http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=448
Summary: xen 3.0.0 crashing
Product: Xen
Version: 3.0.0
Platform: x86-64
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: Unspecified
AssignedTo: xen-bugs@xxxxxxxxxxxxxxxxxxx
ReportedBy: xensource.com@xxxxxxxxx
On xen 3.0.0, my machine (dual core dual opteron --- means 4 way system) crashes
(and hangs until I push the reset button) when routing over additional virtual
devices (like veth0:1, veth0:2 ...) is used. My current workaround is having a
virtual machine doing all the routing which worksfine ....
Xen 3.0.0 is running on a Gentoo 2005.1 in 64 bit mode.
Best regards
Alexander Meisel
Dmesg of xen0:
--- snip ---
Linux version 2.6.12.6-xen0 (root@livecd) (gcc version 3.4.4 (Gentoo 3.4.4-r1, s
sp-3.4.4-1.0, pie-8.7.8)) #2 Fri Dec 9 19:58:23 CET 2005
kernel direct mapping tables upto 10800000 @ ece000-f54000
On node 0 totalpages: 67584
DMA zone: 67584 pages, LIFO batch:31
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000f6d40
ACPI: XSDT (v001 A M I OEMXSDT 0x06000524 MSFT 0x00000097) @ 0x00000000fbff010
0
ACPI: FADT (v001 A M I OEMFACP 0x06000524 MSFT 0x00000097) @ 0x00000000fbff028
1
ACPI: MADT (v001 A M I OEMAPIC 0x06000524 MSFT 0x00000097) @ 0x00000000fbff038
0
ACPI: OEMB (v001 A M I OEMBIOS 0x06000524 MSFT 0x00000097) @ 0x00000000fbfff04
0
ACPI: SRAT (v001 A M I OEMSRAT 0x06000524 MSFT 0x00000097) @ 0x00000000fbff39b
0
ACPI: HPET (v001 A M I OEMHPET 0x06000524 MSFT 0x00000097) @ 0x00000000fbff3ac
0
ACPI: ASF! (v001 AMIASF AMDSTRET 0x00000001 INTL 0x02002026) @ 0x00000000fbff3b0
0
ACPI: DSDT (v001 0AAAA 0AAAA001 0x00000001 INTL 0x02002026) @ 0x000000000000000
0
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x05] address[0xfebff000] gsi_base[24])
IOAPIC[1]: apic_id 5, version 17, address 0xfebff000, GSI 24-27
ACPI: IOAPIC (id[0x06] address[0xfebfe000] gsi_base[28])
IOAPIC[2]: apic_id 6, version 17, address 0xfebfe000, GSI 28-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to xen
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at fc000000 (gap: fc000000:3780000)
Built 1 zonelists
Kernel command line: root=/dev/evms/xen0 ro
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 65536 bytes)
Xen reported: 1991.485 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Software IO TLB enabled:
Aperture: 64 megabytes
Bus range: 0x000000000c000000 - 0x0000000010000000
Kernel range: 0xffff8800014fa000 - 0xffff8800054fa000
Memory: 175996k/270336k available (3287k kernel code, 93676k reserved, 1270k dat
a, 288k init)
Calibrating delay loop... 3971.48 BogoMIPS (lpj=19857408)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: Dual Core AMD Opteron(tm) Processor 270 stepping 02
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like a
n initrd
NET: Registered protocol family 16
PCI: Using configuration type 1
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:03:06.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
xen_mem: Initialising balloon driver.
SCSI subsystem initialized
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Grant table initialized
IA-32 Microcode Update Driver: v1.14-xen <tigran@xxxxxxxxxxx>
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Initializing Cryptographic API
PCI: MSI quirk detected. pci_msi_quirk set.
PCI: MSI quirk detected. pci_msi_quirk set.
Real Time Clock Driver v1.12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
HP CISS Driver (v 2.6.6)
Intel(R) PRO/1000 Network Driver - version 6.0.54-k2
Copyright (c) 1999-2004 Intel Corporation.
pcnet32.c:v1.30j 29.04.2005 tsbogend@xxxxxxxxxxxxxxxx
e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
tg3.c:v3.31 (June 8, 2005)
ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 24 (level, low) -> IRQ 24
eth0: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100
/1000BaseT Ethernet 00:e0:81:30:a1:16
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[769f4000]
ACPI: PCI Interrupt 0000:02:09.1[B] -> GSI 25 (level, low) -> IRQ 25
eth1: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100
/1000BaseT Ethernet 00:e0:81:30:a1:17
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[769f4000]
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
Xen virtual console successfully installed as ttyS0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
hdc: QSI CD-ROM SCR-242, ATAPI CD/DVD-ROM drive
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
ide1 at 0x170-0x177,0x376 on irq 15
hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
Red Hat/Adaptec aacraid driver (1.1.2-lk2 Dec 9 2005)
3ware Storage Controller device driver for Linux v1.26.02.001.
libata version 1.11 loaded.
sata_sil version 0.9
ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 17 (level, low) -> IRQ 17
ata1: SATA max UDMA/100 cmd 0xFFFFC20000004C80 ctl 0xFFFFC20000004C8A bmdma 0xFF
FFC20000004C00 irq 17
ata2: SATA max UDMA/100 cmd 0xFFFFC20000004CC0 ctl 0xFFFFC20000004CCA bmdma 0xFF
FFC20000004C08 irq 17
ata3: SATA max UDMA/100 cmd 0xFFFFC20000004E80 ctl 0xFFFFC20000004E8A bmdma 0xFF
FFC20000004E00 irq 17
ata4: SATA max UDMA/100 cmd 0xFFFFC20000004EC0 ctl 0xFFFFC20000004ECA bmdma 0xFF
FFC20000004E08 irq 17
ata1: dev 0 cfg 49:2f00 82:346b 83:7f61 84:4003 85:3469 86:3c41 87:4003 88:207f
ata1: dev 0 ATA, max UDMA/133, 488397168 sectors: lba48
ata1: dev 0 configured for UDMA/100
scsi0 : sata_sil
ata2: dev 0 cfg 49:2f00 82:346b 83:7f61 84:4003 85:3469 86:3c41 87:4003 88:207f
ata2: dev 0 ATA, max UDMA/133, 488397168 sectors: lba48
ata2: dev 0 configured for UDMA/100
scsi1 : sata_sil
ata3: dev 0 cfg 49:2f00 82:346b 83:7f61 84:4003 85:3469 86:3c41 87:4003 88:207f
ata3: dev 0 ATA, max UDMA/133, 488397168 sectors: lba48
ata3: dev 0 configured for UDMA/100
scsi2 : sata_sil
ata4: dev 0 cfg 49:2f00 82:346b 83:7f61 84:4003 85:3469 86:3c41 87:4003 88:207f
ata4: dev 0 ATA, max UDMA/133, 488397168 sectors: lba48
ata4: dev 0 configured for UDMA/100
scsi3 : sata_sil
Vendor: ATA Model: WDC WD2500JD-00H Rev: 08.0
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: WDC WD2500JD-00H Rev: 08.0
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: WDC WD2500JD-00H Rev: 08.0
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: WDC WD2500JD-00H Rev: 08.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 sdb3
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sdc: drive cache: write back
SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sdc: drive cache: write back
sdc: sdc1 sdc2 sdc3
Attached scsi disk sdc at scsi2, channel 0, id 0, lun 0
SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sdd: drive cache: write back
SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sdd: drive cache: write back
sdd: sdd1 sdd2 sdd3
Attached scsi disk sdd at scsi3, channel 0, id 0, lun 0
Fusion MPT base driver 3.01.20
Copyright (c) 1999-2004 LSI Logic Corporation
Fusion MPT SCSI Host driver 3.01.20
usbmon: debugs is not available
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:03:00.0[D] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:03:00.0: OHCI Host Controller
ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:03:00.0: irq 19, io mem 0xfeafc000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:03:00.1[D] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:03:00.1: OHCI Host Controller
ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:03:00.1: irq 19, io mem 0xfeafd000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
USB Universal Host Controller Interface driver v2.2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: generic_sse
generic_sse: 5340.800 MB/sec
raid5: using function: generic_sse (5340.800 MB/sec)
md: multipath personality registered as nr 7
md: faulty personality registered as nr 10
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@xxxxxxxxxx
device-mapper: dm-multipath version 1.0.4 loaded
device-mapper: dm-round-robin version 1.0.0 loaded
device-mapper: dm-emc version 0.0.3 loaded
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 17
Bridge firewalling registered
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 8192KiB [1 disk] into ram disk... done.
VFS: Mounted root (ext2 filesystem).
cdrom: open failed.
ioctl32(evms_activate:907): Unknown cmd fd(9) cmd(00000330){00} arg(ffffcd70) on
/dev/evms/.nodes/sda
ioctl32(evms_activate:907): Unknown cmd fd(10) cmd(00000330){00} arg(ffffcd70) o
n /dev/evms/.nodes/sdb
ioctl32(evms_activate:907): Unknown cmd fd(11) cmd(00000330){00} arg(ffffcd70) o
n /dev/evms/.nodes/sdc
ioctl32(evms_activate:907): Unknown cmd fd(12) cmd(00000330){00} arg(ffffcd70) o
n /dev/evms/.nodes/sdd
md: bind<dm-0>
md: bind<dm-1>
md: bind<dm-2>
md: bind<dm-3>
raid5: device dm-3 operational as raid disk 3
raid5: device dm-2 operational as raid disk 2
raid5: device dm-1 operational as raid disk 1
raid5: device dm-0 operational as raid disk 0
raid5: allocated 4270kB for md3
raid5: raid level 5 set md3 active with 4 out of 4 devices, algorithm 0
RAID5 conf printout:
--- rd:4 wd:4 fd:0
disk 0, o:1, dev:dm-0
disk 1, o:1, dev:dm-1
disk 2, o:1, dev:dm-2
disk 3, o:1, dev:dm-3
md: bind<dm-30>
md: bind<dm-31>
md: bind<dm-32>
md: bind<dm-33>
raid1: raid set md0 active with 3 out of 3 mirrors
ReiserFS: dm-48: found reiserfs format "3.6" with standard journal
ReiserFS: dm-48: using ordered data mode
ReiserFS: dm-48: journal params: device dm-48, size 8192, journal first block 18
, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-48: checking transaction log (dm-48)
ReiserFS: dm-48: replayed 8 transactions in 1 seconds
ReiserFS: dm-48: Using r5 hash to sort names
Adding 16771572k swap on /dev/evms/swap. Priority:-1 extents:1
cdrom: open failed.
cdrom: open failed.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-34, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
device vif0.0 entered promiscuous mode
xen-br0: port 1(vif0.0) entering learning state
xen-br0: topology change detected, propagating
xen-br0: port 1(vif0.0) entering forwarding state
bridge: can't decode speed from eth0: 65535
device eth0 entered promiscuous mode
tg3: eth0: Link is up at 1000 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
xen-br0: port 2(eth0) entering learning state
xen-br0: topology change detected, propagating
xen-br0: port 2(eth0) entering forwarding state
device vif1.0 entered promiscuous mode
xen-br0: port 3(vif1.0) entering learning state
xen-br0: topology change detected, propagating
xen-br0: port 3(vif1.0) entering forwarding state
device vif2.0 entered promiscuous mode
xen-br0: port 4(vif2.0) entering learning state
xen-br0: topology change detected, propagating
xen-br0: port 4(vif2.0) entering forwarding state
device vif3.0 entered promiscuous mode
xen-br0: port 5(vif3.0) entering learning state
xen-br0: topology change detected, propagating
xen-br0: port 5(vif3.0) entering forwarding state
device vif4.0 entered promiscuous mode
xen-br0: port 6(vif4.0) entering learning state
xen-br0: topology change detected, propagating
xen-br0: port 6(vif4.0) entering forwarding state
device vif5.0 entered promiscuous mode
xen-br0: port 7(vif5.0) entering learning state
xen-br0: topology change detected, propagating
xen-br0: port 7(vif5.0) entering forwarding state
device vif6.0 entered promiscuous mode
xen-br0: port 8(vif6.0) entering learning state
xen-br0: topology change detected, propagating
xen-br0: port 8(vif6.0) entering forwarding state
cdrom: open failed.
ReiserFS: dm-50: found reiserfs format "3.6" with standard journal
ReiserFS: dm-50: using ordered data mode
ReiserFS: dm-50: journal params: device dm-50, size 8192, journal first block 18
, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-50: checking transaction log (dm-50)
ReiserFS: dm-50: Using r5 hash to sort names
ReiserFS: dm-50: found reiserfs format "3.6" with standard journal
ReiserFS: dm-50: using ordered data mode
ReiserFS: dm-50: journal params: device dm-50, size 8192, journal first block 18
, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-50: checking transaction log (dm-50)
ReiserFS: dm-50: Using r5 hash to sort names
device vif7.0 entered promiscuous mode
xen-br0: port 9(vif7.0) entering learning state
xen-br0: topology change detected, propagating
xen-br0: port 9(vif7.0) entering forwarding state
--- snap ---
--
Configure bugmail:
http://bugzilla.xensource.com/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
_______________________________________________
Xen-bugs mailing list
Xen-bugs@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-bugs
|
Home