| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
Re: [Xen-users] Error: Device 0 (vif) could not be connected. ip addr ad
Maybe you should try a valid IPv4 address instead of 10.0.0.329?
IPv4 addresses may only have four values from 0 to 254 (effectively
because 255 is in most cases broadcast), separated by dots.
Try an address like 10.0.0.229, that should work.
Regards,
Felix
Am 04.10.2011 21:12, schrieb Heist:
> I've looked everywhere for the error message I've posted in the title,
> doesn't seem like anyone else has it (lots of missing hotplugs scripts).
> We're using network-nat. ifconfig -a outputs this:
>
> eth0 Link encap:Ethernet HWaddr 00:19:99:a8:f4:5c
> inet addr:X.X.X.X Bcast:X.X.X.X Mask:255.255.255.255
> inet6 addr: X::X:X:X:X/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:233907120 errors:0 dropped:13 overruns:0 frame:1
> TX packets:207650975 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:211662949632 (197.1 GiB) TX bytes:94589739440 (88.0 GiB)
> Interrupt:18
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> inet6 addr: ::1/128 Scope:Host
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:34177 errors:0 dropped:0 overruns:0 frame:0
> TX packets:34177 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:2870973 (2.7 MiB) TX bytes:2870973 (2.7 MiB)
>
> vif10.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff
> inet addr:10.0.0.128 Bcast:0.0.0.0 Mask:255.255.255.255
> inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:12709868 errors:0 dropped:0 overruns:0 frame:0
> TX packets:15200680 errors:0 dropped:5 overruns:0 carrier:0
> collisions:0 txqueuelen:32
> RX bytes:9168041480 (8.5 GiB) TX bytes:9449301463 (8.8 GiB)
>
> vif2.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff
> inet addr:10.0.0.144 Bcast:0.0.0.0 Mask:255.255.255.255
> inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:14675180 errors:0 dropped:0 overruns:0 frame:0
> TX packets:14909317 errors:0 dropped:5 overruns:0 carrier:0
> collisions:0 txqueuelen:32
> RX bytes:7856634435 (7.3 GiB) TX bytes:3609331825 (3.3 GiB)
>
> vif21.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff
> inet addr:10.0.0.153 Bcast:0.0.0.0 Mask:255.255.255.255
> inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:5339 errors:0 dropped:0 overruns:0 frame:0
> TX packets:4593 errors:0 dropped:2 overruns:0 carrier:0
> collisions:0 txqueuelen:32
> RX bytes:426184 (416.1 KiB) TX bytes:867356 (847.0 KiB)
>
> vif5.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff
> inet addr:10.0.0.145 Bcast:0.0.0.0 Mask:255.255.255.255
> inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:6168852 errors:0 dropped:0 overruns:0 frame:0
> TX packets:6017891 errors:0 dropped:3 overruns:0 carrier:0
> collisions:0 txqueuelen:32
> RX bytes:2187308579 (2.0 GiB) TX bytes:2578588258 (2.4 GiB)
>
> vif8.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff
> inet addr:10.0.0.147 Bcast:0.0.0.0 Mask:255.255.255.255
> inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:2315417 errors:0 dropped:0 overruns:0 frame:0
> TX packets:3079044 errors:0 dropped:5 overruns:0 carrier:0
> collisions:0 txqueuelen:32
> RX bytes:830772507 (792.2 MiB) TX bytes:2375279128 (2.2 GiB)
>
> --
> View this message in context:
> http://xen.1045712.n5.nabble.com/Error-Device-0-vif-could-not-be-connected-ip-addr-add-10-0-0-329-dev-vif28-0-failed-tp4869998p4869998.html
> Sent from the Xen - User mailing list archive at Nabble.com.
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home