Freeing unused kernel memory: 100k freed sh-2.05b# sh-2.05b # cat /usr/src/cm/k-b /sbin/kexec --load /usr/src/cm/xen/xen-2.0.bk-beta/xen/xen --type=multiboot-x86 \ --command-line="dom0_mem=65536 noacpi com1=19200,8n1 console=com1" \ --module="/boot/vmlinuz-2.6.8.1-i586-xen0-full root=/dev/hda1 console=ttyS0,19200 xencons=ttyS" sh-2.05b# source /usr/src/cm/k-b kexec_load succeeded (multiboot-x86) sh-2.05b# /sbin/kexec -e Starting new kernel __ __ ____ ___ _ _ \ \/ /___ _ __ |___ \ / _ \ | |__ ___| |_ __ _ \ // _ \ '_ \ __) || | | |__| '_ \ / _ \ __/ _` | / \ __/ | | | / __/ | |_| |__| |_) | __/ || (_| | /_/\_\___|_| |_| |_____(_)___/ |_.__/ \___|\__\__,_| http://www.cl.cam.ac.uk/netos/xen University of Cambridge Computer Laboratory Xen version 2.0-beta (root@xxxxxxxxxxxxxxx) (gcc version 3.3.3 (SuSE Linux)) Sun Dec 5 20:50:06 MST 2004 (XEN) Initialised 256MB memory (65536 pages) on a 256MB machine (XEN) Xen heap size is 6696KB (XEN) CPU0: Before vendor init, caps: 00803135 80803135 00000000, vendor = 5 (XEN) CPU caps: 00803135 80803135 00000000 00000000 (XEN) Using scheduler: Borrowed Virtual Time (bvt) (XEN) Initializing CPU#0 (XEN) Detected 533.363 MHz processor. (XEN) No local APIC present or hardware disabled (XEN) CPU0: Before vendor init, caps: 00803135 80803135 00000000, vendor = 5 (XEN) CPU caps: 00803135 80803135 00000000 00000000 (XEN) CPU0 booted (XEN) SMP motherboard not detected. (XEN) Local APIC not detected. Using dummy APIC emulation. (XEN) Time init: (XEN) .... System Time: 20002173ns (XEN) .... cpu_freq: 00000000:1FCA7A78 (XEN) .... scale: 00000001:DFF91769 (XEN) .... Wall Clock: 1102356470s 60000us (XEN) PCI: Using configuration type 1 (XEN) PCI: Probing PCI hardware (XEN) PCI: Probing PCI hardware (bus 00) (XEN) PCI: Using IRQ router VIA [1106/8231] at 00:11.0 (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen-ELF header found: 'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=2.0,VIRT_BASE=0xC0000000,LOADER=generic,PT_MODE_WRITABLE' (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Kernel image: 02800000->02a9e964 (XEN) Initrd image: 00000000->00000000 (XEN) Dom0 alloc.: 02c00000->06c00000 (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: c0100000->c03cd0c4 (XEN) Init. ramdisk: c03ce000->c03ce000 (XEN) Phys-Mach map: c03ce000->c03de000 (XEN) Page tables: c03de000->c03e1000 (XEN) Start info: c03e1000->c03e2000 (XEN) Boot stack: c03e2000->c03e3000 (XEN) TOTAL: c0000000->c0800000 (XEN) ENTRY ADDRESS: c0100000 (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen). Linux version 2.6.8.1-xen0 (root@redbull) (gcc version 3.3.3 (SuSE Linux)) #10 Sun Dec 5 19:44:41 MST 2004 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000004000000 (usable) 64MB LOWMEM available. DMI not present. Built 1 zonelists Kernel command line: root=/dev/hda1 console=ttyS0,19200 xencons=ttyS Initializing CPU#0 PID hash table entries: 512 (order 9: 4096 bytes) Xen reported: 533.363 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 61788k/65536k available (1965k kernel code, 3652k reserved, 566k data, 120k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 1064.96 BogoMIPS Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line) CPU: L2 Cache: 64K (32 bytes/line) CPU: Centaur VIA Samuel 2 stepping 03 Checking 'hlt' instruction... disabled NET: Registered protocol family 16 PCI: Using configuration type Xen PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Probing PCI hardware Initializing Cryptographic API RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Using anticipatory io scheduler nbd: registered device at major 43 pcnet32.c:v1.30i 06.28.2004 tsbogend@xxxxxxxxxxxxxxxx Xen virtual console successfully installed as ttyS Event-channel device installed. Initialising Xen netif backend Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hda: STI Flash 6.2.0, CFA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 128KiB hda: 125184 sectors (64 MB) w/1KiB Cache, CHS=978/4/32 hda: hda1 mice: PS/2 mouse device common for all mice i8042.c: Can't read CTR while initializing i8042. md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 809.200 MB/sec 8regs_prefetch: 592.400 MB/sec 32regs : 264.800 MB/sec 32regs_prefetch: 313.600 MB/sec pII_mmx : 618.400 MB/sec p5_mmx : 669.600 MB/sec raid5: using function: 8regs (809.200 MB/sec) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@xxxxxxxxxxxxxx NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 8192) NET: Registered protocol family 1 NET: Registered protocol family 17 Bridge firewalling registered md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. hda: hda1 hda: hda1 hda: hda1 EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended VFS: Mounted root (ext2 filesystem). Freeing unused kernel memory: 120k freed Warning: unable to open an initial console. Kernel panic: No init found. Try passing init= option to kernel.