Keir Fraser wrote:
xen-0 dmesg: ... PCI: Using configuration type Xen Linux Plug and Play Support
v0.97 (c) Adam Belay pnp: the driver
'system' has been registered PCI: System does not support PCI PCI: System does
not support PCI ...
There is your problem. For some reason the kernel is deciding that your machine
is not PCI-capable.
*grmbl* i really did not notice that %-}
Rather unhelpfully, the kernel can print that message in three different places. The files concerned are:
linux-2.6.8.1-xen0/arch/xen/i386/pci/irq.c linux-2.6.8.1-xen0/arch/xen/i386/pci/legacy.c
linux-2.6.8.1-xen0/arch/xen/i386/pci/common.c
You may want to edit the print statements to distinguish them, so that we can
see which one(s) are actually being
triggered.
It looks like maybe raw_pci_ops == NULL, even though that should be impossible!
At the same time the kernel prints
'Using configuration type Xen' it should set raw_pci_ops to a non-NULL value.
here we go:
--- linux-2.6.8.1-xen-sparse/arch/xen/i386/pci/direct.c.orig 2004-10-08
15:38:04.170446555 +0200
+++ linux-2.6.8.1-xen-sparse/arch/xen/i386/pci/direct.c 2004-10-07
18:18:03.000000000 +0200
@@ -75,7 +75,7 @@
static int __init pci_direct_init(void)
{
- printk(KERN_INFO "PCI: Using configuration type Xen\n");
+ printk(KERN_INFO "PCI: Using configuration type Xen - raw_pci_ops =
&pci_direct_xen is '%p'\n",&pci_direct_xen);
raw_pci_ops = &pci_direct_xen;
return 0;
}
says: PCI: Using configuration type Xen - raw_pci_ops = &pci_direct_xen is
'c0349b40'
----------------------------------------------------------------------------------------------------
--- arch/i386/pci/pcbios.c.orig 2004-10-08 15:34:01.782322532 +0200
+++ arch/i386/pci/pcbios.c 2004-10-08 14:36:49.918527521 +0200
@@ -478,7 +478,10 @@
&& ((raw_pci_ops = pci_find_bios()))) {
pci_probe |= PCI_BIOS_SORT;
pci_bios_present = 1;
+ printk(KERN_INFO "XR: (pcbios.c::pci_pcbios_init) pci bios 'present'
here! raw_pci_ops: %p pci_probe %x\n",
+ raw_pci_ops,pci_probe);
} else {
+ printk(KERN_INFO "XR: (pcbios.c::pci_pcbios_init) pci bios 'ABSENT'
here!");
}
return 0;
}
says : XR: (pcbios.c::pci_pcbios_init) pci bios 'ABSENT' here!
----------------------------------------------------------------------------------------------------
finally:
XR: PCI: System does not support PCI (from legacy.c)
XR: PCI: System does not support PCI (from common.c)
----------------------------------------------------------------------------------------------------
the full output is attached again. this time it was on a different machine with
/lib/tls still in place
but normally i ran it with thread local storage disabled. i'd like to debug
this further for/with you
if needed but i can not get back to you before october 19th.
happy hacking.... :)
...Frank
__ __ ____ ___ _ _
\ \/ /___ _ __ |___ \ / _ \ | |__ ___| |_ __ _
\ // _ \ '_ \ __) || | | |__| '_ \ / _ \ __/ _` |
/ \ __/ | | | / __/ | |_| |__| |_) | __/ || (_| |
/_/\_\___|_| |_| |_____(_)___/ |_.__/ \___|\__\__,_|
http://www.cl.cam.ac.uk/netos/xen
University of Cambridge Computer Laboratory
Xen version 2.0-beta (root@xxxxxxxxxxxxxx) (gcc version 3.4.1 (Mandrakelinux
(Alpha 3.4.1-3mdk)) Thu Oct 7 16:34:10 CEST 2004
(XEN) Initialised 502MB memory (128752 pages) on a 502MB machine
(XEN) Xen heap size is 10784KB
(XEN) CPU0: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0
(XEN) CPU#0: Physical ID: 0, Logical ID: 0
(XEN) CPU caps: bfebfbff 00000000 00000000 00000000
(XEN) ACPI: RSDP (v000 PTLTD ) @ 0x000f7c50
(XEN) ACPI: RSDT (v001 PTLTD RSDT 0x06040001 LTP 0x00000000) @ 0x1f6f757c
(XEN) ACPI: FADT (v001 FSC D156x 0x06040001 0x000f4240) @ 0x1f6f75ac
(XEN) ACPI: MADT (v001 FSC APIC 0x06040001 CSF 0x00000000) @ 0x1f6faf76
(XEN) ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040001 LTP 0x00000001) @ 0x1f6fafd8
(XEN) ACPI: DSDT (v001 FSC D156x 0x06040001 MSFT 0x0100000e) @ 0x00000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 Pentium 4(tm) XEON(tm) APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
(XEN) Processor #1 Pentium 4(tm) XEON(tm) APIC version 20
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
(XEN) Using scheduler: Borrowed Virtual Time (bvt)
(XEN) Initializing CPU#0
(XEN) Detected 2394.075 MHz processor.
(XEN) Found and enabled local APIC!
(XEN) CPU0: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0
(XEN) CPU#0: Physical ID: 0, Logical ID: 0
(XEN) CPU caps: bfebfbff 00000000 00000000 00000000
(XEN) CPU0 booted
(XEN) SMP motherboard not detected.
(XEN) enabled ExtINT on CPU#0
(XEN) ESR value before enabling vector: 00000000
(XEN) ESR value after enabling vector: 00000000
(XEN) Using local APIC timer interrupts.
(XEN) Calibrating APIC timer for CPU0...
(XEN) ..... CPU speed is 2394.0204 MHz.
(XEN) ..... Bus speed is 199.5015 MHz.
(XEN) ..... bus_scale = 0x0000CC4F
(XEN) Time init:
(XEN) .... System Time: 12132865ns
(XEN) .... cpu_freq: 00000000:8EB2AFA0
(XEN) .... scale: 00000001:ABB8FC4B
(XEN) .... Wall Clock: 1097248978s 30000us
(XEN) PCI: PCI BIOS revision 2.10 entry at 0xfd987, last bus=3
(XEN) PCI: Using configuration type 1
(XEN) PCI: Probing PCI hardware
(XEN) PCI: Probing PCI hardware (bus 00)
(XEN) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
(XEN) Transparent bridge - PCI device 8086:244e
(XEN) PCI: Discovered primary peer bus 01 [IRQ]
(XEN) PCI: Using IRQ router PIIX/ICH [8086/24d0] at 00:1f.0
(XEN) PCI: Found IRQ 10 for device 00:1f.1
(XEN) PCI: Sharing IRQ 10 with 00:1d.2
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen-ELF header found:
'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=2.0,VIRT_BASE=0xC0000000,LOADER=generic,PT_MODE_WRITABLE'
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Kernel image: 02800000->02aa4e84
(XEN) Initrd image: 00000000->00000000
(XEN) Dom0 alloc.: 02c00000->0ac00000
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c0100000->c03d33dc
(XEN) Init. ramdisk: c03d4000->c03d4000
(XEN) Phys-Mach map: c03d4000->c03f4000
(XEN) Page tables: c03f4000->c03f7000
(XEN) Start info: c03f7000->c03f8000
(XEN) Boot stack: c03f8000->c03f9000
(XEN) TOTAL: c0000000->c0800000
(XEN) ENTRY ADDRESS: c0100000
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to
Xen).
Linux version 2.6.8.1-xen0 (root@il108) (gcc version 3.4.1 (Mandrakelinux
(Alpha 3.4.1-3mdk)) #2 Fri Oct 8 14:42:46 CEST 2004
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000008000000 (usable)
0MB HIGHMEM available.
128MB LOWMEM available.
On node 0 totalpages: 32768
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 28672 pages, LIFO batch:7
HighMem zone: 0 pages, LIFO batch:1
DMI not present.
Built 1 zonelists
Kernel command line: root=/dev/hda7 ro console=tty0 vga=ask
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Xen reported: 2394.075 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 126448k/131072k available (1839k kernel code, 4436k reserved, 715k
data, 112k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 4771.02 BogoMIPS
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: beebcbf1 00000000 00000000 00000080
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... disabled
NET: Registered protocol family 16
PCI: Using configuration type Xen - raw_pci_ops = &pci_direct_xen is 'c0349b40'
XR: (pcbios.c::pci_pcbios_init) pci bios 'ABSENT' here!<6>Linux Plug and Play
Support v0.97 (c) Adam Belay
pnp: the driver 'system' has been registered
XR: PCI: System does not support PCI (from legacy.c)
XR: PCI: System does not support PCI (from common.c)
audit: initializing netlink socket (disabled)
audit(1097248978.540:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Xen virtual console successfully installed as ttyS
Event-channel device installed.
Initialising Xen netif backend
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
pnp: the driver 'ide' has been registered
hda: SAMSUNG SP0411N, ATA DISK drive
hdc: HL-DT-STDVD-ROM GDR8162B, ATAPI CD/DVD-ROM drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 78242976 sectors (40060 MB) w/2048KiB Cache, CHS=16383/255/63
hda: hda1 hda4 < hda5 hda6 hda7 >
hdc: ATAPI 24X DVD-ROM drive, 256kB Cache
Uniform CD-ROM driver Revision: 3.20
mice: PS/2 mouse device common for all mice
input: PC Speaker
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 17
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 112k freed
***************************************************************
***************************************************************
** WARNING: Currently emulating unsupported memory accesses **
** in /lib/tls libraries. The emulation is very **
** slow, and may not work correctly with all **
** programs (e.g., some may 'Segmentation fault'). **
** TO ENSURE FULL PERFORMANCE AND CORRECT FUNCTION, **
** YOU MUST EXECUTE THE FOLLOWING AS ROOT: **
** mv /lib/tls /lib/tls.disabled **
***************************************************************
***************************************************************
Pausing... 5Pausing... 4Pausing...
3Pausing... 2Pausing... 1Continuing...
Generic RTC Driver v1.07
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
EXT3 FS on hda7, internal journal
Adding 2104504k swap on /dev/hda1. Priority:-1 extents:1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
e100: Intel(R) PRO/100 Network Driver, 3.0.18
e100: Copyright(c) 1999-2004 Intel Corporation
SCSI subsystem initialized
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
ioperm not fully supported - set iopl to 3
ioperm not fully supported - ignore resource release
ioperm not fully supported - ignore resource release
ioperm not fully supported - set iopl to 3
ioperm not fully supported - ignore resource release
ioperm not fully supported - ignore resource release
ioperm not fully supported - set iopl to 3
ioperm not fully supported - ignore resource release
ioperm not fully supported - ignore resource release
|
Home