|
|
|
|
|
|
|
|
|
|
xen-devel
[Xen-devel] brctl issues...
Ok, lets see if I can describe this well enough...
when I run brctl addif xen-bro vif1.0 it fails with the following...
vhost1:~# brctl addif xen-br0 vif56.0
can't add vif56.0 to bridge xen-br0: Cannot assign requested address
ifconfig dumps...
vhost1:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:50:8D:4F:33:D7
inet6 addr: fe80::250:8dff:fe4f:33d7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2088696 errors:0 dropped:848 overruns:0 frame:0
TX packets:2179062 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1703264248 (1.5 GiB) TX bytes:1955226623 (1.8 GiB)
Interrupt:23 Base address:0xe400
eth1 Link encap:Ethernet HWaddr 00:60:97:B6:7D:4A
inet6 addr: fe80::260:97ff:feb6:7d4a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5728 errors:0 dropped:0 overruns:0 frame:0
TX packets:2538 errors:0 dropped:0 overruns:0 carrier:0
collisions:3 txqueuelen:1000
RX bytes:1721585 (1.6 MiB) TX bytes:653564 (638.2 KiB)
Interrupt:17 Base address:0xd000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:73036 errors:0 dropped:0 overruns:0 frame:0
TX packets:73036 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:59921375 (57.1 MiB) TX bytes:59921375 (57.1 MiB)
vif56.0 Link encap:Ethernet HWaddr 01:00:10:00:01:92
inet6 addr: fe80::300:10ff:fe00:192/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:2 errors:0 dropped:3 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2360 (2.3 KiB) TX bytes:140 (140.0 b)
vif56.1 Link encap:Ethernet HWaddr 01:00:01:00:01:92
inet6 addr: fe80::300:1ff:fe00:192/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:5 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2360 (2.3 KiB) TX bytes:0 (0.0 b)
xen-br0 Link encap:Ethernet HWaddr 00:50:8D:4F:33:D7
inet addr:10.11.0.32 Bcast:10.11.255.255 Mask:255.255.0.0
inet6 addr: fe80::250:8dff:fe4f:33d7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:253950 errors:0 dropped:0 overruns:0 frame:0
TX packets:307125 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:41502095 (39.5 MiB) TX bytes:105782488 (100.8 MiB)
xen-br1 Link encap:Ethernet HWaddr 00:60:97:B6:7D:4A
inet addr:10.0.1.32 Bcast:10.255.255.255 Mask:255.255.254.0
inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4206 errors:0 dropped:0 overruns:0 frame:0
TX packets:1613 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:607414 (593.1 KiB) TX bytes:144808 (141.4 KiB)
The funny thing is, a little bit ago it was working just fine. Stock
network script wrappered with the following to setup the bridges...
I've rebooted, restored the original scripts, reinstalled the kernel
that was working, reinstalled xen from the same debs...
Any ideas why brctl would suddenly be unable to add the vifs to the
bridges?
*boggled*
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Xen-devel] brctl issues...,
Brian Wolfe <=
|
|
|
|
|