ChangeSet 1.1901, 2005/06/13 14:17:02+01:00, iap10@xxxxxxxxxxxxxxxxxxxxx
Upgrade to linux patch 2.6.11.12
Signed-off-by: ian@xxxxxxxxxxxxx
b/patches/linux-2.6.11/linux-2.6.11.12.patch | 1979 +++++++++++++++++++++++++++
patches/linux-2.6.11/linux-2.6.11.11.patch | 1944 --------------------------
2 files changed, 1979 insertions(+), 1944 deletions(-)
diff -Nru a/patches/linux-2.6.11/linux-2.6.11.11.patch
b/patches/linux-2.6.11/linux-2.6.11.11.patch
--- a/patches/linux-2.6.11/linux-2.6.11.11.patch 2005-06-17 21:05:02
-04:00
+++ /dev/null Wed Dec 31 16:00:00 196900
@@ -1,2304 +0,0 @@
-diff --git a/Documentation/SecurityBugs b/Documentation/SecurityBugs
-new file mode 100644
---- /dev/null
-+++ b/Documentation/SecurityBugs
-@@ -0,0 +1,38 @@
-+Linux kernel developers take security very seriously. As such, we'd
-+like to know when a security bug is found so that it can be fixed and
-+disclosed as quickly as possible. Please report security bugs to the
-+Linux kernel security team.
-+
-+1) Contact
-+
-+The Linux kernel security team can be contacted by email at
-+<security@xxxxxxxxxx>. This is a private list of security officers
-+who will help verify the bug report and develop and release a fix.
-+It is possible that the security team will bring in extra help from
-+area maintainers to understand and fix the security vulnerability.
-+
-+As it is with any bug, the more information provided the easier it
-+will be to diagnose and fix. Please review the procedure outlined in
-+REPORTING-BUGS if you are unclear about what information is helpful.
-+Any exploit code is very helpful and will not be released without
-+consent from the reporter unless it has already been made public.
-+
-+2) Disclosure
-+
-+The goal of the Linux kernel security team is to work with the
-+bug submitter to bug resolution as well as disclosure. We prefer
-+to fully disclose the bug as soon as possible. It is reasonable to
-+delay disclosure when the bug or the fix is not yet fully understood,
-+the solution is not well-tested or for vendor coordination. However, we
-+expect these delays to be short, measurable in days, not weeks or months.
-+A disclosure date is negotiated by the security team working with the
-+bug submitter as well as vendors. However, the kernel security team
-+holds the final say when setting a disclosure date. The timeframe for
-+disclosure is from immediate (esp. if it's already publically known)
-+to a few weeks. As a basic default policy, we expect report date to
-+disclosure date to be on the order of 7 days.
-+
-+3) Non-disclosure agreements
-+
-+The Linux kernel security team is not a formal body and therefore unable
-+to enter any non-disclosure agreements.
-diff --git a/MAINTAINERS b/MAINTAINERS
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -1966,6 +1966,11 @@ M: christer@xxxxxxxxxxx
- W: http://www.weinigel.se
- S: Supported
-
-+SECURITY CONTACT
-+P: Security Officers
-+M: security@xxxxxxxxxx
-+S: Supported
-+
- SELINUX SECURITY MODULE
- P: Stephen Smalley
- M: sds@xxxxxxxxxxxxxx
-diff --git a/Makefile b/Makefile
---- a/Makefile
-+++ b/Makefile
-@@ -1,8 +1,8 @@
- VERSION = 2
- PATCHLEVEL = 6
- SUBLEVEL = 11
--EXTRAVERSION =
--NAME=Woozy Numbat
-+EXTRAVERSION = .11
-+NAME=Woozy Beaver
-
- # *DOCUMENTATION*
- # To see a list of typical targets execute "make help"
-diff --git a/REPORTING-BUGS b/REPORTING-BUGS
---- a/REPORTING-BUGS
-+++ b/REPORTING-BUGS
-@@ -16,6 +16,10 @@ code relevant to what you were doing. If
- describe how to recreate it. That is worth even more than the oops itself.
- The list of maintainers is in the MAINTAINERS file in this directory.
-
-+ If it is a security bug, please copy the Security Contact listed
-+in the MAINTAINERS file. They can help coordinate bugfix and disclosure.
-+See Documentation/SecurityBugs for more infomation.
-+
- If you are totally stumped as to whom to send the report, send it to
- linux-kernel@xxxxxxxxxxxxxxxx (For more information on the linux-kernel
- mailing list see http://www.tux.org/lkml/).
-diff --git a/arch/ia64/kernel/fsys.S b/arch/ia64/kernel/fsys.S
---- a/arch/ia64/kernel/fsys.S
-+++ b/arch/ia64/kernel/fsys.S
-@@ -611,8 +611,10 @@ GLOBAL_ENTRY(fsys_bubble_down)
- movl r2=ia64_ret_from_syscall
- ;;
- mov rp=r2 // set the real return addr
-- tbit.z p8,p0=r3,TIF_SYSCALL_TRACE
-+ and r3=_TIF_SYSCALL_TRACEAUDIT,r3
- ;;
-+ cmp.eq p8,p0=r3,r0
-+
- (p10) br.cond.spnt.many ia64_ret_from_syscall // p10==true means out
registers are more than 8
- (p8) br.call.sptk.many b6=b6 // ignore this return addr
- br.cond.sptk ia64_trace_syscall
-diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c
---- a/arch/ia64/kernel/signal.c
-+++ b/arch/ia64/kernel/signal.c
-@@ -224,7 +224,8 @@ ia64_rt_sigreturn (struct sigscratch *sc
- * could be corrupted.
- */
- retval = (long) &ia64_leave_kernel;
-- if (test_thread_flag(TIF_SYSCALL_TRACE))
-+ if (test_thread_flag(TIF_SYSCALL_TRACE)
-+ || test_thread_flag(TIF_SYSCALL_AUDIT))
- /*
- * strace expects to be notified after sigreturn returns even
though the
- * context to which we return may not be in the middle of a
syscall.
-diff --git a/arch/ppc/oprofile/op_model_fsl_booke.c
b/arch/ppc/oprofile/op_model_fsl_booke.c
---- a/arch/ppc/oprofile/op_model_fsl_booke.c
-+++ b/arch/ppc/oprofile/op_model_fsl_booke.c
-@@ -150,7 +150,6 @@ static void fsl_booke_handle_interrupt(s
- int is_kernel;
- int val;
- int i;
-- unsigned int cpu = smp_processor_id();
-
- /* set the PMM bit (see comment below) */
- mtmsr(mfmsr() | MSR_PMM);
-@@ -162,7 +161,7 @@ static void fsl_booke_handle_interrupt(s
- val = ctr_read(i);
- if (val < 0) {
- if (oprofile_running && ctr[i].enabled) {
-- oprofile_add_sample(pc, is_kernel, i, cpu);
-+ oprofile_add_pc(pc, is_kernel, i);
- ctr_write(i, reset_value[i]);
- } else {
- ctr_write(i, 0);
-diff --git a/arch/ppc/platforms/4xx/ebony.h b/arch/ppc/platforms/4xx/ebony.h
---- a/arch/ppc/platforms/4xx/ebony.h
-+++ b/arch/ppc/platforms/4xx/ebony.h
-@@ -61,8 +61,8 @@
- */
-
- /* OpenBIOS defined UART mappings, used before early_serial_setup */
--#define UART0_IO_BASE (u8 *) 0xE0000200
--#define UART1_IO_BASE (u8 *) 0xE0000300
-+#define UART0_IO_BASE 0xE0000200
-+#define UART1_IO_BASE 0xE0000300
-
- /* external Epson SG-615P */
- #define BASE_BAUD 691200
-diff --git a/arch/ppc/platforms/4xx/luan.h b/arch/ppc/platforms/4xx/luan.h
---- a/arch/ppc/platforms/4xx/luan.h
-+++ b/arch/ppc/platforms/4xx/luan.h
-@@ -47,9 +47,9 @@
- #define RS_TABLE_SIZE 3
-
- /* PIBS defined UART mappings, used before early_serial_setup */
--#define UART0_IO_BASE (u8 *) 0xa0000200
--#define UART1_IO_BASE (u8 *) 0xa0000300
--#define UART2_IO_BASE (u8 *) 0xa0000600
-+#define UART0_IO_BASE 0xa0000200
-+#define UART1_IO_BASE 0xa0000300
-+#define UART2_IO_BASE 0xa0000600
-
- #define BASE_BAUD 11059200
- #define STD_UART_OP(num) \
-diff --git a/arch/ppc/platforms/4xx/ocotea.h b/arch/ppc/platforms/4xx/ocotea.h
---- a/arch/ppc/platforms/4xx/ocotea.h
-+++ b/arch/ppc/platforms/4xx/ocotea.h
-@@ -56,8 +56,8 @@
- #define RS_TABLE_SIZE 2
-
- /* OpenBIOS defined UART mappings, used before early_serial_setup */
--#define UART0_IO_BASE (u8 *) 0xE0000200
--#define UART1_IO_BASE (u8 *) 0xE0000300
-+#define UART0_IO_BASE 0xE0000200
-+#define UART1_IO_BASE 0xE0000300
-
- #define BASE_BAUD 11059200/16
- #define STD_UART_OP(num) \
-diff --git a/arch/ppc64/kernel/pSeries_iommu.c
b/arch/ppc64/kernel/pSeries_iommu.c
---- a/arch/ppc64/kernel/pSeries_iommu.c
-+++ b/arch/ppc64/kernel/pSeries_iommu.c
-@@ -401,6 +401,8 @@ static void iommu_bus_setup_pSeriesLP(st
- struct device_node *dn, *pdn;
- unsigned int *dma_window = NULL;
-
-+ DBG("iommu_bus_setup_pSeriesLP, bus %p, bus->self %p\n", bus,
bus->self);
-+
- dn = pci_bus_to_OF_node(bus);
-
- /* Find nearest ibm,dma-window, walking up the device tree */
-@@ -455,6 +457,56 @@ static void iommu_dev_setup_pSeries(stru
- }
- }
-
-+static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev)
-+{
-+ struct device_node *pdn, *dn;
-+ struct iommu_table *tbl;
-+ int *dma_window = NULL;
-+
-+ DBG("iommu_dev_setup_pSeriesLP, dev %p (%s)\n", dev, dev->pretty_name);
-+
-+ /* dev setup for LPAR is a little tricky, since the device tree might
-+ * contain the dma-window properties per-device and not neccesarily
-+ * for the bus. So we need to search upwards in the tree until we
-+ * either hit a dma-window property, OR find a parent with a table
-+ * already allocated.
-+ */
-+ dn = pci_device_to_OF_node(dev);
-+
-+ for (pdn = dn; pdn && !pdn->iommu_table; pdn = pdn->parent) {
-+ dma_window = (unsigned int *)get_property(pdn,
"ibm,dma-window", NULL);
-+ if (dma_window)
-+ break;
-+ }
-+
-+ /* Check for parent == NULL so we don't try to setup the empty EADS
-+ * slots on POWER4 machines.
-+ */
-+ if (dma_window == NULL || pdn->parent == NULL) {
-+ /* Fall back to regular (non-LPAR) dev setup */
-+ DBG("No dma window for device, falling back to regular
setup\n");
-+ iommu_dev_setup_pSeries(dev);
-+ return;
-+ } else {
-+ DBG("Found DMA window, allocating table\n");
-+ }
-+
-+ if (!pdn->iommu_table) {
-+ /* iommu_table_setparms_lpar needs bussubno. */
-+ pdn->bussubno = pdn->phb->bus->number;
-+
-+ tbl = (struct iommu_table *)kmalloc(sizeof(struct iommu_table),
-+ GFP_KERNEL);
-+
-+ iommu_table_setparms_lpar(pdn->phb, pdn, tbl, dma_window);
-+
-+ pdn->iommu_table = iommu_init_table(tbl);
-+ }
-+
-+ if (pdn != dn)
-+ dn->iommu_table = pdn->iommu_table;
-+}
-+
- static void iommu_bus_setup_null(struct pci_bus *b) { }
- static void iommu_dev_setup_null(struct pci_dev *d) { }
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog
|
Home