http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=221
------- Additional Comments From dbarrera@xxxxxxxxxx 2005-09-08 19:17 -------
(In reply to comment #4)
> Hmm, I can't repro this.
Nakajima, Jun <jun.nakajima@xxxxxxxxx> indicated that he saw the same problem
and that reverting changeset 6682 allowed him to proceed.
>Please can you post the boot log and xend-debug.log.
/var/log/boot.log? it is empty.
/var/log/boot.msg:
bl2-1:/var/log # cat boot.msg
Inspecting /boot/System.map-2.6.12-xen0
Loaded 23959 symbols from /boot/System.map-2.6.12-xen0.
Symbols match kernel version 2.6.12.
No module symbols loaded - kernel modules not enabled.
klogd 1.4.1, log source = ksyslog started.
<5>Linux version 2.6.12-xen0 (root@bl2-1) (gcc version 3.3.3 (SuSE Linux)) #1
Thu Sep 8 13:06:05 CDT 2005
<4>kernel direct mapping tables upto fa00000 @ 6b5000-734000
<7>On node 0 totalpages: 64000
<7> DMA zone: 64000 pages, LIFO batch:31
<7> Normal zone: 0 pages, LIFO batch:1
<7> HighMem zone: 0 pages, LIFO batch:1
<6>No mptable found.
<7>ACPI: RSDP (v000 IBM ) @
0x00000000000fdfc0<7>ACPI: RSDT (v001 IBM SERBLADE 0x00001000 IBM
0x45444f43) @ 0x000000003ffcff80
<7>ACPI: FADT (v002 IBM SERBLADE 0x00001000 IBM 0x45444f43) @
0x000000003ffcfec0
<7>ACPI: MADT (v001 IBM SERBLADE 0x00001000 IBM 0x45444f43) @
0x000000003ffcfe00
<7>ACPI: MCFG (v001 IBM SERBLADE 0x00001000 IBM 0x45444f43) @
0x000000003ffcfdc0
<7>ACPI: DSDT (v001 IBM SERBLADE 0x00001000 INTL 0x02002025) @
0x0000000000000000
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
<6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
<6>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
<6>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
<6>ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
<6>IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
<6>ACPI: IOAPIC (id[0x0d] address[0xfec10000] gsi_base[24])
<6>IOAPIC[1]: apic_id 13, version 32, address 0xfec10000, GSI 24-47
<6>ACPI: IOAPIC (id[0x0c] address[0xfec81000] gsi_base[48])
<6>IOAPIC[2]: apic_id 12, version 32, address 0xfec81000, GSI 48-71
<6>ACPI: IOAPIC (id[0x0b] address[0xfec81400] gsi_base[72])
<6>IOAPIC[3]: apic_id 11, version 32, address 0xfec81400, GSI 72-95
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
<7>ACPI: IRQ0 used by override.
<7>ACPI: IRQ2 used by override.
<7>ACPI: IRQ11 used by override.
<6>Setting APIC routing to xen
<6>Using ACPI (MADT) for SMP configuration information
<6>Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
<4>Built 1 zonelists
<5>Kernel command line: root=/dev/sda6 ro console=tty0
<4>Initializing CPU#0
<4>PID hash table entries: 1024 (order: 10, 32768 bytes)
<6>Xen reported: 3600.328 MHz processor.
<4>Console: colour VGA+ 80x25
<4>Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
<4>Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
<6>Software IO TLB disabled
<4>Memory: 245248k/256000k available (3275k kernel code, 10316k reserved, 1275k
data, 288k init)
<7>Calibrating delay loop... 7182.74 BogoMIPS (lpj=35913728)
<4>Mount-cache hash table entries: 256
<6>CPU: Trace cache: 12K uops, L1 D cache: 16K
<6>CPU: L2 cache: 1024K
<4>CPU: Intel(R) Xeon(TM) CPU 3.60GHz stepping 01
<6>NET: Registered protocol family 16
<6>PCI: Using configuration type 1
<6>ACPI: Subsystem revision 20050309
<6>ACPI: Interpreter enabled
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<4>PCI: Probing PCI hardware (bus 00)
<6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
<7>Boot video device is 0000:01:01.0
<6>PCI: Transparent bridge - 0000:00:1e.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI2._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI3._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIS._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIX._PRT]
<4>ACPI: PCI Interrupt Link [LP00] (IRQs *10)
<4>ACPI: PCI Interrupt Link [LP01] (IRQs *7)
<4>ACPI: PCI Interrupt Link [LP02] (IRQs *5)
<4>ACPI: PCI Interrupt Link [LP03] (IRQs *5)
<4>ACPI: PCI Interrupt Link [LP04] (IRQs *10)
<4>ACPI: PCI Interrupt Link [LP05] (IRQs) *0, disabled.
<4>ACPI: PCI Interrupt Link [LP06] (IRQs *10)
<4>ACPI: PCI Interrupt Link [LP07] (IRQs) *0, disabled.
<6>xen_mem: Initialising balloon driver.
<5>SCSI subsystem initialized
<6>usbcore: registered new driver hub
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
<3>PCI: Cannot allocate resource region 1 of device 0000:00:00.0
<4>Grant table initialized
<6>IA-32 Microcode Update Driver: v1.14 <tigran@xxxxxxxxxxx>
<4>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
<6>Initializing Cryptographic API
<6>Real Time Clock Driver v1.12
<3>i8042.c: Can't read CTR while initializing i8042.
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<6>Floppy drive(s): fd0 is 1.44M
<4>floppy0: no floppy controllers found
<4>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>HP CISS Driver (v 2.6.6)
<6>Intel(R) PRO/1000 Network Driver - version 6.0.54-k2
<6>Copyright (c) 1999-2004 Intel Corporation.
<6>pcnet32.c:v1.30j 29.04.2005 tsbogend@xxxxxxxxxxxxxxxx
<6>e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
<6>e100: Copyright(c) 1999-2005 Intel Corporation
<6>tg3.c:v3.31 (June 8, 2005)
<6>ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 77 (level, low) -> IRQ 77
<6>eth0: Tigon3 [partno(BCM95704A41) rev 2100 PHY(serdes)] (PCIX:133MHz:64-bit)
10/100/1000BaseT Ethernet 00:11:25:9d:69:86
<6>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1]
TSOcap[0]
<6>eth0: dma_rwctrl[769f4000]
<6>ACPI: PCI Interrupt 0000:05:01.1[B] -> GSI 78 (level, low) -> IRQ 78
<6>eth1: Tigon3 [partno(BCM95704A41) rev 2100 PHY(serdes)] (PCIX:133MHz:64-bit)
10/100/1000BaseT Ethernet 00:11:25:9d:69:87
<6>eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1]
TSOcap[1]
<6>eth1: dma_rwctrl[769f4000]
<6>tun: Universal TUN/TAP device driver, 1.6
<6>tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
<4>Xen virtual console successfully installed as ttyS0
<4>Event-channel device installed.
<6>xen_net: Initialising Xen netif backend.
<6>xen_net: Using grant tables.
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>ICH5: IDE controller at PCI slot 0000:00:1f.1
<6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 14 (level, low) -> IRQ 14
<6>ICH5: chipset revision 2
<6>ICH5: not 100%% native mode: will probe irqs later
<6>ICH5: neither IDE port enabled (BIOS)
<7>Probing IDE interface ide0...
<7>Probing IDE interface ide1...
<7>Probing IDE interface ide2...
<7>Probing IDE interface ide3...
<7>Probing IDE interface ide4...
<7>Probing IDE interface ide5...
<6>Red Hat/Adaptec aacraid driver (1.1.2-lk2 Sep 8 2005)
<4>3ware Storage Controller device driver for Linux v1.26.02.001.
<7>libata version 1.11 loaded.
<6>Fusion MPT base driver 3.01.20
<6>Copyright (c) 1999-2004 LSI Logic Corporation
<6>ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 24 (level, low) -> IRQ 24
<6>mptbase: Initiating ioc0 bringup
<6>ioc0: 53C1030: Capabilities={Initiator}
<6>Fusion MPT SCSI Host driver 3.01.20
<6>scsi0 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=222, IRQ=24
<5> Vendor: IBM-ESXS Model: ST936701LC FN Rev: B415
<5> Type: Direct-Access ANSI SCSI revision: 04
<5>SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
<5>SCSI device sda: drive cache: write through
<5>SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
<5>SCSI device sda: drive cache: write through
<6> sda: sda1 sda2 < sda5 sda6 >
<5>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
<5> Vendor: IBM-ESXS Model: ST936701LC FN Rev: B415
<5> Type: Direct-Access ANSI SCSI revision: 04
<5>SCSI device sdb: 71096640 512-byte hdwr sectors (36401 MB)
<5>SCSI device sdb: drive cache: write through
<5>SCSI device sdb: 71096640 512-byte hdwr sectors (36401 MB)
<5>SCSI device sdb: drive cache: write through
<6> sdb: sdb1 < sdb5 sdb6 > sdb2 sdb3
<5>Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
<5>usbmon: debugs is not available
<7>ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
<6>USB Universal Host Controller Interface driver v2.2
<6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
<7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
<6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
<6>uhci_hcd 0000:00:1d.0: irq 16, io base 0x00002200
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
<7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
<6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
<6>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002600
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>usbcore: registered new driver usbhid
<6>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
<6>mice: PS/2 mouse device common for all mice
<6>md: linear personality registered as nr 1
<6>md: raid0 personality registered as nr 2
<6>md: raid1 personality registered as nr 3
<6>md: multipath personality registered as nr 7
<6>md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@xxxxxxxxxx
<6>device-mapper: dm-multipath version 1.0.4 loaded
<6>device-mapper: dm-round-robin version 1.0.0 loaded
<6>device-mapper: dm-emc version 0.0.3 loaded
<6>NET: Registered protocol family 2
<6>IP: routing cache hash table of 2048 buckets, 16Kbytes
<4>TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<4>TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
<6>TCP: Hash tables configured (established 8192 bind 8192)
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 17
<5>Bridge firewalling registered
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3-fs: mounted filesystem with ordered data mode.
<4>VFS: Mounted root (ext3 filesystem) readonly.
<6>EXT3 FS on sda6, internal journal
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sda1, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>Adding 1052216k swap on /dev/sda5. Priority:42 extents:1
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Thu Sep 8 13:14:36 2005
Master Resource Control: previous runlevel: N, switching to runlevel: 3
<notice>start services (random isdn irq_balancer hotplug)
Hotplug is already active (disable with NOHOTPLUG=1 at the boot prompt)done
<notice>startproc: execve (/usr/sbin/irqbalance) [ /usr/sbin/irqbalance ], [
CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=20
INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N
LINES=25 HOME=/ SHLVL=2 sscripts=48 _=/sbin/startproc
DAEMON=/usr/sbin/irqbalance ]
Initializing random number generatordone
Starting irqbalance failed
<notice>exit status of (random isdn irq_balancer hotplug) is (0 0 7 0)
<notice>start services (coldplug)
coldplug scanning input: done
scanning pci: *W*W*..WW**.*W.**..done
scanning usb: done
. . . . . . . . . . . . . . . . . . . . . . .
.done
<notice>exit status of (coldplug) is (0)
<notice>start services (network)
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
done eth0 device: Broadcom Corporation NetXtreme BCM5704S Gigabit
Ethernet (rev 10)
eth0 No configuration found for eth0
unused eth1 device: Broadcom Corporation NetXtreme BCM5704S Gigabit
Ethernet (rev 10)
eth1 configuration: eth-id-00:11:25:9d:69:87
eth1 IP address: 9.3.192.194/24
done veth0
veth0 No configuration found for veth0
unused vif0.0
vif0.0 No configuration found for vif0.0
unusedSetting up service network . . . . . . . . . . . . . . .
.done
<notice>exit status of (network) is (0)
<notice>start services (syslog)
Starting syslog services<notice>startproc: execve (/sbin/syslogd) [
/sbin/syslogd -a /var/lib/dhcp/dev/log -a /var/lib/named/dev/log -a
/var/lib/ntp/dev/log -a /var/lib/stunnel/dev/log ], [ CONSOLE=/dev/console
TERM=linux SHELL=/bin/sh progress=26 INIT_VERSION=sysvinit-2.85
REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin
RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 sscripts=48
_=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 -x ], [
CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=26
INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N
LINES=25 HOME=/ SHLVL=2 sscripts=48 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
<notice>exit status of (syslog) is (0)
<notice>start services (splash_early resmgr portmap)
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [
CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=27
INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N
LINES=25 HOME=/ SHLVL=2 sscripts=48 _=/sbin/startproc DAEMON=/sbin/portmap ]
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [
CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=27
INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N
LINES=25 HOME=/ SHLVL=2 sscripts=48 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
Starting RPC portmap daemondone
Starting resource managerdone
<notice>exit status of (splash_early resmgr portmap) is (0 0 0)
<notice>start services (nfsboot nfs)
Starting nfsboot (sm-notify) done
Importing Net File System (NFS)nfs server reported tcp not available, falling
back to udp
Using NFS over UDP can cause data corruption.
Please refer to the WARNINGS section of the nfs(5) manual page.
done
<notice>exit status of (nfsboot nfs) is (0 0)
<notice>start services (sshd running-kernel fbset alsasound)
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o
PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux
SHELL=/bin/sh progress=32 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1
COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/
PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 sscripts=48 _=/sbin/startproc
DAEMON=/usr/sbin/sshd ]
Starting sound driverdone
Starting SSH daemondone
<notice>exit status of (sshd running-kernel fbset alsasound) is (0 0 0 0)
<notice>start services (splash powersaved kbd)
<notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -e
/etc/powersave.conf -a resmgr -v 3 ], [ CONSOLE=/dev/console TERM=linux
SHELL=/bin/sh progress=36 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1
COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/
PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 sscripts=48 _=/sbin/startproc
DAEMON=/usr/sbin/powersaved ]
loading ACPI modules (ac battery button fan processor thermal ) Starting
powersaved done
Loading keymap qwerty/us.map.gz
doneLoading compose table winkeys shiftctrl latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu -m trivial (K
done<notice>exit status of (splash powersaved kbd) is (5 0 0)
<notice>start services (slpd hwscan)
Starting hardware scan on boot<notice>startproc: execve (/usr/sbin/slpd) [
/usr/sbin/slpd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=39
INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N
LINES=25 HOME=/ SHLVL=2 sscripts=48 _=/sbin/startproc DAEMON=/usr/sbin/slpd ]
Starting slpd done
<notice>exit status of (slpd hwscan) is (0 0)
<notice>start services (cups)
Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [
CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=41
INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N
LINES=25 HOME=/ SHLVL=2 sscripts=48 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
done
<notice>exit status of (cups) is (0)
<notice>start services (nscd)
Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [
/usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=42
INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N
LINES=25 HOME=/ SHLVL=2 sscripts=48 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
<notice>exit status of (nscd) is (0)
<notice>start services (smbfs postfix)
Mount SMB/ CIFS File Systems unused
Starting mail service (Postfix)done
<notice>exit status of (smbfs postfix) is (6 0)
<notice>start services (xinetd cron)
<notice>startproc: execve (/usr/sbin/xinetd) [ /usr/sbin/xinetd ], [
CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=45
INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N
LINES=25 HOME=/ SHLVL=2 sscripts=48 _=/sbin/startproc DAEMON=/usr/sbin/xinetd ]
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [
CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=45
INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N
LINES=25 HOME=/ SHLVL=2 sscripts=48 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting CRON daemondone
Starting INET services. (xinetd)done
<notice>exit status of (xinetd cron) is (0 0)
<notice>start services (splash_late)
<notice>exit status of (splash_late) is (0)
<notice>start services (xentest)
mount: fs type subfs not supported by kernel
Starting Xentest: Not starting tests.
<notice>exit status of (xentest) is (0)
Master Resource Control: runlevel 3 has been reached
Failed services in runlevel 3: irq_balancer
Skipped services in runlevel 3: splash smbfs
<notice>killproc: kill(1731,3)
bl2-1:/var/log # cat xend-debug.log
Failed alocation for dom 1 : 11727408267264 pages order 0 addr_bits 0
Traceback (most recent call last):
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomainInfo.py",
line 647, in construct
self.init_domain()
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomainInfo.py",
line 841, in init_domain
id = self.image.initDomain(self.id, self.memory, self.ssidref, cpu,
self.cpu_weight)
File "/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/image.py",
line 167, in initDomain
xc.domain_memory_increase_reservation(dom, mem_kb-lmem_kb, 0, 0)
error: (12, 'Cannot allocate memory')
Traceback (most recent call last):
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/server/SrvDomainDir.py",
line 78, in op_create
dominfo = self.xd.domain_create(config)
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomain.py",
line 293, in domain_create
dominfo = XendDomainInfo.create(self.dbmap, config)
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomainInfo.py",
line 160, in create
vm.construct(config)
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomainInfo.py",
line 647, in construct
self.init_domain()
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomainInfo.py",
line 841, in init_domain
id = self.image.initDomain(self.id, self.memory, self.ssidref, cpu,
self.cpu_weight)
File "/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/image.py",
line 167, in initDomain
xc.domain_memory_increase_reservation(dom, mem_kb-lmem_kb, 0, 0)
error: (12, 'Cannot allocate memory')
memory')
Failed alocation for dom 2 : -2147482624 pages order 0 addr_bits 32
Traceback (most recent call last):
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomainInfo.py",
line 647, in construct
self.init_domain()
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomainInfo.py",
line 841, in init_domain
id = self.image.initDomain(self.id, self.memory, self.ssidref, cpu,
self.cpu_weight)
File "/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/image.py",
line 164, in initDomain
xc.domain_memory_increase_reservation(dom, min(lmem_kb,mem_kb), 0, 32)
error: (12, 'Cannot allocate memory')
Traceback (most recent call last):
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/server/SrvDomainDir.py",
line 78, in op_create
dominfo = self.xd.domain_create(config)
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomain.py",
line 293, in domain_create
dominfo = XendDomainInfo.create(self.dbmap, config)
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomainInfo.py",
line 160, in create
vm.construct(config)
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomainInfo.py",
line 647, in construct
self.init_domain()
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomainInfo.py",
line 841, in init_domain
id = self.image.initDomain(self.id, self.memory, self.ssidref, cpu,
self.cpu_weight)
File "/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/image.py",
line 164, in initDomain
xc.domain_memory_increase_reservation(dom, min(lmem_kb,mem_kb), 0, 32)
error: (12, 'Cannot allocate memory')
ine 339, in releaseDomain
db.releaseDomain(dom)
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/xenstore/xsnode.py",
line 468, in releaseDomain
self.store.releaseDomain(dom)
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/xenstore/xsnode.py",
line 378, in releaseDomain
self.getxs().release_domain(dom)
RuntimeError: (2, 'No such file or directory')
Traceback (most recent call last):
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/server/SrvDomainDir.py",
line 78, in op_create
dominfo = self.xd.domain_create(config)
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomain.py",
line 292, in domain_create
dominfo = XendDomainInfo.create(self.dbmap, config)
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomainInfo.py",
line 161, in create
vm.construct(config)
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomainInfo.py",
line 597, in construct
self.construct_image()
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomainInfo.py",
line 656, in construct_image
self.image.createImage()
File "/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/image.py",
line 173, in createImage
self.createDomain()
File "/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/image.py",
line 209, in createDomain
err = self.buildDomain()
File "/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/image.py",
line 248, in buildDomain
vcpus = self.vm.vcpus)
error: (0, 'Error')
in releaseDomain
db.releaseDomain(dom)
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/xenstore/xsnode.py",
line 468, in releaseDomain
self.store.releaseDomain(dom)
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/xenstore/xsnode.py",
line 378, in releaseDomain
self.getxs().release_domain(dom)
RuntimeError: (2, 'No such file or directory')
Traceback (most recent call last):
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/server/SrvDomainDir.py",
line 78, in op_create
dominfo = self.xd.domain_create(config)
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomain.py",
line 292, in domain_create
dominfo = XendDomainInfo.create(self.dbmap, config)
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomainInfo.py",
line 161, in create
vm.construct(config)
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomainInfo.py",
line 597, in construct
self.construct_image()
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomainInfo.py",
line 656, in construct_image
self.image.createImage()
File "/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/image.py",
line 173, in createImage
self.createDomain()
File "/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/image.py",
line 209, in createDomain
err = self.buildDomain()
File "/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/image.py",
line 248, in buildDomain
vcpus = self.vm.vcpus)
error: (0, 'Error')
ERROR: Error constructing guest OS
Traceback (most recent call last):
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomainInfo.py",
line 597, in construct
self.construct_image()
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomainInfo.py",
line 656, in construct_image
self.image.createImage()
File "/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/image.py",
line 173, in createImage
self.createDomain()
File "/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/image.py",
line 209, in createDomain
err = self.buildDomain()
File "/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/image.py",
line 248, in buildDomain
vcpus = self.vm.vcpus)
error: (0, 'Error')
Traceback (most recent call last):
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/xenstore/xsobj.py",
line 339, in releaseDomain
db.releaseDomain(dom)
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/xenstore/xsnode.py",
line 468, in releaseDomain
self.store.releaseDomain(dom)
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/xenstore/xsnode.py",
line 378, in releaseDomain
self.getxs().release_domain(dom)
RuntimeError: (2, 'No such file or directory')
Traceback (most recent call last):
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/server/SrvDomainDir.py",
line 78, in op_create
dominfo = self.xd.domain_create(config)
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomain.py",
line 292, in domain_create
dominfo = XendDomainInfo.create(self.dbmap, config)
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomainInfo.py",
line 161, in create
vm.construct(config)
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomainInfo.py",
line 597, in construct
self.construct_image()
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomainInfo.py",
line 656, in construct_image
self.image.createImage()
File "/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/image.py",
line 173, in createImage
self.createDomain()
File "/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/image.py",
line 209, in createDomain
err = self.buildDomain()
File "/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/image.py",
line 248, in buildDomain
vcpus = self.vm.vcpus)
error: (0, 'Error')
ERROR: Error constructing guest OS
Traceback (most recent call last):
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomainInfo.py",
line 597, in construct
self.construct_image()
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomainInfo.py",
line 656, in construct_image
self.image.createImage()
File "/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/image.py",
line 173, in createImage
self.createDomain()
File "/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/image.py",
line 209, in createDomain
err = self.buildDomain()
File "/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/image.py",
line 248, in buildDomain
vcpus = self.vm.vcpus)
error: (0, 'Error')
Traceback (most recent call last):
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/xenstore/xsobj.py",
line 339, in releaseDomain
db.releaseDomain(dom)
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/xenstore/xsnode.py",
line 468, in releaseDomain
self.store.releaseDomain(dom)
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/xenstore/xsnode.py",
line 378, in releaseDomain
self.getxs().release_domain(dom)
RuntimeError: (2, 'No such file or directory')
Traceback (most recent call last):
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/server/SrvDomainDir.py",
line 78, in op_create
dominfo = self.xd.domain_create(config)
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomain.py",
line 292, in domain_create
dominfo = XendDomainInfo.create(self.dbmap, config)
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomainInfo.py",
line 161, in create
vm.construct(config)
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomainInfo.py",
line 597, in construct
self.construct_image()
File
"/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/XendDomainInfo.py",
line 656, in construct_image
self.image.createImage()
File "/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/image.py",
line 173, in createImage
self.createDomain()
File "/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/image.py",
line 209, in createDomain
err = self.buildDomain()
File "/tmp/xen-unstable.hg/dist/install/usr/lib64/python/xen/xend/image.py",
line 248, in buildDomain
vcpus = self.vm.vcpus)
error: (0, 'Error')
>
>
> How much memory does your machine have? How much have you allcoted dom0? Are
> you
> doing this via the balloon driver or dom0_mem= ?
The machine has 1GB of memory. Dom0 has 256MB allocated via dom0_mem=256000.
--
Configure bugmail:
http://bugzilla.xensource.com/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
_______________________________________________
Xen-bugs mailing list
Xen-bugs@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-bugs
|
Home