Inspecting /boot/System.map-2.6.8.1-bproc
Loaded 25402 symbols from /boot/System.map-2.6.8.1-bproc.
Symbols match kernel version 2.6.8.
No module symbols loaded - kernel modules not enabled.

klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.6.8.1-bproc (root@linux) (gcc version 3.3.3 (SuSE Linux)) #1 Sat Oct 23 16:22:50 MDT 2004
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
<4> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 0000000007f60000 (usable)
<4> BIOS-e820: 0000000007f60000 - 0000000007f7a000 (ACPI data)
<4> BIOS-e820: 0000000007f7a000 - 0000000007f7c000 (ACPI NVS)
<4> BIOS-e820: 0000000007f7c000 - 0000000008000000 (reserved)
<4> BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
<5>0MB HIGHMEM available.
<5>127MB LOWMEM available.
<7>On node 0 totalpages: 32608
<7>  DMA zone: 4096 pages, LIFO batch:1
<7>  Normal zone: 28512 pages, LIFO batch:6
<7>  HighMem zone: 0 pages, LIFO batch:1
<6>DMI present.
<6>ACPI: RSDP (v002 IBM                                       ) @ 0x000f73d0
<6>ACPI: XSDT (v001 IBM    TP-1A    0x00001012  LTP 0x00000000) @ 0x07f6fe3c
<6>ACPI: FADT (v001 IBM    TP-1A    0x00001012 IBM  0x00000001) @ 0x07f6fe80
<6>ACPI: SSDT (v001 IBM    TP-1A    0x00001012 MSFT 0x0100000d) @ 0x07f6ff34
<6>ACPI: ECDT (v001 IBM    TP-1A    0x00001012 IBM  0x00000001) @ 0x07f79f87
<6>ACPI: BOOT (v001 IBM    TP-1A    0x00001012  LTP 0x00000001) @ 0x07f79fd8
<6>ACPI: DSDT (v001 IBM    TP-1A    0x00001012 MSFT 0x0100000d) @ 0x00000000
<6>ACPI: PM-Timer IO Port: 0x1008
<4>Built 1 zonelists
<4>Kernel command line: root=/dev/hda1 vga=0x314 linux26 desktop resume=/dev/hda2 splash=silent
<4>Local APIC disabled by BIOS -- reenabling.
<4>Found and enabled local APIC!
<6>Initializing CPU#0
<4>PID hash table entries: 512 (order 9: 4096 bytes)
<4>Detected 865.961 MHz processor.
<6>Using pmtmr for high-res timesource
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>Memory: 125448k/130432k available (1975k kernel code, 4448k reserved, 703k data, 168k init, 0k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<4>Calibrating delay loop... 1716.22 BogoMIPS
<6>Security Scaffold v1.0.0 initialized
<6>SELinux:  Initializing.
<6>SELinux:  Starting in permissive mode
<4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
<7>CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000
<7>CPU: After vendor identify, caps:  0383fbff 00000000 00000000 00000000
<6>CPU: L1 I cache: 16K, L1 D cache: 16K
<6>CPU: L2 cache: 512K
<7>CPU: After all inits, caps:        0383fbff 00000000 00000000 00000040
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<4>CPU: Intel(R) Pentium(R) III Mobile CPU       866MHz stepping 01
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<6>Checking for popad bug... OK.
<4>enabled ExtINT on CPU#0
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>Using local APIC timer interrupts.
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 865.0807 MHz.
<4>..... host bus clock speed is 133.0201 MHz.
<6>NET: Registered protocol family 16
<6>PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8
<6>PCI: Using configuration type 1
<6>mtrr: v2.0 (20020519)
<6>ACPI: Subsystem revision 20040326
<4>ACPI: IRQ9 SCI: Level Trigger.
<6>ACPI: Found ECDT
<3>ACPI: Could not use ECDT
<4>    ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC_.FDC_._INI] (Node c7e088e0), AE_NOT_EXIST
<4>    ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__._INI] (Node c1190e20), AE_NOT_EXIST
<4>    ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node c1191640), AE_NOT_EXIST
<4>    ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node c1191640), AE_NOT_EXIST
<4>    ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node c11914c0), AE_NOT_EXIST
<4>    ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node c11914c0), AE_NOT_EXIST
<4>    ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BGID] (Node c7e08a20), AE_NOT_EXIST
<4>    ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BINI] (Node c7e08a40), AE_NOT_EXIST
<4>    ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node c7e08a80), AE_NOT_EXIST
<4>    ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node c7e08940), AE_NOT_EXIST
<4>    ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node c7e08940), AE_NOT_EXIST
<4>    ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BGID] (Node c7e08a20), AE_NOT_EXIST
<4>    ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BINI] (Node c7e08a40), AE_NOT_EXIST
<4>    ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node c7e08a80), AE_NOT_EXIST
<4>    ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.USB0.URTH.UNST._STA] (Node c7e08f60), AE_NOT_EXIST
<4>    ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.USB0.URTH.UNST._STA] (Node c7e08f60), AE_NOT_EXIST
<4>    ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BGID] (Node c7e08a20), AE_NOT_EXIST
<4>    ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BINI] (Node c7e08a40), AE_NOT_EXIST
<4>    ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node c7e08a80), AE_NOT_EXIST
<4>    ACPI-1133: *** Error: Method execution failed [\_SB_.NEST._STA] (Node c7e0a780), AE_NOT_EXIST
<4>    ACPI-0154: *** Error: Method execution failed [\_SB_.NEST._STA] (Node c7e0a780), AE_NOT_EXIST
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11)
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<6>PCI: Transparent bridge - 0000:00:1e.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<6>ACPI: Embedded Controller [EC] (gpe 28)
<6>ACPI: Power Resource [PUBS] (on)
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>PCI: Using ACPI for IRQ routing
<4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
<6>ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 5 (level, low) -> IRQ 5
<4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
<6>ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11
<4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
<6>ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11
<6>ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11
<4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
<6>ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 9 (level, low) -> IRQ 9
<6>ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 9 (level, low) -> IRQ 9
<6>ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 5 (level, low) -> IRQ 5
<6>ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 5 (level, low) -> IRQ 5
<6>ACPI: PCI interrupt 0000:02:00.1[B] -> GSI 9 (level, low) -> IRQ 9
<6>ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 11 (level, low) -> IRQ 11
<4>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
<6>ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 10 (level, low) -> IRQ 10
<6>vesafb: framebuffer at 0xe8000000, mapped to 0xc8814000, size 1875k
<6>vesafb: mode is 800x600x16, linelength=1600, pages=16
<6>vesafb: protected mode interface info at c000:988c
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<6>fb0: VESA VGA frame buffer device
<6>Simple Boot Flag at 0x35 set to 0x1
<4>IBM T23 - BIOS 1.03b+ and controller firmware 1.02+ may be needed for Linux APM.
<6>IBM machine detected. Enabling interrupts during APM calls.
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
<5>apm: overridden by ACPI.
<6>audit: initializing netlink socket (disabled)
<3>audit(1098893356.4294965977:0): initialized
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>SELinux:  Registering netfilter hooks
<6>Initializing Cryptographic API
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<4>Console: switching to colour frame buffer device 100x37
<6>Real Time Clock Driver v1.12
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>ICH3M: IDE controller at PCI slot 0000:00:1f.1
<4>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
<6>ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11
<6>ICH3M: chipset revision 1
<6>ICH3M: not 100%% native mode: will probe irqs later
<6>    ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
<6>    ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
<4>hda: IC25N020ATCX04-0, ATA DISK drive
<4>Using anticipatory io scheduler
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>hdc: LG CD-ROM CRN-8245B, ATAPI CD/DVD-ROM drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>hda: max request size: 128KiB
<6>hda: 39070080 sectors (20003 MB) w/1768KiB Cache, CHS=38760/16/63, UDMA(100)
<6> hda: hda1 hda2
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>input: PS/2 Generic Mouse on isa0060/serio1
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>input: AT Translated Set 2 keyboard on isa0060/serio0
<6>NET: Registered protocol family 2
<6>IP: routing cache hash table of 512 buckets, 4Kbytes
<6>TCP: Hash tables configured (established 8192 bind 16384)
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 8
<6>NET: Registered protocol family 20
<4>Resume Machine: resuming from /dev/hda2
<4>Resuming from device unknown-block(3,2)
<3>Resume Machine: This is normal swap space
<6>ACPI: (supports S0 S3 S4 S5)
<6>kjournald starting.  Commit interval 5 seconds
<6>EXT3-fs: hda1: orphan cleanup on readonly fs
<7>ext3_orphan_cleanup: deleting unreferenced inode 293197
<7>ext3_orphan_cleanup: deleting unreferenced inode 293193
<6>EXT3-fs: hda1: 2 orphan inodes deleted
<6>EXT3-fs: recovery complete.
<6>EXT3-fs: mounted filesystem with ordered data mode.
<4>VFS: Mounted root (ext3 filesystem) readonly.
<6>Freeing unused kernel memory: 168k freed
<6>EXT3 FS on hda1, internal journal
<6>Adding 257032k swap on /dev/hda2.  Priority:42 extents:1
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Wed Oct 27 10:09:34 2004

Master Resource Control: previous runlevel: N, switching to runlevel: 3
<notice>start services (random isdn hotplug)
Hotplug is already active  (disable with  NOHOTPLUG=1 at the boot prompt)done
Initializing random number generatordone
<notice>exit status of (random isdn hotplug) is (0 0 0)
<notice>start services (coldplug)
coldplug scanning input: ***done
         scanning pci: *******.*WW**W*done
         scanning usb: done
         .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .done
<notice>exit status of (coldplug) is (0)
<notice>start services (pcmcia)
Starting PCMCIA <notice>startproc: execve (/sbin/cardmgr) [ /sbin/cardmgr ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=24 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=37 SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/sbin/cardmgr ]
done
<notice>exit status of (pcmcia) is (0)
<notice>start services (network)
Setting up network interfaces:
    lo       
    lo        IP address: 127.0.0.1/8   
done    eth0      device: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 41)
    eth0      configuration: eth-id-00:d0:59:33:6e:e0
    eth0      IP address: 10.0.10.5/16   
done    eth1      device: Xircom Cardbus Ethernet 10/100 (rev 03)
    eth1      configuration: eth-id-00:10:a4:e5:7e:ae
    eth1      IP address: 10.128.207.224/16   
doneSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .done
<notice>exit status of (network) is (0)
<notice>start services (syslog)
Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd -a /var/lib/ntp/dev/log ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=26 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=37 SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=26 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=37 SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
<notice>exit status of (syslog) is (0)
<notice>start services (smbfs)
Mount SMB/ CIFS File Systems unused
<notice>exit status of (smbfs) is (6)
<notice>start services (splash_early resmgr portmap)
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=28 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=37 SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=28 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=37 SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/sbin/portmap ]
Starting resource managerdone
Starting RPC portmap daemondone
<notice>exit status of (splash_early resmgr portmap) is (0 0 0)
<notice>start services (nfsboot)
Starting nfsboot (sm-notify) done
<notice>exit status of (nfsboot) is (0)
<notice>start services (sshd running-kernel powersaved fbset alsasound)
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=32 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=37 SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting SSH daemondone
Starting sound driver:  intel8x0FATAL: Module snd_intel8x0 not found.
failed
<notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -e /etc/powersave.conf -a resmgr -v 3 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=32 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=37 SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/powersaved ]
loading ACPI modules (ac battery button fan processor thermal ) Starting powersaved done
<notice>exit status of (sshd running-kernel powersaved fbset alsasound) is (0 0 0 0 0)
<notice>start services (splash postfix kbd cups)
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=37 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=37 SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
Starting cupsddone
Starting mail service (Postfix)done
Loading keymap qwerty/us.map.gz
doneLoading compose table winkeys shiftctrl latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu  -m trivial (K
done<notice>exit status of (splash postfix kbd cups) is (5 0 0 0)
<notice>start services (nscd hwscan cron)
Starting hardware scan on boot<notice><notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=41 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=37 SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=41 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=37 SHLVL=2 splash=silent sscripts=44 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting Name Service Cache Daemondone
Starting CRON daemondone
<notice>exit status of (nscd hwscan cron) is (0 0 0)
<notice>start services (splash_late)
<notice>exit status of (splash_late) is (0)
Master Resource Control: runlevel 3 has been reached
Skipped services in runlevel 3: smbfs splash
<notice>killproc: kill(958,3)

Boot logging started on /dev/tty1(/dev/console) at Wed Oct 27 10:28:06 2004

Master Resource Control: previous runlevel: 3, switching to runlevel: 6
<notice>stop services (splash_late)
<notice>exit status of (splash_late) is (0)
<notice>stop services (nscd hwscan cron)
<notice>killproc: kill(8350,15)
<notice>killproc: kill(8330,15)
Shutting down CRON daemondone
Shutting down Name Service Cache Daemondone
<notice>exit status of (nscd hwscan cron) is (0 0 0)
<notice>stop services (splash postfix cups)
<notice>killproc: kill(5103,15)
<notice>killproc: kill(2720,15)
Shutting down mail service (Postfix)done
Shutting down cupsddone
<notice>exit status of (splash postfix cups) is (5 0 0)
<notice>stop services (sshd running-kernel powersaved fbset alsasound)
<notice>killproc: kill(2645,15)
<notice>killproc: kill(2635,15)
Shutting down sound driverdone
Shutting down powersaved done
Unloading ACPI modules () done
Shutting down SSH daemondone
<notice>exit status of (sshd running-kernel powersaved fbset alsasound) is (0 0 0 0 0)
<notice>stop services (nfsboot)
<notice>exit status of (nfsboot) is (0)
<notice>stop services (splash_early resmgr portmap)
Shutting down resource managerdone
Shutting down RPC portmap daemon<notice>killproc: kill(2485,15)
done
<notice>exit status of (splash_early resmgr portmap) is (0 0 0)
<notice>stop services (smbfs)
Umount SMB/ CIFS File Systems done
<notice>exit status of (smbfs) is (0)
<notice>stop services (syslog)
Shutting down syslog services<notice>killproc: kill(2413,15)
<notice>killproc: kill(2410,15)
done
<notice>exit status of (syslog) is (0)
<notice>stop services (network)
Shutting down network interfaces:
    eth0      device: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 41)
    eth0      configuration: eth-id-00:d0:59:33:6e:e0
done    eth1      device: Xircom Cardbus Ethernet 10/100 (rev 03)
    eth1      configuration: eth-id-00:10:a4:e5:7e:ae
doneShutting down service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .done
<notice>exit status of (network) is (0)
<notice>stop services (pcmcia)
Shutting down PCMCIA <notice>checkproc: /sbin/cardmgr 1856
<notice>killproc: kill(1856,15)
cardmgr[1856]: exiting

done
<notice>exit status of (pcmcia) is (0)
<notice>stop services (coldplug)
done
<notice>exit status of (coldplug) is (0)
<notice>stop services (random isdn hotplug)
Saving random seeddone
disabling Hotplug done
Unloading ISDN driver done
<notice>exit status of (random isdn hotplug) is (0 0 0)
<notice>start services (reboot)
Running /etc/init.d/halt.local
done<notice>killproc: kill(9892,3)
Sending all processes the TERM signal...