| |
|
 |
|
 |
|
|
|
| |
|
|
xen-devel
Re: [Xen-devel] Dom1 always does DHCP requests and vmid increasing
Mike Brady wrote:
I don't have tcpdump installed at the moment, but will do so shortly.
In the mean time I have been playing around a bit and have found the
following.
1) Putting an ip=192.168.42.36 on the config file stops the DHCP request, but
the domain still has two addresses - the 192.168.42.36 and 192.168.42.35
(this is what is on the ifcfg-eth0 file).
2) In looking at the create.py script (after a crash course in Python :-) I
noticed that the 1.2.3.4 address is actually assigned as the nfsserver
address, not the IP address. To test this I set the nfs_server variable to
'169.254.1.0' and now this address shows up in the DHCP server log. The log
entry is below.
Jul 28 20:49:22 spitfire dhcpd: DHCPREQUEST for 255.255.255.255 (169.254.1.0)
from aa:00:00:00:00:11 via eth0: wrong network.
Jul 28 20:49:22 spitfire dhcpd: DHCPNAK on 255.255.255.255 to
aa:00:00:00:00:11 via eth0
Jul 28 20:49:24 spitfire dhcpd: DHCPDISCOVER from aa:00:00:00:00:11 via eth0
Jul 28 20:49:25 spitfire dhcpd: DHCPOFFER on 192.168.42.96 to
aa:00:00:00:00:11 via eth0
Jul 28 20:49:25 spitfire dhcpd: DHCPREQUEST for 192.168.42.96 (192.168.42.51)
from aa:00:00:00:00:11 via eth0
Jul 28 20:49:25 spitfire dhcpd: DHCPACK on 192.168.42.96 to aa:00:00:00:00:11
via eth0
I am still looking at the xm code to try and understand it.
xm just assembles the components of the ip= parameter to the kernel.
If you use 'xm create -n' it will print out the resulting configuration
and you will be able to see the kernel ip parameter it will use.
The ip= param to the kernel has the format
ip=ipaddr:nfsserver:gateway:hostname:interface:dhcpmode
and xm defaults it to
ip=:1.2.3.4:::eth0:off
which has DHCP off. So it's a double puzzle, why does the kernel
use dhcp when it's set off, and why is it using dhcp for the
nfs server address anyway?
If the DHCP requests are a problem for you I could add a
parameter to xm create to tell it not to set the ip= param
at all.
Mike
-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on
Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now,
one more big change to announce. We are now OSTG- Open Source Technology
Group. Come see the changes on the new OSTG site. www.ostg.com
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel
|
|
|
| |
|
Home