Re: [Xen-devel] network dead after xend started

["Anton Titov" <a.titov@xxxxxxx>]

I've had this problem too, fixed it by starting xen-br0 manually at boot 
with commands:
 ifconfig eth0 0.0.0.0 promisc up
 brctl addbr xen-br0
 brctl setfd xen-br0 0
 brctl sethello xen-br0 0
 brctl stp xen-br0 off
 brctl addif xen-br0 eth0
 ifconfig xen-br0 xxx.xxx.xxx.xxx broadcast xxx.xxx.xxx.xxx netmask 
xxx.xxx.xxx.xxx up
 route add default gw xxx.xxx.xxx.xxx

works for me

Regards,
Anton Titov

----- Original Message ----- 
From: "Michael Stoehrel" <mstoehrel@xxxxxxxxxxx>
To: <xen-devel@xxxxxxxxxxxxxxxxxxxxx>
Sent: Thursday, February 17, 2005 7:02 PM
Subject: [Xen-devel] network dead after xend started


> Installed xen-2.0.4 from sources.
> boot 2.6.10-xen0
> interface has fixed ip
> ping to other systems are good
> ping from other systems are good
> starting xend /etc/init.d/xend start
> all networking is dead.
> And of course after starting a vm the network is dead, too...
>
> If I install the binary 2.0.4: No network at all:
>
> what did I missed?
>
> Michael
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.sourceforge.net/lists/listinfo/xen-devel 

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel