:00:0b:c7:5d
[2005-03-04 14:08:56 xend] INFO (XendRoot:91) EVENT> xend.console.create [15,
1, 9601]
[2005-03-04 14:08:56 xend] INFO (XendRoot:91) EVENT> xend.domain.create
['Highmem', '1']
[2005-03-04 14:08:56 xend] INFO (XendRoot:91) EVENT> xend.domain.unpause
['Highmem', '1']
[2005-03-04 14:08:57 xend] DEBUG (blkif:201) Connecting blkif to event channel
<BlkifBackendInterface 1 0> ports=16:3
[2005-03-04 14:14:42 xend] DEBUG (XendDomain:244) XendDomain>reap> domain died
name=Highmem id=1
[2005-03-04 14:14:42 xend] INFO (XendDomain:564) Destroying domain: name=Highmem
[2005-03-04 14:14:42 xend] DEBUG (XendDomainInfo:665) Destroying vifs for
domain 1
[2005-03-04 14:14:42 xend] DEBUG (netif:290) Destroying vif domain=1 vif=0
[2005-03-04 14:14:42 xend] DEBUG (XendDomainInfo:674) Destroying vbds for
domain 1
[2005-03-04 14:14:42 xend] DEBUG (blkif:550) Destroying blkif domain=1
[2005-03-04 14:14:42 xend] DEBUG (blkif:406) Destroying vbd domain=1 idx=0
[2005-03-04 14:14:42 xend] DEBUG (XendDomainInfo:634) Closing console, domain 1
[2005-03-04 14:14:42 xend] DEBUG (XendDomainInfo:622) Closing channel to domain
1
[2005-03-04 14:14:45 xend] INFO (XendRoot:91) EVENT> xend.virq 4
[2005-03-04 14:14:45 xend] DEBUG (blkif:361) Unbinding vbd (type file) from
/dev/loop0
[2005-03-04 14:14:45 xend] INFO (XendRoot:91) EVENT> xend.domain.exit
['Highmem', '1', 'crash']
[2005-03-04 14:14:45 xend] INFO (XendRoot:91) EVENT> xend.domain.destroy
['Highmem', '1']
[2005-03-04 14:14:47 xend] DEBUG (XendDomain:244) XendDomain>reap> domain died
name=Highmem id=1
[2005-03-04 14:14:47 xend] INFO (XendDomain:564) Destroying domain: name=Highmem
[2005-03-04 14:14:47 xend] DEBUG (XendDomainInfo:634) Closing console, domain 1
[2005-03-04 14:14:47 xend] INFO (XendRoot:91) EVENT> xend.domain.exit
['Highmem', '1', 'crash']
[2005-03-04 14:14:47 xend] INFO (XendRoot:91) EVENT> xend.domain.destroy
['Highmem', '1']
[2005-03-04 14:14:49 xend] DEBUG (XendDomain:244) XendDomain>reap> domain died
name=Highmem id=1
[2005-03-04 14:14:49 xend] INFO (XendDomain:564) Destroying domain: name=Highmem
------------------------------------------------------------
Here is 'xm dmesg'
ERROR: cannot use unconfigured serial port COM1
__ __ ____ ___ _ _
\ \/ /___ _ __ |___ \ / _ \| || |
\ // _ \ '_ \ __) || | | | || |_
/ \ __/ | | | / __/ | |_| |__ _|
/_/\_\___|_| |_| |_____(_)___(_) |_|
http://www.cl.cam.ac.uk/netos/xen
University of Cambridge Computer Laboratory
Xen version 2.0.4 (larsr@xxxxxxxxxx) (gcc version 3.4.2 20041017 (Red Hat
3.4.2-6.fc3)) Fri Feb 25 18:01:50 PST 2005
Latest ChangeSet: information unavailable
(XEN) Physical RAM map:
(XEN) 0000000000000000 - 000000000009ec00 (usable)
(XEN) 000000000009ec00 - 00000000000a0000 (reserved)
(XEN) 00000000000e9400 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000007fff0000 (usable)
(XEN) 000000007fff0000 - 000000007ffffc00 (ACPI data)
(XEN) 000000007ffffc00 - 0000000080000000 (ACPI NVS)
(XEN) 00000000fec00000 - 00000000fec10000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000fff80000 - 0000000100000000 (reserved)
(XEN) System RAM: 2047MB (2096696kB)
(XEN) Xen heap: 10MB (10720kB)
(XEN) CPU0: Before vendor init, caps: 0387fbff 00000000 00000000, vendor = 0
(XEN) CPU caps: 0387fbff 00000000 00000000 00000000
(XEN) found SMP MP-table at 000f7570
(XEN) ACPI: RSDP (v000 PTLTD ) @ 0x000f7520
(XEN) ACPI: RSDT (v001 HP HWPC214 0x06040017 PTL 0x00000000) @ 0x7fffc8f7
(XEN) ACPI: FADT (v001 HP HWPC214 0x06040017 PTL 0x00000001) @ 0x7ffffb05
(XEN) ACPI: MADT (v001 PTLTD APIC 0x06040017 LTP 0x00000000) @ 0x7ffffb79
(XEN) ACPI: BOOT (v001 HP HWPC214 0x06040017 PTL 0x00000001) @ 0x7ffffbd9
(XEN) ACPI: DSDT (v001 HP HWPC214 0x06040017 MSFT 0x0100000b) @ 0x00000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x03] enabled)
(XEN) Processor #3 Pentium(tm) Pro APIC version 17
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 Pentium(tm) Pro APIC version 17
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) Using ACPI for processor (LAPIC) configuration information
(XEN) Intel MultiProcessor Specification v1.4
(XEN) Virtual Wire compatibility mode.
(XEN) OEM ID: HP Product ID: LP 1Kr/2Kr APIC at: 0xFEE00000
(XEN) I/O APIC #1 Version 17 at 0xFEC00000.
(XEN) I/O APIC #2 Version 17 at 0xFEC01000.
(XEN) Enabling APIC mode: Flat. Using 2 I/O APICs
(XEN) Processors: 2
(XEN) Using scheduler: Borrowed Virtual Time (bvt)
(XEN) Initializing CPU#0
(XEN) Detected 1000.129 MHz processor.
(XEN) CPU0: Before vendor init, caps: 0387fbff 00000000 00000000, vendor = 0
(XEN) CPU caps: 0387fbff 00000000 00000000 00000000
(XEN) CPU0 booted
(XEN) enabled ExtINT on CPU#0
(XEN) ESR value before enabling vector: 00000000
(XEN) ESR value after enabling vector: 00000000
(XEN) Booting processor 1/0 eip 90000
(XEN) Initializing CPU#1
(XEN) masked ExtINT on CPU#1
(XEN) ESR value before enabling vector: 00000000
(XEN) ESR value after enabling vector: 00000000
(XEN) CPU1: Before vendor init, caps: 0387fbff 00000000 00000000, vendor = 0
(XEN) CPU caps: 0387fbff 00000000 00000000 00000000
(XEN) CPU1 has booted.
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) Setting 1 in the phys_id_present_map
(XEN) ...changing IO-APIC physical APIC ID to 1 ... ok.
(XEN) Setting 2 in the phys_id_present_map
(XEN) ...changing IO-APIC physical APIC ID to 2 ... ok.
(XEN) init IO_APIC IRQs
(XEN) ..TIMER: vector=0x41 pin1=-1 pin2=0
(XEN) ...trying to set up timer (IRQ0) through the 8259A ...
(XEN) ..... (found pin 0) ...works.
(XEN) Using local APIC timer interrupts.
(XEN) Calibrating APIC timer for CPU0...
(XEN) ..... CPU speed is 1000.0497 MHz.
(XEN) ..... Bus speed is 133.3398 MHz.
(XEN) ..... bus_scale = 0x0000888D
(XEN) checking TSC synchronization across CPUs: passed.
(XEN) Time init:
(XEN) .... System Time: 61096354ns
(XEN) .... cpu_freq: 00000000:3B9CC1E8
(XEN) .... scale: 00000001:FFEF1809
(XEN) .... Wall Clock: 1109943491s 200000us
(XEN) PCI: PCI BIOS revision 2.10 entry at 0xfda11, last bus=1
(XEN) PCI: Using configuration type 1
(XEN) PCI: Probing PCI hardware
(XEN) PCI: Probing PCI hardware (bus 00)
(XEN) PCI: Discovered primary peer bus 01 [IRQ]
(XEN) PCI->APIC IRQ transform: (B0,I2,P0) -> 22
(XEN) PCI->APIC IRQ transform: (B0,I8,P0) -> 23
(XEN) PCI->APIC IRQ transform: (B0,I15,P0) -> 33
(XEN) PCI->APIC IRQ transform: (B1,I3,P0) -> 17
(XEN) PCI->APIC IRQ transform: (B1,I4,P0) -> 27
(XEN) PCI->APIC IRQ transform: (B1,I5,P0) -> 24
(XEN) PCI->APIC IRQ transform: (B1,I5,P1) -> 25
(XEN) mtrr: v2.0 (20020519)
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen-ELF header found:
'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=2.0,VIRT_BASE=0xC0000000,LOADER=generic,PT_MODE_WRITABLE'
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Kernel image: 00c00000->00fbbeb8
(XEN) Initrd image: 00fbc000->01173a00
(XEN) Dom0 alloc.: 01400000->09400000
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c0100000->c04ecf04
(XEN) Init. ramdisk: c04ed000->c06a4a00
(XEN) Phys-Mach map: c06a5000->c06c5000
(XEN) Page tables: c06c5000->c06c8000
(XEN) Start info: c06c8000->c06c9000
(XEN) Boot stack: c06c9000->c06ca000
(XEN) TOTAL: c0000000->c0800000
(XEN) ENTRY ADDRESS: c0100000
(XEN) Scrubbing DOM0 RAM: ..done.
(XEN) Initrd len 0x1b7a00, start at 0xc04ed000
(XEN) Scrubbing Free RAM: .....................done.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to
Xen).
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel
|
Home