Re: [Xen-users] Xen HVM DomU image (*.iso) file?

[Victor Ling <victor_ling12@xxxxxxxxx>]

resending to the group

---

From: Victor Ling <victor_ling12@xxxxxxxxx>
To: Flavio <fbcyborg@xxxxxxxxx>
Sent: Thursday, November 3, 2011 10:24 AM
Subject: Re: [Xen-users] Xen HVM DomU image (*.iso) file?

I used default "NEXT", the DomU dies during installation with the following log:

I am relative new on this area. Do you have any suggestion?

Thanks.

Vic

-------------------------------------------------------------------------------------------------------

LOG FROM QEMU

domid: 48

config qemu network with xen bridge for  tap48.0 None
WARNING! None is not a bridge.  qemu-ifup exiting.  VM may not have a functioning networking stack.
Using file /opt/images/SLES_11.img in read-write mode
Using xvdc for guest's hdc
Using file /dev/dvd in read-only mode
Watching /local/domain/0/device-model/48/logdirty/cmd
Watching /local/domain/0/device-model/48/command
char device redirected to /dev/pts/16
qemu_map_cache_init nr_buckets = 10000 size 4194304
/usr/src/packages/BUILD/xen-4.0.2-testing/tools/ioemu-dir/hw/xen_blktap.c:704: Init blktap pipes
shared page at pfn feffd
buffered io page at pfn feffb
Guest uuid = aae95048-7035-9669-ff68-94f290b4c697
Time offset set 0
populating video RAM at ff000000
mapping video RAM from ff000000
Register xen platform.
Done register platform.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
xs_read(/local/domain/0/device-model/48/xen_extended_power_mgmt): read error
xs_read(): vncpasswd get error. /vm/aae95048-7035-9669-ff68-94f290b4c697/vncpasswd.
Log-dirty: no command yet.
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
xs_read(/local/domain/48/log-throttling): read error
qemu: ignoring not-understood drive `/local/domain/48/log-throttling'
medium change watch on `/local/domain/48/log-throttling' - unknown device, ignored
cirrus vga map change while on lfb mode
mapping vram to f0000000 - f0400000
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro state.
track_dirty_vram(f0000000, 1c2) failed (-1, 3)

---

From: Flavio <fbcyborg@xxxxxxxxx>
To: Victor Ling <victor_ling12@xxxxxxxxx>
Cc: Fajar A. Nugraha <list@xxxxxxxxx>; "Xen-users@xxxxxxxxxxxxxxxxxxx" <Xen-users@xxxxxxxxxxxxxxxxxxx>
Sent: Thursday, November 3, 2011 9:03 AM
Subject: Re: [Xen-users] Xen HVM DomU image (*.iso) file?

On 3 November 2011 16:58, Victor Ling <victor_ling12@xxxxxxxxx> wrote:
> I am working on GPU passthrough. I tried PV DomU but didn't work. From the
> information I read it seems that I need to have HVM DomU for PCI
> passthrough. I am creating an image file for HVM DomU.
> If this is not the case, please let me know.
Thank you for the information.

--
Flavio

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users