# HG changeset patch
# User emellor@xxxxxxxxxxxxxxxxxxxxxx
# Node ID 809440d54834cd973d95e3033b893ade961d5e07
# Parent bdaa231489ab19b37d3689d2957fa2c59211374e
Loop retrying when ballooning out, even when the dom0-min-mem setting means
that there is not sufficient memory available at the moment. Memory may be
about to be freed up by the system after a domain destruction (i.e. the memory
is being scrubbed asynchronously, and will be released soon).
Closes bug #407, bug #429.
Signed-off-by: Ewan Mellor <ewan@xxxxxxxxxxxxx>
xen-unstable cset: 8e74f2cf985ed5ba10b11f9713ffe35be6ec2af5
committer: Robert Read <robert@xxxxxxxxxxxxx>
diff -r bdaa231489ab -r 809440d54834 tools/python/xen/xend/balloon.py
--- a/tools/python/xen/xend/balloon.py Thu Dec 8 04:10:22 2005
+++ b/tools/python/xen/xend/balloon.py Thu Dec 8 04:13:06 2005
@@ -30,52 +30,95 @@
PROC_XEN_BALLOON = "/proc/xen/balloon"
BALLOON_OUT_SLACK = 1 # MiB. We need this because the physinfo details are
# rounded.
+RETRY_LIMIT = 10
+##
+# The time to sleep between retries grows linearly, using this value (in
+# seconds). When the system is lightly loaded, memory should be scrubbed and
+# returned to the system very quickly, whereas when it is loaded, the system
+# needs idle time to get the scrubbing done. This linear growth accommodates
+# such requirements.
+SLEEP_TIME_GROWTH = 0.1
def free(required):
"""Balloon out memory from the privileged domain so that there is the
specified required amount (in KiB) free.
"""
-
+
+ # We check whether there is enough free memory, and if not, instruct dom0
+ # to balloon out to free some up. Memory freed by a destroyed domain may
+ # not appear in the free_memory field immediately, because it needs to be
+ # scrubbed before it can be released to the free list, which is done
+ # asynchronously by Xen; ballooning is asynchronous also. No matter where
+ # we expect the free memory to come from, therefore, we need to wait for
+ # it to become available.
+ #
+ # We are not allowed to balloon below dom0_min_mem, or if dom0_min_mem
+ # is 0, we cannot balloon at all. Memory can still become available
+ # through a rebooting domain, however.
+ #
+ # Eventually, we time out (presumably because there really isn't enough
+ # free memory).
+ #
+ # We don't want to set the memory target (triggering a watch) when that
+ # has already been done, but we do want to respond to changing memory
+ # usage, so we recheck the required alloc each time around the loop, but
+ # track the last used value so that we don't trigger too many watches.
+
+ need_mem = (required + 1023) / 1024 + BALLOON_OUT_SLACK
+
+ xroot = XendRoot.instance()
xc = xen.lowlevel.xc.xc()
- xroot = XendRoot.instance()
try:
- free_mem = xc.physinfo()['free_memory']
- need_mem = (required + 1023) / 1024 + BALLOON_OUT_SLACK
+ dom0_min_mem = xroot.get_dom0_min_mem()
- log.debug("Balloon: free %d; need %d.", free_mem, need_mem)
-
- if free_mem >= need_mem:
- return
+ retries = 0
+ sleep_time = SLEEP_TIME_GROWTH
+ last_new_alloc = None
+ while retries < RETRY_LIMIT:
+ free_mem = xc.physinfo()['free_memory']
- dom0_min_mem = xroot.get_dom0_min_mem()
+ if free_mem >= need_mem:
+ log.debug("Balloon: free %d; need %d; done.", free_mem,
+ need_mem)
+ return
+
+ if retries == 0:
+ log.debug("Balloon: free %d; need %d.", free_mem, need_mem)
+
+ if dom0_min_mem > 0:
+ dom0_alloc = _get_dom0_alloc()
+ new_alloc = dom0_alloc - (need_mem - free_mem)
+
+ if (new_alloc >= dom0_min_mem and
+ new_alloc != last_new_alloc):
+ log.debug("Balloon: setting dom0 target to %d.",
+ new_alloc)
+ dom0 = XendDomain.instance().privilegedDomain()
+ dom0.setMemoryTarget(new_alloc)
+ last_new_alloc = new_alloc
+ # Continue to retry, waiting for ballooning.
+
+ time.sleep(sleep_time)
+ retries += 1
+ sleep_time += SLEEP_TIME_GROWTH
+
+ # Not enough memory; diagnose the problem.
if dom0_min_mem == 0:
- raise VmError('Not enough free memory and dom0_min_mem is 0.')
-
- dom0_alloc = _get_dom0_alloc()
- dom0_new_alloc = dom0_alloc - (need_mem - free_mem)
- if dom0_new_alloc < dom0_min_mem:
+ raise VmError(('Not enough free memory and dom0_min_mem is 0, so '
+ 'I cannot release any more. I need %d MiB but '
+ 'only have %d.') %
+ (need_mem, free_mem))
+ elif new_alloc >= dom0_min_mem:
raise VmError(
('I need %d MiB, but dom0_min_mem is %d and shrinking to '
'%d MiB would leave only %d MiB free.') %
(need_mem, dom0_min_mem, dom0_min_mem,
- free_mem + (dom0_alloc - dom0_min_mem)))
+ free_mem + dom0_alloc - dom0_min_mem))
+ else:
+ raise VmError('The privileged domain did not balloon!')
- dom0 = XendDomain.instance().privilegedDomain()
- dom0.setMemoryTarget(dom0_new_alloc)
-
- timeout = 20 # 2 sec
- while timeout > 0:
- time.sleep(0.1)
-
- free_mem = xc.physinfo()['free_memory']
- if free_mem >= need_mem:
- return
-
- timeout -= 1
-
- raise VmError('The privileged domain did not balloon!')
finally:
del xc
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog
|
Home