| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
Re: [Xen-users] XCP : Failed load VDI information on NFS shared repo
|
I bet your VHD is corrupt.
Can you give a bit more SMlog context, i.e. 10 lines above and below?
Can you give dmesg output also.
On 9 September 2011 06:32, Grant McWilliams <grantmasterflash@xxxxxxxxx> wrote:
On Mon, Sep 5, 2011 at 9:04 AM, Ciaran Kendellen <ciaran@xxxxxxxxxxxxxxx> wrote:
Hello there.
I had cause to force shutdown a vm recently and on attempting to restart it I get :
Error code: SR_BACKEND_FAILURE_65
Error parameters: , Failed to load VDI [opterr=Failed load VDI information /var/run/sr-mount/0554f47c-1a12-9bd1-ea9b-d2b68984f0ed/e82a1032-5a0c-4ff7-96cf-1f62f32938db.vhd]
The VDI is on a shared NFS repository, other vm's came back up no problem.
Any ideas what to try anyone?
Thanks in advance,
Ciaran.
___
NFS is sideways. Start at the low layers on the host with the NFS share
and make sure everything is good there first. For instance if you have
more than one NFS mount or you change the mount, or it doesn't mount up
etc. you will get these errors. I got this when I had an SR connected and I shut down NFS, renamed the export and started it back up. The SR sat there twitching until I realised what I did.
Grant McWilliams
http://grantmcwilliams.com/
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home