Inspecting /boot/System.map-2.6.8.1-xen0 Loaded 17175 symbols from /boot/System.map-2.6.8.1-xen0. Symbols match kernel version 2.6.8. No module symbols loaded - kernel modules not enabled. klogd 1.4.1, log source = ksyslog started. <4>Linux version 2.6.8.1-xen0 (root@redbull) (gcc version 3.3.3 (SuSE Linux)) #3 Tue Oct 26 16:56:24 MDT 2004 <6>BIOS-provided physical RAM map: <4> Xen: 0000000000000000 - 0000000004000000 (usable) <5>64MB LOWMEM available. <7>On node 0 totalpages: 16384 <7> DMA zone: 4096 pages, LIFO batch:1 <7> Normal zone: 12288 pages, LIFO batch:3 <7> HighMem zone: 0 pages, LIFO batch:1 <6>DMI not present. <4>Built 1 zonelists <4>Kernel command line: root=/dev/hda1 <6>Initializing CPU#0 <4>PID hash table entries: 512 (order 9: 4096 bytes) <6>Xen reported: 865.940 MHz processor. <6>Using tsc for high-res timesource <4>Console: colour VGA+ 80x25 <4>Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) <4>Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) <6>Memory: 61744k/65536k available (1987k kernel code, 3700k reserved, 587k data, 124k init, 0k highmem) <4>Checking if this processor honours the WP bit even in supervisor mode... Ok. <4>Calibrating delay loop... 1730.15 BogoMIPS <4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes) <7>CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 <7>CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 <6>CPU: L1 I cache: 16K, L1 D cache: 16K <6>CPU: L2 cache: 512K <7>CPU: After all inits, caps: 0283cbf1 00000000 00000000 00000040 <4>CPU: Intel(R) Pentium(R) III Mobile CPU 866MHz stepping 01 <6>Enabling unmasked SIMD FPU exception support... done. <6>Checking 'hlt' instruction... disabled <6>NET: Registered protocol family 16 <6>PCI: Using configuration type Xen <6>PCI: Probing PCI hardware <4>PCI: Probing PCI hardware (bus 00) <4>PCI: Probing PCI hardware (bus 01) <4>PCI: Probing PCI hardware (bus 02) <4>PCI: Probing PCI hardware <6>Initializing Cryptographic API <4>RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize <6>loop: loaded (max 8 devices) <4>Using anticipatory io scheduler <6>nbd: registered device at major 43 <6>pcnet32.c:v1.30i 06.28.2004 tsbogend@xxxxxxxxxxxxxxxx <4>Xen virtual console successfully installed as ttyS <4>Event-channel device installed. <4>Initialising Xen netif backend <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>ICH3M: IDE controller at PCI slot 0000:00:1f.1 <4>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) <6>PCI: Obtained IRQ 11 for device 0000:00:1f.1 <6>ICH3M: chipset revision 1 <6>ICH3M: not 100%% native mode: will probe irqs later <6> ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio <6> ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio <4>hda: IC25N020ATCX04-0, ATA DISK drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>hdc: LG CD-ROM CRN-8245B, ATAPI CD/DVD-ROM drive <4>ide1 at 0x170-0x177,0x376 on irq 15 <4>hda: max request size: 128KiB <6>hda: 39070080 sectors (20003 MB) w/1768KiB Cache, CHS=38760/16/63, UDMA(100) <6> hda: hda1 hda2 <4>hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33) <6>Uniform CD-ROM driver Revision: 3.20 <6>mice: PS/2 mouse device common for all mice <6>serio: i8042 AUX port at 0x60,0x64 irq 12 <6>input: PS/2 Generic Mouse on isa0060/serio1 <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>input: AT Translated Set 2 keyboard on isa0060/serio0 <6>md: raid0 personality registered as nr 2 <6>md: raid1 personality registered as nr 3 <6>md: raid5 personality registered as nr 4 <6>raid5: automatically using best checksumming function: pIII_sse <4> pIII_sse : 1255.600 MB/sec <4>raid5: using function: pIII_sse (1255.600 MB/sec) <6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@xxxxxxxxxxxxxx <6>NET: Registered protocol family 2 <6>IP: routing cache hash table of 512 buckets, 4Kbytes <6>TCP: Hash tables configured (established 4096 bind 8192) <6>NET: Registered protocol family 1 <6>NET: Registered protocol family 17 <5>Bridge firewalling registered <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hda1, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <4>VFS: Mounted root (ext3 filesystem). <6>Freeing unused kernel memory: 124k freed <6>EXT3 FS on hda1, internal journal <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>Adding 257032k swap on /dev/hda2. Priority:42 extents:1 Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Wed Oct 27 10:29:05 2004 Master Resource Control: previous runlevel: N, switching to runlevel: 3 start services (random isdn hotplug) Hotplug is already active (disable with NOHOTPLUG=1 at the boot prompt)done Initializing random number generatordone exit status of (random isdn hotplug) is (0 0 0) start services (coldplug) coldplug scanning input: **done scanning pci: *****.*WWW*done scanning usb: done . . . . . . . . . . . . . . . . . . . . . . . .done exit status of (coldplug) is (0) start services (pcmcia) Starting PCMCIA startproc: execve (/sbin/cardmgr) [ /sbin/cardmgr ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=24 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 sscripts=44 _=/sbin/startproc DAEMON=/sbin/cardmgr ] startproc: exit status of parent of /sbin/cardmgr: 1 failed exit status of (pcmcia) is (7) start services (network) Setting up network interfaces: lo lo IP address: 127.0.0.1/8 done eth0 device: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 41) eth0 configuration: eth-id-00:d0:59:33:6e:e0 eth0 IP address: 10.0.10.5/16 doneWaiting for mandatory devices: eth-id-00:10:a4:e5:7e:ae 19 18 17 16 15 14 13 12 11 10 9 8 6 5 4 3 2 1 0 eth-id-00:10:a4:e5:7e:ae No interface found failedSetting up service network . . . . . . . . . . . . . . . .failed exit status of (network) is (7) start services (syslog) Starting syslog servicesstartproc: execve (/sbin/syslogd) [ /sbin/syslogd -a /var/lib/ntp/dev/log ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=26 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 sscripts=44 _=/sbin/startproc DAEMON=/sbin/syslogd ] startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=26 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 sscripts=44 _=/sbin/startproc DAEMON=/sbin/klogd ] done exit status of (syslog) is (0) start services (smbfs) Mount SMB/ CIFS File Systems unused exit status of (smbfs) is (6) start services (splash_early resmgr portmap) startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=28 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 sscripts=44 _=/sbin/startproc DAEMON=/sbin/portmap ] startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=28 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 sscripts=44 _=/sbin/startproc DAEMON=/sbin/resmgrd ] Starting RPC portmap daemondone Starting resource managerdone exit status of (splash_early resmgr portmap) is (0 0 0) start services (nfsboot) Starting nfsboot (sm-notify) done exit status of (nfsboot) is (0) start services (sshd running-kernel powersaved fbset alsasound) startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=32 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] Starting sound driver: intel8x0FATAL: Module snd_intel8x0 not found. failed Starting SSH daemondone startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -e /etc/powersave.conf -a resmgr -v 3 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=32 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/powersaved ] skipped Starting powersaved skipped exit status of (sshd running-kernel powersaved fbset alsasound) is (0 0 5 0 0) start services (splash postfix kbd cups) startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=37 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ] Starting cupsddone Starting mail service (Postfix)Loading keymap qwerty/us.map.gz doneLoading compose table winkeys shiftctrl latin1.adddone Start Unicode mode done doneLoading console font lat9w-16.psfu -m trivial (K doneexit status of (splash postfix kbd cups) is (5 0 0 0) start services (nscd hwscan cron) Starting hardware scan on bootstartproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=41 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=41 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/cron ] Starting CRON daemondone Starting Name Service Cache Daemondone exit status of (nscd hwscan cron) is (0 0 0) start services (splash_late) exit status of (splash_late) is (0) Master Resource Control: runlevel 3 has been reached Failed services in runlevel 3: pcmcia network Skipped services in runlevel 3: smbfs powersaved splash killproc: kill(1137,3)