On Fri, Sep 28, 2007 at 08:55:41PM +0200, ROSSIER Daniel wrote:
>
> Hello,
>
> We have now started the port of XEN on a Xscale/PXA270 processor (actually
> using a Colibri board from Toradex).
For those w/o ARM target hardware and/or lacking hardware based debuggers,
I'ld recommend using QEMU for bringup and debugging of Xen on ARM. In
fact, I'ld recommend using QEMU even if you have the hardware and tools.
Using QEMU for this task is quite convenient since gdbserver support is
builtin so low-level target debugging can be performed on your development
host with no ARM hardware and/or ARM debugging tools required. Alas QEMU
may not include support for your specific target.
> Ongoing work consists at porting the bootstrap code from XEN on the ARM
> without enabling the virtualization
> mechanisms. The goal is to have a software infrastructure which is compliant
> with the XEN tree organization
> and to have the right init code which works on the target machine.
>
> In summary, what we are doing is to have the bootstrap code which gives the
> hand to the XEN initialization code, which in turns
> starts the primary domain-0 Linux.
>
> The init code will be strongly inspired from Daniel Ferstay's work as well as
> the standard ARM arch-dependent code from the
> vanilla kernel (we're considering the 2.6.18 version).
Have you considered using linux-2.6.23-rc as a starting baseline? It
already includes DomU paravirt support for x86. So perhaps this would
be a good base line to start adding ARM paravirt support?
> Then, we will gradually enable the virtualization part of the code
> (scheduler, memory manager, etc.) in the hypervisor and adapt the
> bootstrap code accordingly. How will the XEN concepts be mapped on the ARM
> remain an open issue, but for sure the work from Daniel Ferstay
> and your feedback and contribution will definitively help. I think we may
> also consider the approaches presented by other ARM-target hypervisors such
> as Iguana/L4, Jaluna, etc.
>
> I hope to be able to post a first patch for the 2.6.18 kernel pretty soon.
I hope we're able to collaborate on this but I'm unable to make any
commitments at this time. : (
> Any hints, comments, suggestions, contributions are highly welcome and
> helpful.
>
> Thanks a lot
>
> Daniel
>
>
>
>
>
> _______________________________________________
> Xen-arm mailing list
> Xen-arm@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-arm
--
Regards,
George
_______________________________________________
Xen-arm mailing list
Xen-arm@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-arm
|
Home