/O APIC #6 Version 17 at 0xFEC01000. Enabling APIC mode: Flat. Using 2 I/O APICs Processors: 5 Kernel command line: root=/dev/ram0 rw init=/linuxrc mem=3940352K Initializing CPU#0 Detected 550.084 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1097.72 BogoMIPS Memory: 901288k/917504k available (2832k kernel code, 15824k reserved, 947k data, 392k init, 0k highmem) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode cache hash table entries: 65536 (order: 7, 524288 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 1024K CPU serial number disabled. Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 1024K Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU0: Intel Pentium III (Katmai) stepping 03 per-CPU timeslice cutoff: 2925.11 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/0 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 1097.72 BogoMIPS CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 1024K CPU serial number disabled. Intel machine check reporting enabled on CPU#1. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU1: Intel Pentium III (Katmai) stepping 03 Booting processor 2/1 eip 2000 Initializing CPU#2 masked ExtINT on CPU#2 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 1097.72 BogoMIPS CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 1024K CPU serial number disabled. Intel machine check reporting enabled on CPU#2. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU2: Intel Pentium III (Katmai) stepping 03 Booting processor 3/2 eip 2000 Initializing CPU#3 masked ExtINT on CPU#3 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 1097.72 BogoMIPS CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 1024K CPU serial number disabled. Intel machine check reporting enabled on CPU#3. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU3: Intel Pentium III (Katmai) stepping 03 Booting processor 4/4 eip 2000 Initializing CPU#4 masked ExtINT on CPU#4 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 1097.72 BogoMIPS CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 1024K CPU serial number disabled. Intel machine check reporting enabled on CPU#4. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU4: Intel Pentium III (Katmai) stepping 03 Total of 5 processors activated (5488.64 BogoMIPS). ENABLING IO-APIC IRQs Setting 3 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 3 ... ok. Setting 6 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 6 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 3-0, 6-3, 6-13, 6-14, 6-15 not connected. ..TIMER: vector=0x31 pin1=-1 pin2=0 ...trying to set up timer (IRQ0) through the 8259A ... ..... (found pin 0) ...works. number of MP IRQ sources: 40. number of IO-APIC #3 registers: 16. number of IO-APIC #6 registers: 16. testing the IO APIC....................... IO APIC #3...... .... register #00: 03000000 ....... : physical APIC id: 03 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 01F 0F 0 0 0 0 0 1 1 31 01 01F 0F 0 0 0 0 0 1 1 39 02 000 00 1 0 0 0 0 0 0 00 03 01F 0F 0 0 0 0 0 1 1 41 04 01F 0F 0 0 0 0 0 1 1 49 05 01F 0F 1 1 0 1 0 1 1 51 06 01F 0F 0 0 0 0 0 1 1 59 07 01F 0F 0 0 0 0 0 1 1 61 08 01F 0F 0 0 0 0 0 1 1 69 09 01F 0F 1 1 0 1 0 1 1 71 0a 01F 0F 1 1 0 1 0 1 1 79 0b 01F 0F 1 1 0 1 0 1 1 81 0c 01F 0F 0 0 0 0 0 1 1 89 0d 01F 0F 0 0 0 0 0 1 1 91 0e 01F 0F 0 0 0 0 0 1 1 99 0f 01F 0F 0 0 0 0 0 1 1 A1 IO APIC #6...... .... register #00: 06000000 ....... : physical APIC id: 06 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 01000000 ....... : arbitration: 01 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 01F 0F 1 1 0 1 0 1 1 A9 01 01F 0F 1 1 0 1 0 1 1 B1 02 01F 0F 1 1 0 1 0 1 1 B9 03 000 00 1 0 0 0 0 0 0 00 04 01F 0F 1 1 0 1 0 1 1 C1 05 01F 0F 1 1 0 1 0 1 1 C9 06 01F 0F 1 1 0 1 0 1 1 D1 07 01F 0F 1 1 0 1 0 1 1 D9 08 01F 0F 1 1 0 1 0 1 1 E1 09 01F 0F 1 1 0 1 0 1 1 E9 0a 01F 0F 1 1 0 1 0 1 1 32 0b 01F 0F 1 1 0 1 0 1 1 3A 0c 01F 0F 1 1 0 1 0 1 1 42 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:0 IRQ1 -> 0:1 IRQ2 -> 0:2 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 1:0 IRQ17 -> 1:1 IRQ18 -> 1:2 IRQ20 -> 1:4 IRQ21 -> 1:5 IRQ22 -> 1:6 IRQ23 -> 1:7 IRQ24 -> 1:8 IRQ25 -> 1:9 IRQ26 -> 1:10 IRQ27 -> 1:11 IRQ28 -> 1:12 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 550.0540 MHz. ..... host bus clock speed is 100.0097 MHz. cpu: 0, clocks: 1000097, slice: 166682 CPU0 cpu: 1, clocks: 1000097, slice: 166682 cpu: 2, clocks: 1000097, slice: 166682 cpu: 3, clocks: 1000097, slice: 166682 cpu: 4, clocks: 1000097, slice: 166682 CPU2 CPU1 CPU3 CPU4 checking TSC synchronization across CPUs: passed. Waiting on wait_init_idle (map = 0x1e) All processors have done init_idle PCI: PCI BIOS revision 2.10 entry at 0xfd989, last bus=7 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Discovered primary peer bus 01 [IRQ] PCI: Discovered primary peer bus 04 [IRQ] PCI: Using IRQ router ServerWorks [1166/0200] at 00:0f.0 PCI->APIC IRQ transform: (B0,I6,P0) -> 18 PCI->APIC IRQ transform: (B4,I2,P0) -> 16 PCI->APIC IRQ transform: (B4,I2,P1) -> 17 PCI->APIC IRQ transform: (B4,I3,P0) -> 20 PCI->APIC IRQ transform: (B4,I6,P0) -> 21 PCI->APIC IRQ transform: (B5,I2,P0) -> 22 PCI->APIC IRQ transform: (B5,I3,P0) -> 24 PCI->APIC IRQ transform: (B5,I4,P0) -> 23 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Journalled Block Device driver loaded Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 5.1.13-k1 Copyright (c) 1999-2003 Intel Corporation. 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt 04:06.0: 3Com PCI 3c905C Tornado at 0x4800. Vers LK1.1.18-ac 00:50:da:07:d7:41, IRQ 21 product code 5957 rev 00.13 date 07-17-99 Internal config register is 1800000, transceivers 0xa. 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. MII transceiver found at address 24, status 782d. Enabling bus-master transmits and whole-frame receives. 04:06.0: scatter/gather enabled. h/w checksums enabled See Documentation/networking/vortex.txt 05:02.0: 3Com PCI 3c905C Tornado at 0x5000. Vers LK1.1.18-ac 00:50:da:4f:e5:01, IRQ 22 product code 5957 rev 00.13 date 12-23-99 Internal config register is 1800000, transceivers 0xa. 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. MII transceiver found at address 24, status 7809. Enabling bus-master transmits and whole-frame receives. 05:02.0: scatter/gather enabled. h/w checksums enabled See Documentation/networking/vortex.txt 05:03.0: 3Com PCI 3c905C Tornado at 0x5080. Vers LK1.1.18-ac 00:50:da:07:d8:29, IRQ 24 product code 5957 rev 00.13 date 07-17-99 Internal config register is 1800000, transceivers 0xa. 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. MII transceiver found at address 24, status 7809. Enabling bus-master transmits and whole-frame receives. 05:03.0: scatter/gather enabled. h/w checksums enabled See Documentation/networking/vortex.txt 05:04.0: 3Com PCI 3c905C Tornado at 0x5400. Vers LK1.1.18-ac 00:50:da:df:86:05, IRQ 23 product code 5957 rev 00.13 date 01-14-00 Internal config register is 1800000, transceivers 0xa. 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. MII transceiver found at address 24, status 782d. Enabling bus-master transmits and whole-frame receives. 05:04.0: scatter/gather enabled. h/w checksums enabled pcnet32.c:v1.27a 10.02.2002 tsbogend@xxxxxxxxxxxxxxxx Intel(R) PRO/100 Network Driver - version 2.3.18-k1 Copyright (c) 2003 Intel Corporation e100: selftest OK. e100: eth4: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled cpu cycle saver enabled No adapter found. Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 816M agpgart: no supported devices found. [drm] Initialized tdfx 1.0.0 20010216 on minor 0 [drm] Initialized radeon 1.1.1 20010405 on minor 1 [drm:drm_init] *ERROR* Cannot initialize the agpgart module. Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hda: CD-532E-B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: attached ide-cdrom driver. hda: ATAPI 32X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.12 SCSI subsystem driver Revision: 1.00 Red Hat/Adaptec aacraid driver (1.1.2 Sep 25 2003 16:31:15) megaraid: v1.18f (Release Date: Tue Dec 10 09:54:39 EST 2002) megaraid: found 0x8086:0x1960:idx 0:bus 4:slot 3:func 1 scsi0 : Found a MegaRAID controller at 0xf880f000, IRQ: 20 megaraid: [E :B ] detected 2 logical drives megaraid: channel[1] is raid. megaraid: channel[2] is raid. scsi0 : LSI Logic MegaRAID E 254 commands 15 targs 5 chans 7 luns scsi0: scanning virtual channel 0 for logical drives. Vendor: MegaRAID Model: LD0 RAID1 34730R Rev: E Type: Direct-Access ANSI SCSI revision: 02 Vendor: MegaRAID Model: LD1 RAID1 70086R Rev: E Type: Direct-Access ANSI SCSI revision: 02 scsi0: scanning physical channel 0 for devices. Vendor: HP Model: SAFTE; U160/M BP Rev: 1023 Type: Processor ANSI SCSI revision: 02 scsi0: scanning physical channel 1 for devices. Vendor: HP Model: SAFTE; U160/M BP Rev: 1023 Type: Processor ANSI SCSI revision: 02 3ware Storage Controller device driver for Linux v1.02.00.036. 3w-xxxx: No cards found. Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0 SCSI device sda: 71127040 512-byte hdwr sectors (36417 MB) Partition check: sda: sda1 sda2 sda3 sda4 < sda5 > SCSI device sdb: 143536128 512-byte hdwr sectors (73490 MB) sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 > Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] usb.c: registered new driver hub host/uhci.c: USB Universal Host Controller Interface driver v1.1 usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 1016.000 MB/sec 32regs : 518.000 MB/sec pIII_sse : 1100.000 MB/sec pII_mmx : 1220.400 MB/sec p5_mmx : 1280.800 MB/sec raid5: using function: pIII_sse (1100.000 MB/sec) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. LVM version 1.0.5+(22/07/2002) NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) ip_conntrack version 2.1 (7168 buckets, 57344 max) - 292 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. ds: no socket drivers loaded! RAMDISK: Compressed image found at block 0 Freeing initrd memory: 1274k freed VFS: Mounted root (ext2 filesystem). Freeing unused kernel memory: 392k freed ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A