Mmmm - nope.
It is getting further, but it isn't making it up. I've pasted from the
point it made it to prior to your fix.
My previous offer still stands.
keyboard: Timeout - AT keyboard not present?(ed)
keyboard: Timeout - AT keyboard not present?(f4)
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 5.2.30.1-k1
Copyright (c) 1999-2004 Intel Corporation.
tg3.c:v2.9 (March 8, 2004)
PCI: Obtained IRQ 27 for device 02:03.0
eth0: Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:66MHz:32-bit)
10/100/1000BaseT Ethernet 00:50:45:01:03:3a
PCI: Obtained IRQ 27 for device 02:04.0
eth1: Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:66MHz:32-bit)
10/100/1000BaseT Ethernet 00:50:45:01:03:3b
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
AMD8111: IDE controller at PCI slot 00:07.1
AMD8111: chipset revision 3
AMD8111: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
AMD8111: 00:07.1 (rev 03) UDMA133 controller
ide0: BM-DMA at 0x1020-0x1027, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1028-0x102f, BIOS settings: hdc:DMA, hdd:pio
hda: C/H/S=0/0/0 from BIOS ignored
(XEN) (file=irq.c, line=1017) Cannot bind IRQ 12 to guest. In use by
'PS/2 Mouse'.
(XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 12
(error=-16)
(XEN) (file=irq.c, line=1017) Cannot bind IRQ 4 to guest. In use by
'serial'.
(XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 4
(error=-16)
(XEN) (file=irq.c, line=1017) Cannot bind IRQ 2 to guest. In use by
'cascade'.
(XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 2
(error=-16)
(XEN) (file=irq.c, line=1017) Cannot bind IRQ 1 to guest. In use by
'keyboard'.
(XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 1
(error=-16)
(XEN) (file=irq.c, line=1017) Cannot bind IRQ 12 to guest. In use by
'PS/2 Mouse'.
(XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 12
(error=-16)
(XEN) (file=irq.c, line=1017) Cannot bind IRQ 4 to guest. In use by
'serial'.
(XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 4
(error=-16)
(XEN) (file=irq.c, line=1017) Cannot bind IRQ 2 to guest. In use by
'cascade'.
(XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 2
(error=-16)
(XEN) (file=irq.c, line=1017) Cannot bind IRQ 1 to guest. In use by
'keyboard'.
(XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 1
(error=-16)
hda: ST340014A, ATA DISK drive
(XEN) (file=irq.c, line=1017) Cannot bind IRQ 12 to guest. In use by
'PS/2 Mouse'.
(XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 12
(error=-16)
(XEN) (file=irq.c, line=1017) Cannot bind IRQ 4 to guest. In use by
'serial'.
(XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 4
(error=-16)
(XEN) (file=irq.c, line=1017) Cannot bind IRQ 2 to guest. In use by
'cascade'.
(XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 2
(error=-16)
(XEN) (file=irq.c, line=1017) Cannot bind IRQ 1 to guest. In use by
'keyboard'.
(XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 1
(error=-16)
(XEN) (file=irq.c, line=1017) Cannot bind IRQ 12 to guest. In use by
'PS/2 Mouse'.
(XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 12
(error=-16)
(XEN) (file=irq.c, line=1017) Cannot bind IRQ 4 to guest. In use by
'serial'.
(XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 4
(error=-16)
(XEN) (file=irq.c, line=1017) Cannot bind IRQ 2 to guest. In use by
'cascade'.
(XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 2
(error=-16)
(XEN) (file=irq.c, line=1017) Cannot bind IRQ 1 to guest. In use by
'keyboard'.
(XEN) (file=event_channel.c, line=205) Couldn't bind to PIRQ 1
(error=-16)
hdc: SR244W, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63,
UDMA(100)
hdc: attached ide-cdrom driver.
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2 hda3
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
ip_conntrack version 2.1 (2048 buckets, 16384 max) - 288 bytes per
conntrack
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
root_device_name = hda3
kjournald starting. Commit interval 5 seconds
(XEN) Assertion 'entry->next->prev == entry' failed, line 92, file
/x/eng/raidant/bk/xeno-unstable-latest/xen/include/xen/list.hCPU: 0
(XEN) EIP: 0808:[<fc51564a>]
(XEN) EFLAGS: 00211046
(XEN) eax: 00002fcc ebx: fc590d84 ecx: 0000002f edx: 00000000
(XEN) esi: fc590d40 edi: 00000000 ebp: 02eadc06 esp: fc503ed8
(XEN) ds: 0810 es: 0810 fs: 0810 gs: 0810 ss: 0810
(XEN) Stack trace from ESP=fc503ed8:
(XEN) fc530c80 fc53380b 0000005c fc530ee0 d632908d 00000003 d63290f6 00000003
(XEN) 00000000 00000000 fc590d40 fc590d40 fc596000 fc574754 00687abe
00000000
(XEN) d632908d 00000003 00000000 d6328ed0 00000003 00000000 fc590d40
[fc515ff8]
(XEN) fc503f68 d6328ed0 00000003 c00b67df d9e94efe 00000003 c12cf8c0
fc575120
(XEN) 00000000 00000003 00000003 00000000 d6328be6 00000003 00000001
fc596000
(XEN) fc574754 00000000 00201292 fc590d40 00000000 00000008 c0202000
[fc515ec5]
(XEN) fc590d40 c0203f40 c1366000 fc590d40 fc590d40 fc590d40 c0202000
[fc521ce5]
(XEN) 00000001 d34de780 d2b55100 c0202000 00000008 c0202000 00000008
00000821
(XEN) 00000821 00000821 00000821 00000008 c00b3178 00000819 00201246
c0203fd8
(XEN) 00000821 fc590d40
(XEN) Call Trace from ESP=fc503ed8: [<fc515ff8>] [<fc515ec5>]
[<fc521ce5>]
On Mon, 31 May 2004, Keir Fraser wrote:
>
> Hopefully fixed now.
>
> -- Keir
>
>
> > FYI:
> > I reverted to 1.915 on the off-chance that the bug is a result of recent
> > scheduler changes not playing well on SMP. The machine is up and running
> > again.
> >
> >
> > -Kip
> >
>
>
-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g.
Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel
|
Home