| |
|
 |
|
 |
|
|
|
| |
|
|
xense-devel
[Xen-devel] Re: [Xense-devel] Infineon vtpm problem
Hi
I have checked out the 0.3.2cvs version of trousers and finally get the
tsstest working with very few differences from when it is run under
non-xen host. My previous attempts was on 0.3.1 (stable).
However when run tpm_sealdata, I still get
Tspi_Key_LoadKey failed: 0x00003113 - layer=tsp, code=0113 (275),
Authorization failed.
This reminds me that maybe I am using vtpm wrong way. Is there a
document about how to use vtpm?
Here is what I do from sratch:
1. Clear and reactivate TPM from bios.
2. Run vtpm_managerd in dom0 and let it continue running on console.
3. Boot domU with vif statement in config file.
4. Run tcsd -f on domU and let it continue running on console.
From now on every tpm operation I run on domU returns an error.
Operations tried on domU
1. I tried tpm_takeownership with success (although I see an error on
tcsd -f output, I assume it is normal because I see exact same error
when I run takeownership from non-xen host and actually prove ownership
taken by using sealdata successfully) but when I try tpm_sealdata I get
above error.
2. After starting from scratch, I tried tpm_sealdata without first try
to take ownership. This time there is a different output:
Enter SRK password:
Tspi_Key_CreateKey failed: 0x00000003 - layer=tpm, code=0003 (3), Bad
Parameter
I think I am not able to use vtpm because probably I am not doing the
right sequence of actions on domU. So if there is a document about vtpm
usage, please point me to it.
And here is another question:
I never run tpm_takeownership on dom0. Whenever I start from scratch I
let the vtpm_managerd to take ownership of tpm. However, I do not know
the owner or srk password it uses. When I use vtpm on domU and asked for
the srk pasword, which password should I enter? Also, should I take
ownership of vtpm on domU every time I booted it? How do I save state of
the vtpm for a domain across boots?
Thanks for time.
Erdem Bayer
Stefan Berger wrote On 27-02-2008 05:59:
xense-devel-bounces@xxxxxxxxxxxxxxxxxxx wrote on 02/26/2008 06:28:01 PM:
> Hi
>
> I have successfully applied the patch mentioned here
>
(http://lists.xensource.com/archives/html/xense-devel/2007-04/msg00005.html)
> to the xen v. 3.1.3 on an HP nx8325 with Infineon TPM.
>
> I cleared the tpm, deleted /var/vtpm/VTPM file and rebooted.
>
> After reboot, vtpm_managerd runs ok. (output is attched to the mail.)
>
> I created a pv vm with the option vtpm = ['instance=1, backend=0'] The
> vm boots fine.
>
> I installed trousers-0.3.1 and tpm-tools-1.3.1 from sources on the vm.
>
> I run tcsd -f on the vm. (output is attched to the mail.)
>
> I checkout and run the trousers test suite. 10 tests passed with 230
> failed. (Is this expected?)
It is likely that this (v)TPM implementation has quite a few bugs, but
I would not expect that many errors.
>
> When I try tpm_takeownership on the vm, the command runs fine.
(Although
> a strange warning appers on tcsd output which is attched).
This error may be related to older versions of the TPM device driver
having used an ioctl interface for sending/receiving commands to/from
the TPM and the TSS still tries this interface first. This should not
be a reason for the errors you are seeing.
>
> But when I try tpm_sealdata < foo on the vm I get the following error.
>
> Tspi_Key_LoadKey failed: 0x00003113 - layer=tsp, code=0113 (275),
> Authorization failed
>
> But other tpm_version runs fine on vm.
>
> tpm-test:~# tpm_version
> TPM 1.2 Version Info:
> Chip Version: 1.2.0.4
> Spec Level: 2
> Errata Revision: 94
> TPM Vendor ID:
> TPM Version: 01010000
> Manufacturer Info: 4554485a
>
> Also this quote is from Xen User's Guide:
>
> "Similarly, the TPM frontend driver must be compiled for the kernel
> trying to use TPM functionality. Its driver can be selected in the
> kernel configuration section Device Driver / Character Devices / TPM
> Devices. Along with that the TPM driver for the built-in TPM must be
> selected."
>
> According to my understanding driver for the built-in TPM must be
> selected on the kernel where TPM frontend driver is used. Am I correct
> about this assumption? (The problem is tpm_infineon driver can not be
The driver for the built-in Infineon TPM must be built into Domain-0,
the TPM frontend driver in the guest domain and the backend driver
also into Domain-0. This has probably been done correctly since
otherwise the vTPM would not work at all.
> selected on an unpriviledged kernel, it can only be selected on a
> priviledged kernel)
>
> Am I missing something here? Why do I get auth errors?
Did you try to run the same sequence of comands (tpm commands, test
suite etc.) on a plain Linux kernel with the TSS stack against the
built-in Infineone TPM? From what I remember, the test suite for the
TSS stack either tries to set a specific TPM owner password or it must
previously have been set to it by the user, otherwise many
authentication errors will occur.
Stefan
>
> Thanks in advance.
>
> Erdem Bayer
> [attachment "vtpm_managerd.out" deleted by Stefan Berger/Watson/IBM]
> [attachment "tcsd.out" deleted by Stefan Berger/Watson/IBM]
> _______________________________________________
> Xense-devel mailing list
> Xense-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xense-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
|
|
| |
|
Home