| |
|
 |
|
 |
|
|
|
| |
|
|
xen-devel
RE: [Xen-devel] ask help on booting xen
When I use redhat AS 3.0 the scsi driver for 53c1030 is mptscsih
when I build 2.6.9 kernel for my dell 650 machine, MPTbase module can
not be found in the kernel, MPTbase module will be used by mptscsih.
It is same when I build xen/xenlinux 2.6.9.
thanks,
-Ning
-----Original Message-----
From: xen-devel-admin@xxxxxxxxxxxxxxxxxxxxx
[mailto:xen-devel-admin@xxxxxxxxxxxxxxxxxxxxx] On Behalf Of Ian Pratt
Sent: Wednesday, January 12, 2005 5:15 PM
To: Sun, Ning; Derek Glidden; Xen List
Subject: RE: [Xen-devel] ask help on booting xen
Looks like your scsi driver isn't compiled into the kernel.
Not sure what driver you need for a 53C1030, maybe
CONFIG_SCSI_SYM53C8XX_2
You'll have to pull the source tar ball and follow the instructions for
configuring your kernel.
Ian
> -----Original Message-----
> From: xen-devel-admin@xxxxxxxxxxxxxxxxxxxxx
> [mailto:xen-devel-admin@xxxxxxxxxxxxxxxxxxxxx] On Behalf Of Sun, Ning
> Sent: 12 January 2005 08:44
> To: Derek Glidden; Xen List
> Subject: [Xen-devel] ask help on booting xen
>
>
> I met a problem when booting xen in dom0, the out is like this:
> md:.. autorun Done.
> Root-NFS: No NFS server available, giving up.
> VFS: Unable to mount root fs via NFS, trying floppy.
> VFS: Insert root floop and press ENTER.
>
> my grub is like this:
> title xen 2.0 / Xenlinux 2.6.9
> kernel /boot/xen.gz dom0_men=131072
> module /boot/vmlinuz-2.6.9-xen0 root=/dev/sda4 ro console=tty0
>
> My machine is Dell workstation 650, scsi controller is LSI Logic
> 53C1030, my linux is redhat AS 3.0
>
> Is there anything wrong with my grub?
> How can I fix this problem?
>
> Thanks,
> -Ning
>
> -----Original Message-----
> From: xen-devel-admin@xxxxxxxxxxxxxxxxxxxxx
> [mailto:xen-devel-admin@xxxxxxxxxxxxxxxxxxxxx] On Behalf Of Derek
> Glidden
> Sent: Wednesday, January 12, 2005 10:03 AM
> To: Xen List
> Subject: [Xen-devel] -testing goes to 100%
>
> Built and installed 2.0-testing from tarball as of today
> against 2.6.10
> patches for Dom0, and xend takes the CPU to 100% and leaves it there.
> Dropping back down to 2.0.2/2.6.9 makes it all appear
> business-as-usual
> so far.
>
> Any "xm" commands go off into lala land without ever
> returning, but do
> respond to CTRL-C as one might expect and bring you back to the
> command-prompt.
>
> Base system is gentoo. Athlon-XP. My own kernel configs and not the
> ones built by xen, but the same config is used for
> 2.0.2/2.6.9 with no
> problems. (I used "make oldconfig" to build the -testing binaries.)
>
> Anything I can do to instrument this and see where the
> problem may lie?
>
>
> -------------------------------------------------------
> The SF.Net email is sponsored by: Beat the post-holiday blues
> Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
> It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.sourceforge.net/lists/listinfo/xen-devel
>
>
> -------------------------------------------------------
> The SF.Net email is sponsored by: Beat the post-holiday blues
> Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
> It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.sourceforge.net/lists/listinfo/xen-devel
>
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel
|
|
|
| |
|
Home