RE: [Xen-users] Debian 6 as Dom0 not booting on Xen 4.1.1

["Ian Tobin" <itobin@xxxxxxxxxxxxx>]

Hi,

Sorry for the delay in replying.

So the kernel that works is 3.0.0 ?

I am using 3.0.4 and it works very well, solved some of my other issues.

Thanks

Ian


-----Original Message-----
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx 
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of JP P
Sent: 27 September 2011 21:38
To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: RE: [Xen-users] Debian 6 as Dom0 not booting on Xen 4.1.1

Hello,

If you are using Debian 6 you could try the vmlinuz-3.0.0-1-rt-amd64 kernel 
which seems to work very well on my system.
I think it is worth a try.

Regards

JPPO







> Hello Ian,
> 
> 
> I have managed to solved every problem described bellow. This was by 
> recompiling the kernel, but this time with the same 2.6.32-5 Debian 
> Squeeze kernel configuration. The one I am working on is 3.0.0 from 
> Debian.org and the boot process is slow but normal.
> 
> 
> Now at the time of booting kernel 3.0.0 + Dom0 it hangs at:
> [ Configuring network interfaces... ]
> And it never goes on. I have commented lines of static IP address in 
> /etc/network/interfaces
> 
> 
> Only left uncommented these ones:
> 
> 
> auto lo
> iface lo inet loopback
> 
> 
> But still the same issue.
> Has this something to do with Xen? Or should I edit another file?
> 
> 
> Thank you!
> Tony.
> 
> 
> ______________________________________________________________________
> Subject: RE: [Xen-users] Debian 6 as Dom0 not booting on Xen 4.1.1
> Date: Mon, 26 Sep 2011 11:29:36 +0100
> From: itobin@xxxxxxxxxxxxx
> To: dftonywhite@xxxxxxxxxxx; xen-users@xxxxxxxxxxxxxxxxxxx
> CC: 
> 
> Hi,
> 
>  
> 
> What kernel as you running?
> 
>  
> 
> Thanks
> 
>  
> 
> Ian
> 
>  
> 
>  
> 
> From: Antonio Colin [mailto:dftonywhite@xxxxxxxxxxx]
> Sent: 25 September 2011 23:01
> To: Ian Tobin; Xen Users List
> Subject: RE: [Xen-users] Debian 6 as Dom0 not booting on Xen 4.1.1
> 
> 
>  
> 
> Hello,
> 
> Sorry for the late reply but I was doing some testing on recompiling 
> the kernel from scratch.
> Actually I have get rid of the previously described errors. This was 
> by activating again the same two features of DEVTMPFS. Now I honestly 
> am consused when starting
> Dom0 kernel + Xen
> it stops at: Loading, please wait... (never continuing in black
> screen)
> 
> Later booting on - linux + xen + (recovery mode) -, it stops at:
> 
> Loading, please wait... 
> udev [966]: starting version 164
> hrtimer: interrupt took 2701681 ns
> 
> I've found this is a bug in some VMs
> https://lkml.org/lkml/2010/3/30/719
> But the patch doesn't fix anything it just delays what is unavoidable.
> 
> It actually detects the disk controllers because dmesg and lspci 
> report they are working well when booting linux 3.0.0 alone. I have 
> also installed new version of UDEV..
> 172-1 but later downgraded
> to 164-3 since it is unstable and triggered more issues.
> 
> I think there could be an option in the kernel config I should either 
> activate or deactivate which can be related to this.
> 
> Thank you!
> 
> Tony.
> 
>                                    
> ______________________________________________________________________
> Subject: Re: [Xen-users] Debian 6 as Dom0 not booting on Xen 4.1.1
> From: itobin@xxxxxxxxxxxxx
> Date: Sat, 24 Sep 2011 13:53:17 +0100
> To: dftonywhite@xxxxxxxxxxx
> CC: xen-users@xxxxxxxxxxxxxxxxxxx
> 
> Hi,
> 
> 
>  
> 
> 
> Could it be it's not detecting your disk controllers?
> 
> 
>  
> 
> 
> What are you using?
> 
> 
>  
> 
> 
> Thanks
> 
> 
>  
> 
> 
> Ian
> 
>  
> 
> 
> Tidyhosts UK - Server & Web Specialists
> 
> 
>  
> 
> 
> W: www.tidyhosts.com
> 
> 
> E:  enquiries@xxxxxxxxxxxxx
> 
> 
> T:  0871 910 6732
> 
> 
>  
> 
> 
> This email and its attachments are scanned by TidyHosts UK. All emails 
> and attachments should also be scanned by the recipient. TidyHosts UK 
> accept no responsibility for any damage caused by any virus attached 
> to this email.  This email is confidential and is intended only for 
> the addressee(s).
> 
> 
>  
> 
> 
>  
> 
> 
>  
> 
> 
>  
> 
> 
>  
> 
> 
> 
> On 24 Sep 2011, at 08:48, "Antonio Colin" <dftonywhite@xxxxxxxxxxx>
> wrote:
> 
> 
>         Hello Ian,
>         
>         Thanks for your replay! I have just done the same things you
>         did and nothing changed.
>         After booting Xen the same error appears. 
>         
>         I dare to think it is something related either to a .deb
>         package missing or a kernel config
>         option I missed. But what would they be if those can be my
>         mistakes?
>         
>         Thank you
>         
>         Tony.
>         
>                                        
>         ______________________________________________________________
>         Subject: RE: [Xen-users] Debian 6 as Dom0 not booting on Xen
>         4.1.1
>         Date: Fri, 23 Sep 2011 23:43:13 +0100
>         From: itobin@xxxxxxxxxxxxxx
>         To: dftonywhite@xxxxxxxxxxx; xen-users@xxxxxxxxxxxxxxxxxxx
>         CC: 
>         
>         Hi,
>         
>          
>         
>         I had this and couldn’t figure out what is was.  In the end I
>         removed the modules from /lib/modules and the kernel files
>         in /boot then reinstalled and made the new initrd.  Worked
>         after.
>         
>          
>         
>         Thanks
>         
>          
>         
>         Ian
>         
>          
>         
>          
>         
>         From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
>         [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of
>         Antonio Colin
>         Sent: 23 September 2011 23:07
>         To: Xen Users List
>         Subject: [Xen-users] Debian 6 as Dom0 not booting on Xen 4.1.1
>         
>         
>          
>         
>         Hi everyone,
>         
>         I have compiled and installed Linux 3.0.0 and Xen 4.1.1 on
>         Debian Squeeze, both from source and enabling this two
>         options:
>         
>         CONFIG_DEVTMPFS=y
>         CONFIG_DEVTMPFS_MOUNT=y
>         
>         The problem arises when booting Xen. After its startup, it
>         seems that it cannot correctly load Dom0 devices since it
>         says:
>         
>         Loading, please wait...
>         Mount: mounting none on /dev failed: No such device
>         w: devtmpfs not available, falling back to tmpfs for /dev
>         udevd[972]: Worker [978] unexpectedly returned with status
>         0x0100
>         
>         Anyone has an idea of what I am doing wrong? Does it need any
>         package or do I need to rebuild initramfs?
>         
>         Thank you in advance,
>         Tony.
>         
>         
>         
>         _______________________________________________ Xen-users
>         mailing list Xen-users@xxxxxxxxxxxxxxxxxxx
>         http://lists.xensource.com/xen-users
>         
>         
> 
> 
> _______________________________________________ Xen-users mailing list 
> Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
> 
> 
> 
> _______________________________________________ Xen-users mailing list 
> Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users