|
|
|
|
|
|
|
|
|
|
xen-users
Re: [Xen-users] PCI passthrough to NexentaStor?
Am 19.10.2011 23:13, schrieb Chris Marget:
I've headed down the path of building a virtual NexentaStor appliance
with the intention of passing a SATA controller full of disks through
to it... But I'm beginning to have doubts about whether it's
possible.
NexentaStor is running in a Debian Squeeze Dom0 with Xen 4.0. PCI
pass-through is working with other DomU's, but I see no sign of my
passed-through devices inside NexentaStor.
xend.log seems to indicate that the pass-through is working, and the
device is assigned according to 'xm pci-list<my-vm>'
Sadly, 'lspci' within NexentaStor reports "Cannot find any working
access method.", and 'prtconf -vp' reports nothing that looks like
real hardware.
Is this supposed to work? I see lots of very old "coming soon"
promises about xen-pcifront and xen-pciback support in OpenSolaris,
but nothing to indicate that it ever became real.
I recentrly tried passthrough of an LSI 8x SAS controller to Solaris
Express 151. While running baremetal the LSI controller is well
supported in Solaris. Running Solaris as PV oder HVM DomU under OpenSuse
11.4 with Xen 4.0.2 and kernel 2.6.37 the DomU would freeze right after
boot (grub). I experienced the same with OpenSolaris 2009.06 and build
141 and if I recall correctly with NexentaStor Community as well.
With FreeNAS / FreeBSD kernels as PV DomU it seams to work though. And
as ZFS support was all I wanted, I stuck with FreeNAS.
Hope that helps.
Drake
If it's not expected to work, why are people building PV NexentaStore
appliances? Is there another use case that doesn't involve
pass-through of a disk controller?
Thank you!
/chris
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
|
|