Hi Rudi,
I think the easiest way to set up a bridge configuration on only one
interface (eth0), is enabling the "(network-script network-bridge)" in
"xend-config.sxp"... this makes a bridge on eth0 directly...
After that, in your cfg file you should add a vif line like this: "vif
= [ 'bridge=eth0, type=ioemu, mac=00:16:3e:00:00:77' ]".
Regards,
Diego
2011/9/8 Rudi Ahlers <Rudi@xxxxxxxxxxx>:
> On Thu, Sep 8, 2011 at 3:37 PM, Christian Motschke
> <christian@xxxxxxxxxxx> wrote:
>>
>> Am 08.09.2011 um 15:15 schrieb Rudi Ahlers:
>>
>>> On Thu, Sep 8, 2011 at 2:06 PM, Christian Motschke
>>> <christian@xxxxxxxxxxx> wrote:
>>>> Do you have libvirt-bin installed?
>>>> Is there the xenbr0 configured (maybe in
>>>> /etc/libvirt/qemu/networks/default.xml)?
>>>> If yes, the bridge will be created on system startup from libvirt???
>>>>
>>>> Regards.
>>>> Christian
>>>>
>>>
>>> Hi Christian,
>>>
>>> libvirt-bin wasn't installed, and I didn't know I should have installed it.
>>>
>>> so I just installed it but how do I get xenbr0 up?
>> If you have defined bridges in /etc/libvirt/qemu and a link from
>> /etc/libvirt/qemu/autostart to the definition exists, than the bridges will
>> be set up with /etc/init.d/libvirt-bin.
>> But I would not suggest to create your bridges with libvirt.
>>
>> You do not need to install libvirt at all. XEN runs fine without it. Only if
>> you would like to manage your VMs with virt-manager, than you need to
>> install it.
>> If libvirt-bin was not installed, than I don't know, what has configured the
>> xenbr0 bridge.
>> Can you grep recursively through /etc to find the definition of xenbr0?
>> The problem is, that your system seems to define xenbr0 with peth0 as
>> network device. peth0 is the renamed eth0 that you also try to use in the
>> bridge definition in /etc/network/interfaces. That's why after a restart of
>> the networking your server looses the connection.
>>
>
>
>
>
>
> Christian I appreciate your attempt to help me, but your making me run
> in circles and confusing me a LOT.
>
>
> So if anyone else can please point me in the right direction to get a
> "xenbr0" bridge setup in Debian Squeeze I would appreciate it.
>
> Surely I can't be the only one using this combination?
>
>
> --
> Kind Regards
> Rudi Ahlers
> SoftDux
>
> Website: http://www.SoftDux.com
> Technical Blog: http://Blog.SoftDux.com
> Office: 087 805 9573
> Cell: 082 554 7532
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home