yeah, I found the typo in the grub.conf. But actually I just used it with
1.2, and worked fine.
I'll change it anyway.
I checked the ethernet card is e100, which is not set in .config, so just
set 'CONFIG_E100=y',right?
but I have question about 'make dep' and 'make dist'. It's done under
/xeno-unstable.bk, not under
/xeno-unstable.bk/linux-2.4.26-xen,right? But after I did it, it still
doesn't work.
I found 'make dist' only build xen and tools, didn't use .config,so I guess
the change isn't effective.
And with 'make world', it change back to the original .config, so no use
either.
So I guess maybe I should try set 'CONFIG_E100=y' in .config, and
make linux_xenU_config
make linux_xenU
make linux_xen0_config
make linux_xen0
Is the guess right?
Sorry for your time, coz I'm working remote now, if screw it again, then I
cannot login. So better make sure how to deal it.
Thanks,
Yan
----- Original Message -----
From: "Ian Pratt" <Ian.Pratt@xxxxxxxxxxxx>
To: "Yan Li" <yan_li00@xxxxxxxxxxx>
Cc: <xen-devel@xxxxxxxxxxxxxxxxxxxxx>; <Ian.Pratt@xxxxxxxxxxxx>
Sent: Saturday, June 26, 2004 1:31 AM
Subject: Re: [Xen-devel] Xen-Unstable : no eth0 when boot up
>
> > I used to use xen 1.2,and it worked fine. Now I wanna to try out the xen
gdb
> > debug stub, so switched to xen-unstable.
> >
> > I just 'make world' and 'make install', according to the README.And the
grub
> > configure is like:
> >
> > title Xen_1.3 / XenoLinux_1.3 2.4.26
> > kernel /xen.gz dom0_mem=131072 com1=115200 8n1 noht
> > module /vmlinuz-2.4.26-xen0 root=/dev/hda5 ro concole=tty0 3
>
> There should be a comma in the "com1=115200,8n1".
>
> Also, you probably don't need the "console=tty0" (in which you
> have a typo anyway).
>
> > But when booting up, it doesn't have network connection. Only has
localhost
> > domain name and 127.0.0.1 address.
>
> What Ethernet card do you have in the machine (i.e. what's the
> name of the driver you use under Linux)? It's possible that the
> default dom0 config currently doesn't include it, though we tried
> to include most popular cards.
>
> You can enable it in the normal way by going into
> linux-2.4.26-xen0 and editing .config and then doing a "make dep"
> "make dist".
>
> Ian
>
>
> -------------------------------------------------------
> This SF.Net email sponsored by Black Hat Briefings & Training.
> Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
> digital self defense, top technical experts, no vendor pitches,
> unmatched networking opportunities. Visit www.blackhat.com
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.sourceforge.net/lists/listinfo/xen-devel
>
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel
|
Home